From: Mika Westerberg <mika.westerberg@linux.intel.com>
To: Jean Delvare <jdelvare@suse.com>, Wolfram Sang <wsa@the-dreams.de>
Cc: linux-i2c@vger.kernel.org,
Mika Westerberg <mika.westerberg@linux.intel.com>,
Jarkko Nikula <jarkko.nikula@linux.intel.com>
Subject: [PATCH] i2c: i801: Add support for Intel DNV
Date: Tue, 13 Oct 2015 15:41:39 +0300 [thread overview]
Message-ID: <1444740099-137792-1-git-send-email-mika.westerberg@linux.intel.com> (raw)
Intel DNV SoC has the same legacy SMBus host controller than Intel
Sunrisepoint PCH. It also has same iTCO watchdog on the bus.
Add DNV PCI ID to the list of supported devices.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
---
drivers/i2c/busses/i2c-i801.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c
index eaef9bc9d88c..47c2ddf76264 100644
--- a/drivers/i2c/busses/i2c-i801.c
+++ b/drivers/i2c/busses/i2c-i801.c
@@ -60,6 +60,7 @@
* BayTrail (SOC) 0x0f12 32 hard yes yes yes
* Sunrise Point-H (PCH) 0xa123 32 hard yes yes yes
* Sunrise Point-LP (PCH) 0x9d23 32 hard yes yes yes
+ * DNV (SOC) 0x19df 32 hard yes yes yes
*
* Features supported by this driver:
* Software PEC no
@@ -202,6 +203,7 @@
#define PCI_DEVICE_ID_INTEL_WILDCATPOINT_LP_SMBUS 0x9ca2
#define PCI_DEVICE_ID_INTEL_SUNRISEPOINT_H_SMBUS 0xa123
#define PCI_DEVICE_ID_INTEL_SUNRISEPOINT_LP_SMBUS 0x9d23
+#define PCI_DEVICE_ID_INTEL_DNV_SMBUS 0x19df
struct i801_mux_config {
char *gpio_chip;
@@ -863,6 +865,7 @@ static const struct pci_device_id i801_ids[] = {
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_BRASWELL_SMBUS) },
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_SUNRISEPOINT_H_SMBUS) },
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_SUNRISEPOINT_LP_SMBUS) },
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_DNV_SMBUS) },
{ 0, }
};
@@ -1256,6 +1259,7 @@ static int i801_probe(struct pci_dev *dev, const struct pci_device_id *id)
switch (dev->device) {
case PCI_DEVICE_ID_INTEL_SUNRISEPOINT_H_SMBUS:
case PCI_DEVICE_ID_INTEL_SUNRISEPOINT_LP_SMBUS:
+ case PCI_DEVICE_ID_INTEL_DNV_SMBUS:
priv->features |= FEATURE_I2C_BLOCK_READ;
priv->features |= FEATURE_IRQ;
priv->features |= FEATURE_SMBUS_PEC;
--
2.5.3
next reply other threads:[~2015-10-13 12:41 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-10-13 12:41 Mika Westerberg [this message]
2015-10-23 20:11 ` [PATCH] i2c: i801: Add support for Intel DNV Wolfram Sang
2015-10-25 10:45 ` Jean Delvare
2015-10-26 9:24 ` Mika Westerberg
2015-10-26 10:49 ` Wolfram Sang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1444740099-137792-1-git-send-email-mika.westerberg@linux.intel.com \
--to=mika.westerberg@linux.intel.com \
--cc=jarkko.nikula@linux.intel.com \
--cc=jdelvare@suse.com \
--cc=linux-i2c@vger.kernel.org \
--cc=wsa@the-dreams.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).