[PATCH V2 1/6] i2c: Add i2c support to Freescale Layerscape platforms

[PATCH V2 1/6] i2c: Add i2c support to Freescale Layerscape platforms

[Zhiqiang Hou]

From: Shaohui Xie <Shaohui.Xie@freescale.com>

Modify the I2C_IMX config to support to Layerscape platforms.

Signed-off-by: Mingkai Hu <Mingkai.Hu@freescale.com>
Signed-off-by: Wenbin Song <Wenbin.Song@freescale.com>
Signed-off-by: Hou Zhiqiang <B48286@freescale.com>
---
 drivers/i2c/busses/Kconfig | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index 08b8617..14147ec 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -582,10 +582,10 @@ config I2C_IMG
 
 config I2C_IMX
 	tristate "IMX I2C interface"
-	depends on ARCH_MXC
+	depends on ARCH_MXC || ARCH_LAYERSCAPE
 	help
 	  Say Y here if you want to use the IIC bus controller on
-	  the Freescale i.MX/MXC processors.
+	  the Freescale i.MX/MXC or Layerscape processors.
 
 	  This driver can also be built as a module.  If so, the module
 	  will be called i2c-imx.
-- 
2.1.0.27.g96db324

[PATCH V2 2/6] watchdog: Add support for Freescale Layerscape platforms

[Zhiqiang Hou]

From: Shaohui Xie <Shaohui.Xie@freescale.com>

Modify watchdog/Kconfig file to support Layerscape platforms.

Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com>
Signed-off-by: Wenbin Song <Wenbin.Song@freescale.com>
Signed-off-by: Hou Zhiqiang <B48286@freescale.com>
---
 drivers/watchdog/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index c68edc1..2862219 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -446,7 +446,7 @@ config MAX63XX_WATCHDOG
 
 config IMX2_WDT
 	tristate "IMX2+ Watchdog"
-	depends on ARCH_MXC
+	depends on ARCH_MXC || ARCH_LAYERSCAPE
 	select REGMAP_MMIO
 	select WATCHDOG_CORE
 	help
-- 
2.1.0.27.g96db324

[PATCH V2 3/6] Documentation: DT: Add entry for FSL LS1043ARDB board

[Zhiqiang Hou]

From: Mingkai Hu <Mingkai.Hu-KZfg59tc24xl57MIdRCFDg@public.gmane.org>

Signed-off-by: Mingkai Hu <Mingkai.Hu-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
Signed-off-by: Hou Zhiqiang <B48286-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
---
 Documentation/devicetree/bindings/arm/fsl.txt | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/Documentation/devicetree/bindings/arm/fsl.txt b/Documentation/devicetree/bindings/arm/fsl.txt
index 34c88b0..752a685 100644
--- a/Documentation/devicetree/bindings/arm/fsl.txt
+++ b/Documentation/devicetree/bindings/arm/fsl.txt
@@ -131,6 +131,10 @@ Example:
 Freescale ARMv8 based Layerscape SoC family Device Tree Bindings
 ----------------------------------------------------------------
 
+LS1043A ARMv8 based RDB Board
+Required root node properties:
+    - compatible = "fsl,ls1043a-rdb", "fsl,ls1043a";
+
 LS2080A ARMv8 based Simulator model
 Required root node properties:
     - compatible = "fsl,ls2080a-simu", "fsl,ls2080a";
-- 
2.1.0.27.g96db324

--
To unsubscribe from this list: send the line "unsubscribe linux-watchdog" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH V2 4/6] arm64/ls1043a: add DTS for Freescale LS1043A SoC

[Zhiqiang Hou]

From: Mingkai Hu <Mingkai.Hu@freescale.com>

LS1043a is an SoC with 4 ARMv8 A53 cores and most other IP blocks
similar to LS1021a which complies to Chassis 2.1 spec.

Following levels of DTSI/DTS files have been created for the
LS1043A SoC family:

- fsl-ls1043a.dtsi:
  DTS-Include file for FSL LS1043A SoC.

Signed-off-by: Li Yang <leoli@freescale.com>
Signed-off-by: Hou Zhiqiang <B48286@freescale.com>
Signed-off-by: Mingkai Hu <Mingkai.Hu@freescale.com>
Signed-off-by: Wenbin Song <Wenbin.Song@freescale.com>
---
v2:
 - Add secondary core boot method.
 - Move out the sysclk node from the clockgen node.
 - Correct the reg size of GICC.

 arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi | 510 +++++++++++++++++++++++++
 1 file changed, 510 insertions(+)
 create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi

diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
new file mode 100644
index 0000000..5bc5d13
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
@@ -0,0 +1,510 @@
+/*
+ * Device Tree Include file for Freescale Layerscape-1043A family SoC.
+ *
+ * Copyright 2014-2015, Freescale Semiconductor
+ *
+ * Mingkai Hu <Mingkai.hu@freescale.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPLv2 or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/memreserve/ 0x80000000 0x00010000;
+
+/ {
+	compatible = "fsl,ls1043a";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x0>;
+			clocks = <&clockgen 1 0>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0x0 0x80000000>;
+		};
+
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x1>;
+			clocks = <&clockgen 1 0>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0x0 0x80000000>;
+		};
+
+		cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x2>;
+			clocks = <&clockgen 1 0>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0x0 0x80000000>;
+		};
+
+		cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x3>;
+			clocks = <&clockgen 1 0>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0x0 0x80000000>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <1 13 0x1>, /* Physical Secure PPI */
+			     <1 14 0x1>, /* Physical Non-Secure PPI */
+			     <1 11 0x1>, /* Virtual PPI */
+			     <1 10 0x1>; /* Hypervisor PPI */
+	};
+
+	pmu {
+		compatible = "arm,armv8-pmuv3";
+		interrupts = <0 106 0x4>,
+			     <0 107 0x4>,
+			     <0 95 0x4>,
+			     <0 97 0x4>;
+	};
+
+	gic: interrupt-controller@1400000 {
+		compatible = "arm,gic-400";
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		reg = <0x0 0x1401000 0 0x1000>, /* GICD */
+		      <0x0 0x1402000 0 0x2000>, /* GICC */
+		      <0x0 0x1404000 0 0x2000>, /* GICH */
+		      <0x0 0x1406000 0 0x2000>; /* GICV */
+		interrupts = <1 9 0xf08>;
+	};
+
+	msi1: msi-controller1@1571000 {
+		compatible = "fsl,1s1043a-msi";
+		reg = <0x0 0x1571000 0x0 0x4>,
+		      <0x0 0x1571004 0x0 0x4>;
+		reg-names = "msiir", "msir";
+		msi-controller;
+		interrupts = <0 116 0x4>;
+	};
+
+	msi2: msi-controller2@1572000 {
+		compatible = "fsl,1s1043a-msi";
+		reg = <0x0 0x1572000 0x0 0x4>,
+		      <0x0 0x1572004 0x0 0x4>;
+		reg-names = "msiir", "msir";
+		msi-controller;
+		interrupts = <0 126 0x4>;
+	};
+
+	msi3: msi-controller3@1573000 {
+		compatible = "fsl,1s1043a-msi";
+		reg = <0x0 0x1573000 0x0 0x4>,
+		      <0x0 0x1573004 0x0 0x4>;
+		reg-names = "msiir", "msir";
+		msi-controller;
+		interrupts = <0 160 0x4>;
+	};
+
+	ifc: ifc@1530000 {
+		compatible = "fsl,ifc", "simple-bus";
+		reg = <0x0 0x1530000 0x0 0x10000>;
+		interrupts = <0 43 0x4>;
+	};
+
+	esdhc: esdhc@1560000 {
+		compatible = "fsl,ls1043a-esdhc", "fsl,esdhc";
+		reg = <0x0 0x1560000 0x0 0x10000>;
+		interrupts = <0 62 0x4>;
+		clock-frequency = <0>;
+		voltage-ranges = <1800 1800 3300 3300>;
+		sdhci,auto-cmd12;
+		big-endian;
+		bus-width = <4>;
+	};
+
+	scfg: scfg@1570000 {
+		compatible = "fsl,ls1043a-scfg", "syscon";
+		reg = <0x0 0x1570000 0x0 0x10000>;
+		big-endian;
+	};
+
+	dcfg: dcfg@1ee0000 {
+		compatible = "fsl,ls1043a-dcfg", "syscon";
+		reg = <0x0 0x1ee0000 0x0 0x10000>;
+	};
+
+	clockgen: clocking@1ee1000 {
+		compatible = "fsl,ls1043a-clockgen";
+		reg = <0x0 0x1ee1000 0x0 0x1000>;
+		#clock-cells = <2>;
+		clocks = <&sysclk>;
+	};
+
+	sysclk: sysclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <100000000>;
+		clock-output-names = "sysclk";
+	};
+
+	dspi0: dspi@2100000 {
+		compatible = "fsl,ls1043a-dspi", "fsl,ls1021a-v1.0-dspi";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x0 0x2100000 0x0 0x10000>;
+		interrupts = <0 64 0x4>;
+		clock-names = "dspi";
+		clocks = <&clockgen 4 0>;
+		spi-num-chipselects = <5>;
+		big-endian;
+		status = "disabled";
+	};
+
+	dspi1: dspi@2110000 {
+		compatible = "fsl,ls1043a-dspi", "fsl,ls1021a-v1.0-dspi";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x0 0x2110000 0x0 0x10000>;
+		interrupts = <0 65 0x4>;
+		clock-names = "dspi";
+		clocks = <&clockgen 4 0>;
+		spi-num-chipselects = <5>;
+		big-endian;
+		status = "disabled";
+	};
+
+	i2c0: i2c@2180000 {
+		compatible = "fsl,vf610-i2c";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x0 0x2180000 0x0 0x10000>;
+		interrupts = <0 56 0x4>;
+		clock-names = "i2c";
+		clocks = <&clockgen 4 0>;
+		dmas = <&edma0 1 39>,
+		       <&edma0 1 38>;
+		dma-names = "tx", "rx";
+		status = "disabled";
+	};
+
+	i2c1: i2c@2190000 {
+		compatible = "fsl,vf610-i2c";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x0 0x2190000 0x0 0x10000>;
+		interrupts = <0 57 0x4>;
+		clock-names = "i2c";
+		clocks = <&clockgen 4 0>;
+		status = "disabled";
+	};
+
+	i2c2: i2c@21a0000 {
+		compatible = "fsl,vf610-i2c";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x0 0x21a0000 0x0 0x10000>;
+		interrupts = <0 58 0x4>;
+		clock-names = "i2c";
+		clocks = <&clockgen 4 0>;
+		status = "disabled";
+	};
+
+	i2c3: i2c@21b0000 {
+		compatible = "fsl,vf610-i2c";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x0 0x21b0000 0x0 0x10000>;
+		interrupts = <0 59 0x4>;
+		clock-names = "i2c";
+		clocks = <&clockgen 4 0>;
+		status = "disabled";
+	};
+
+	duart0: serial@21c0500 {
+		compatible = "fsl,ns16550", "ns16550a";
+		reg = <0x00 0x21c0500 0x0 0x100>;
+		interrupts = <0 54 0x4>;
+		clocks = <&clockgen 4 0>;
+	};
+
+	duart1: serial@21c0600 {
+		compatible = "fsl,ns16550", "ns16550a";
+		reg = <0x00 0x21c0600 0x0 0x100>;
+		interrupts = <0 54 0x4>;
+		clocks = <&clockgen 4 0>;
+	};
+
+	duart2: serial@21d0500 {
+		compatible = "fsl,ns16550", "ns16550a";
+		reg = <0x0 0x21d0500 0x0 0x100>;
+		interrupts = <0 55 0x4>;
+		clocks = <&clockgen 4 0>;
+	};
+
+	duart3: serial@21d0600 {
+		compatible = "fsl,ns16550", "ns16550a";
+		reg = <0x0 0x21d0600 0x0 0x100>;
+		interrupts = <0 55 0x4>;
+		clocks = <&clockgen 4 0>;
+	};
+
+	gpio1: gpio@2300000 {
+		compatible = "fsl,ls1043a-gpio";
+		reg = <0x0 0x2300000 0x0 0x10000>;
+		interrupts = <0 66 0x4>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpio2: gpio@2310000 {
+		compatible = "fsl,ls1043a-gpio";
+		reg = <0x0 0x2310000 0x0 0x10000>;
+		interrupts = <0 67 0x4>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpio3: gpio@2320000 {
+		compatible = "fsl,ls1043a-gpio";
+		reg = <0x0 0x2320000 0x0 0x10000>;
+		interrupts = <0 68 0x4>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpio4: gpio@2330000 {
+		compatible = "fsl,ls1043a-gpio";
+		reg = <0x0 0x2330000 0x0 0x10000>;
+		interrupts = <0 134 0x4>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	lpuart0: serial@2950000 {
+		compatible = "fsl,ls1021a-lpuart";
+		reg = <0x0 0x2950000 0x0 0x1000>;
+		interrupts = <0 48 0x4>;
+		clocks = <&clockgen 0 0>;
+		clock-names = "ipg";
+		status = "disabled";
+	};
+
+	lpuart1: serial@2960000 {
+		compatible = "fsl,ls1021a-lpuart";
+		reg = <0x0 0x2960000 0x0 0x1000>;
+		interrupts = <0 49 0x4>;
+		clocks = <&clockgen 4 0>;
+		clock-names = "ipg";
+		status = "disabled";
+	};
+
+	lpuart2: serial@2970000 {
+		compatible = "fsl,ls1021a-lpuart";
+		reg = <0x0 0x2970000 0x0 0x1000>;
+		interrupts = <0 50 0x4>;
+		clocks = <&clockgen 4 0>;
+		clock-names = "ipg";
+		status = "disabled";
+	};
+
+	lpuart3: serial@2980000 {
+		compatible = "fsl,ls1021a-lpuart";
+		reg = <0x0 0x2980000 0x0 0x1000>;
+		interrupts = <0 51 0x4>;
+		clocks = <&clockgen 4 0>;
+		clock-names = "ipg";
+		status = "disabled";
+	};
+
+	lpuart4: serial@2990000 {
+		compatible = "fsl,ls1021a-lpuart";
+		reg = <0x0 0x2990000 0x0 0x1000>;
+		interrupts = <0 52 0x4>;
+		clocks = <&clockgen 4 0>;
+		clock-names = "ipg";
+		status = "disabled";
+	};
+
+	lpuart5: serial@29a0000 {
+		compatible = "fsl,ls1021a-lpuart";
+		reg = <0x0 0x29a0000 0x0 0x1000>;
+		interrupts = <0 53 0x4>;
+		clocks = <&clockgen 4 0>;
+		clock-names = "ipg";
+		status = "disabled";
+	};
+
+	wdog0: wdog@2ad0000 {
+		compatible = "fsl,ls1043a-wdt", "fsl,imx21-wdt";
+		reg = <0x0 0x2ad0000 0x0 0x10000>;
+		interrupts = <0 83 0x4>;
+		clocks = <&clockgen 4 0>;
+		clock-names = "wdog";
+		big-endian;
+	};
+
+	edma0: edma@2c00000 {
+		#dma-cells = <2>;
+		compatible = "fsl,vf610-edma";
+		reg = <0x0 0x2c00000 0x0 0x10000>,
+		      <0x0 0x2c10000 0x0 0x10000>,
+		      <0x0 0x2c20000 0x0 0x10000>;
+		interrupts = <0 103 0x4>,
+			     <0 103 0x4>;
+		interrupt-names = "edma-tx", "edma-err";
+		dma-channels = <32>;
+		big-endian;
+		clock-names = "dmamux0", "dmamux1";
+		clocks = <&clockgen 4 0>,
+			 <&clockgen 4 0>;
+	};
+
+	usb0: usb3@2f00000 {
+		compatible = "snps,dwc3";
+		reg = <0x0 0x2f00000 0x0 0x10000>;
+		interrupts = <0 60 0x4>;
+		dr_mode = "host";
+	};
+
+	usb1: usb3@3000000 {
+		compatible = "snps,dwc3";
+		reg = <0x0 0x3000000 0x0 0x10000>;
+		interrupts = <0 61 0x4>;
+		dr_mode = "host";
+	};
+	usb2: usb3@3100000 {
+		compatible = "snps,dwc3";
+		reg = <0x0 0x3100000 0x0 0x10000>;
+		interrupts = <0 63 0x4>;
+		dr_mode = "host";
+	};
+
+	pcie@3400000 {
+		compatible = "fsl,ls1043a-pcie", "snps,dw-pcie";
+		reg = <0x00 0x03400000 0x0 0x00100000   /* controller registers */
+		       0x40 0x00000000 0x0 0x00002000>; /* configuration space */
+		reg-names = "regs", "config";
+		interrupts = <0 118 0x4>, /* controller interrupt */
+			     <0 117 0x4>; /* PME interrupt */
+		interrupt-names = "intr", "pme";
+		#address-cells = <3>;
+		#size-cells = <2>;
+		device_type = "pci";
+		num-lanes = <4>;
+		bus-range = <0x0 0xff>;
+		ranges = <0x81000000 0x0 0x00000000 0x40 0x00010000 0x0 0x00010000   /* downstream I/O */
+			  0x82000000 0x0 0x40000000 0x40 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
+		msi-parent = <&msi1>;
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 0 7>;
+		interrupt-map = <0000 0 0 1 &gic 0 110 0x4>,
+				<0000 0 0 2 &gic 0 111 0x4>,
+				<0000 0 0 3 &gic 0 112 0x4>,
+				<0000 0 0 4 &gic 0 113 0x4>;
+	};
+
+	pcie@3500000 {
+		compatible = "fsl,ls1043a-pcie", "snps,dw-pcie";
+		reg = <0x00 0x03500000 0x0 0x00100000   /* controller registers */
+		       0x48 0x00000000 0x0 0x00002000>; /* configuration space */
+		reg-names = "regs", "config";
+		interrupts = <0 128 0x4>,
+			     <0 127 0x4>;
+		interrupt-names = "intr", "pme";
+		#address-cells = <3>;
+		#size-cells = <2>;
+		device_type = "pci";
+		num-lanes = <2>;
+		bus-range = <0x0 0xff>;
+		ranges = <0x81000000 0x0 0x00000000 0x48 0x00010000 0x0 0x00010000   /* downstream I/O */
+			  0x82000000 0x0 0x40000000 0x48 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
+		msi-parent = <&msi2>;
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 0 7>;
+		interrupt-map = <0000 0 0 1 &gic 0 120  0x4>,
+				<0000 0 0 2 &gic 0 121 0x4>,
+				<0000 0 0 3 &gic 0 122 0x4>,
+				<0000 0 0 4 &gic 0 123 0x4>;
+	};
+
+	pcie@3600000 {
+		compatible = "fsl,ls1043a-pcie", "snps,dw-pcie";
+		reg = <0x00 0x03600000 0x0 0x00100000   /* controller registers */
+		       0x50 0x00000000 0x0 0x00002000>; /* configuration space */
+		reg-names = "regs", "config";
+		interrupts = <0 162 0x4>,
+			     <0 161 0x4>;
+		interrupt-names = "intr", "pme";
+		#address-cells = <3>;
+		#size-cells = <2>;
+		device_type = "pci";
+		num-lanes = <2>;
+		bus-range = <0x0 0xff>;
+		ranges = <0x81000000 0x0 0x00000000 0x50 0x00010000 0x0 0x00010000   /* downstream I/O */
+			  0x82000000 0x0 0x40000000 0x50 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
+		msi-parent = <&msi3>;
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 0 7>;
+		interrupt-map = <0000 0 0 1 &gic 0 154 0x4>,
+				<0000 0 0 2 &gic 0 155 0x4>,
+				<0000 0 0 3 &gic 0 156 0x4>,
+				<0000 0 0 4 &gic 0 157 0x4>;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x0 0x80000000 0 0x80000000>;
+		      /* DRAM space 1 - 2 GB DRAM */
+	};
+
+};
-- 
2.1.0.27.g96db324

[PATCH V2 5/6] clk: qoriq: Add ls1043a support.

[Zhiqiang Hou]

From: Hou Zhiqiang <B48286-KZfg59tc24xl57MIdRCFDg@public.gmane.org>

Signed-off-by: Hou Zhiqiang <B48286-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
---
 drivers/clk/clk-qoriq.c | 38 ++++++++++++++++++++++++++++++++++++++
 1 file changed, 38 insertions(+)

diff --git a/drivers/clk/clk-qoriq.c b/drivers/clk/clk-qoriq.c
index 7753fa3..e71927b 100644
--- a/drivers/clk/clk-qoriq.c
+++ b/drivers/clk/clk-qoriq.c
@@ -244,6 +244,28 @@ static const struct clockgen_muxinfo clockgen2_cmux_cgb = {
 	},
 };
 
+static const struct clockgen_muxinfo ls1043a_hwa1 = {
+	{
+		{},
+		{},
+		{ CLKSEL_VALID, CGA_PLL1, PLL_DIV2 },
+		{ CLKSEL_VALID, CGA_PLL1, PLL_DIV3 },
+		{},
+		{},
+		{ CLKSEL_VALID, CGA_PLL2, PLL_DIV2 },
+		{ CLKSEL_VALID, CGA_PLL2, PLL_DIV3 },
+	},
+};
+
+static const struct clockgen_muxinfo ls1043a_hwa2 = {
+	{
+		{},
+		{ CLKSEL_VALID, CGA_PLL2, PLL_DIV1 },
+		{},
+		{ CLKSEL_VALID, CGA_PLL2, PLL_DIV3 },
+	},
+};
+
 static const struct clockgen_muxinfo t1023_hwa1 = {
 	{
 		{},
@@ -452,6 +474,21 @@ static const struct clockgen_chipinfo chipinfo[] = {
 		.pll_mask = 0x03,
 	},
 	{
+		.compat = "fsl,ls1043a-clockgen",
+		.init_periph = t2080_init_periph,
+		.cmux_groups = {
+			&t1040_cmux
+		},
+		.hwaccel = {
+			&ls1043a_hwa1, &ls1043a_hwa2
+		},
+		.cmux_to_group = {
+			0, -1
+		},
+		.pll_mask = 0x07,
+		.flags = CG_PLL_8BIT,
+	},
+	{
 		.compat = "fsl,ls2080a-clockgen",
 		.cmux_groups = {
 			&clockgen2_cmux_cga12, &clockgen2_cmux_cgb
@@ -1228,6 +1265,7 @@ err:
 CLK_OF_DECLARE(qoriq_clockgen_1, "fsl,qoriq-clockgen-1.0", clockgen_init);
 CLK_OF_DECLARE(qoriq_clockgen_2, "fsl,qoriq-clockgen-2.0", clockgen_init);
 CLK_OF_DECLARE(qoriq_clockgen_ls1021a, "fsl,ls1021a-clockgen", clockgen_init);
+CLK_OF_DECLARE(qoriq_clockgen_ls1043a, "fsl,ls1043a-clockgen", clockgen_init);
 CLK_OF_DECLARE(qoriq_clockgen_ls2080a, "fsl,ls2080a-clockgen", clockgen_init);
 
 /* Legacy nodes */
-- 
2.1.0.27.g96db324

--
To unsubscribe from this list: send the line "unsubscribe linux-watchdog" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH V2 6/6] dts/ls1043a: add LS1043ARDB board support

[Zhiqiang Hou]

From: Shaohui Xie <Shaohui.Xie@freescale.com>

Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com>
Signed-off-by: Mingkai Hu <Mingkai.Hu@freescale.com>
Signed-off-by: Wenbin Song <Wenbin.Song@freescale.com>
Signed-off-by: Hou Zhiqiang <B48286@freescale.com>
---
v2:
 - Remove the useless compatible "simple-bus" from cpld node.

 arch/arm64/boot/dts/freescale/Makefile            |   2 +-
 arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts | 116 ++++++++++++++++++++++
 2 files changed, 117 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts

diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
index 57b41c7..33b1e57 100644
--- a/arch/arm64/boot/dts/freescale/Makefile
+++ b/arch/arm64/boot/dts/freescale/Makefile
@@ -1,4 +1,4 @@
-dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2080a-qds.dtb fsl-ls2080a-rdb.dtb fsl-ls2080a-simu.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2080a-qds.dtb fsl-ls2080a-rdb.dtb fsl-ls2080a-simu.dtb fsl-ls1043a-rdb.dtb
  
 always		:= $(dtb-y)
 subdir-y	:= $(dts-dirs)
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts
new file mode 100644
index 0000000..7a351e2
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts
@@ -0,0 +1,116 @@
+/*
+ * Device Tree Include file for Freescale Layerscape-1043A family SoC.
+ *
+ * Copyright 2014-2015, Freescale Semiconductor
+ *
+ * Mingkai Hu <Mingkai.hu@freescale.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPLv2 or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "fsl-ls1043a.dtsi"
+
+/ {
+	model = "LS1043A RDB Board";
+};
+
+&i2c0 {
+	status = "okay";
+	ina220@40 {
+		compatible = "ti,ina220";
+		reg = <0x40>;
+		shunt-resistor = <1000>;
+	};
+	adt7461a@4c {
+		compatible = "adi,adt7461";
+		reg = <0x4c>;
+	};
+	eeprom@56 {
+		compatible = "at24,24c512";
+		reg = <0x52>;
+	};
+	eeprom@57 {
+		compatible = "at24,24c512";
+		reg = <0x53>;
+	};
+	rtc@68 {
+		compatible = "pericom,pt7c4338";
+		reg = <0x68>;
+	};
+};
+
+&ifc {
+	status = "okay";
+	#address-cells = <2>;
+	#size-cells = <1>;
+	/* NOR, NAND Flashes and FPGA on board */
+	ranges = <0x0 0x0 0x0 0x60000000 0x08000000
+		  0x1 0x0 0x0 0x7e800000 0x00010000
+		  0x2 0x0 0x0 0x7fb00000 0x00000100>;
+
+		nor@0,0 {
+			compatible = "cfi-flash";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x0 0x0 0x8000000>;
+			bank-width = <2>;
+			device-width = <1>;
+		};
+
+		nand@1,0 {
+			compatible = "fsl,ifc-nand";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x1 0x0 0x10000>;
+		};
+
+		cpld: board-control@2,0 {
+			compatible = "fsl,ls1043ardb-cpld";
+			reg = <0x2 0x0 0x0000100>;
+		};
+};
+
+&duart0 {
+	status = "okay";
+};
+
+&duart1 {
+	status = "okay";
+};
-- 
2.1.0.27.g96db324