From: Bartosz Golaszewski <bgolaszewski@baylibre.com>
To: Wolfram Sang <wsa@the-dreams.de>
Cc: linux-i2c <linux-i2c@vger.kernel.org>,
LKML <linux-kernel@vger.kernel.org>,
Bartosz Golaszewski <bgolaszewski@baylibre.com>
Subject: [RESEND PATCH 6/9] eeprom: at24: improve the device_id table readability
Date: Tue, 20 Oct 2015 10:43:24 +0200 [thread overview]
Message-ID: <1445330607-12470-7-git-send-email-bgolaszewski@baylibre.com> (raw)
In-Reply-To: <1445330607-12470-1-git-send-email-bgolaszewski@baylibre.com>
Improve the readability of the device table by separating columns with
tabs.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
---
drivers/misc/eeprom/at24.c | 28 ++++++++++++++--------------
1 file changed, 14 insertions(+), 14 deletions(-)
diff --git a/drivers/misc/eeprom/at24.c b/drivers/misc/eeprom/at24.c
index 0eded22..0d34b94 100644
--- a/drivers/misc/eeprom/at24.c
+++ b/drivers/misc/eeprom/at24.c
@@ -113,23 +113,23 @@ MODULE_PARM_DESC(write_timeout, "Time (in ms) to try writes (default 25)");
static const struct i2c_device_id at24_ids[] = {
/* needs 8 addresses as A0-A2 are ignored */
- { "24c00", AT24_DEVICE_MAGIC(128 / 8, AT24_FLAG_TAKE8ADDR) },
+ { "24c00", AT24_DEVICE_MAGIC(128 / 8, AT24_FLAG_TAKE8ADDR) },
/* old variants can't be handled with this generic entry! */
- { "24c01", AT24_DEVICE_MAGIC(1024 / 8, 0) },
- { "24c02", AT24_DEVICE_MAGIC(2048 / 8, 0) },
+ { "24c01", AT24_DEVICE_MAGIC(1024 / 8, 0) },
+ { "24c02", AT24_DEVICE_MAGIC(2048 / 8, 0) },
/* spd is a 24c02 in memory DIMMs */
- { "spd", AT24_DEVICE_MAGIC(2048 / 8,
- AT24_FLAG_READONLY | AT24_FLAG_IRUGO) },
- { "24c04", AT24_DEVICE_MAGIC(4096 / 8, 0) },
+ { "spd", AT24_DEVICE_MAGIC(2048 / 8,
+ AT24_FLAG_READONLY | AT24_FLAG_IRUGO) },
+ { "24c04", AT24_DEVICE_MAGIC(4096 / 8, 0) },
/* 24rf08 quirk is handled at i2c-core */
- { "24c08", AT24_DEVICE_MAGIC(8192 / 8, 0) },
- { "24c16", AT24_DEVICE_MAGIC(16384 / 8, 0) },
- { "24c32", AT24_DEVICE_MAGIC(32768 / 8, AT24_FLAG_ADDR16) },
- { "24c64", AT24_DEVICE_MAGIC(65536 / 8, AT24_FLAG_ADDR16) },
- { "24c128", AT24_DEVICE_MAGIC(131072 / 8, AT24_FLAG_ADDR16) },
- { "24c256", AT24_DEVICE_MAGIC(262144 / 8, AT24_FLAG_ADDR16) },
- { "24c512", AT24_DEVICE_MAGIC(524288 / 8, AT24_FLAG_ADDR16) },
- { "24c1024", AT24_DEVICE_MAGIC(1048576 / 8, AT24_FLAG_ADDR16) },
+ { "24c08", AT24_DEVICE_MAGIC(8192 / 8, 0) },
+ { "24c16", AT24_DEVICE_MAGIC(16384 / 8, 0) },
+ { "24c32", AT24_DEVICE_MAGIC(32768 / 8, AT24_FLAG_ADDR16) },
+ { "24c64", AT24_DEVICE_MAGIC(65536 / 8, AT24_FLAG_ADDR16) },
+ { "24c128", AT24_DEVICE_MAGIC(131072 / 8, AT24_FLAG_ADDR16) },
+ { "24c256", AT24_DEVICE_MAGIC(262144 / 8, AT24_FLAG_ADDR16) },
+ { "24c512", AT24_DEVICE_MAGIC(524288 / 8, AT24_FLAG_ADDR16) },
+ { "24c1024", AT24_DEVICE_MAGIC(1048576 / 8, AT24_FLAG_ADDR16) },
{ "at24", 0 },
{ /* END OF LIST */ }
};
--
2.1.4
next prev parent reply other threads:[~2015-10-20 8:43 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-10-20 8:43 [RESEND PATCH 0/9] eeprom: at24: at24cs series serial number read Bartosz Golaszewski
2015-10-20 8:43 ` [RESEND PATCH 1/9] eeprom: at24: platform_data: use BIT() macro Bartosz Golaszewski
2015-10-20 8:43 ` [RESEND PATCH 2/9] eeprom: at24: new flag in platform_data Bartosz Golaszewski
2015-10-20 8:43 ` [RESEND PATCH 3/9] eeprom: at24: tie up an additional address for at24cs series Bartosz Golaszewski
2015-10-20 8:43 ` [RESEND PATCH 4/9] eeprom: at24: support reading of the serial number Bartosz Golaszewski
2015-10-20 8:43 ` [RESEND PATCH 5/9] eeprom: at24: export the serial number through sysfs Bartosz Golaszewski
2015-10-20 8:43 ` Bartosz Golaszewski [this message]
2015-10-20 8:43 ` [RESEND PATCH 7/9] eeprom: at24: add the at24cs series to the list of supported devices Bartosz Golaszewski
2015-10-20 8:43 ` [RESEND PATCH 8/9] eeprom: at24: remove a reduntant if Bartosz Golaszewski
2015-10-20 8:43 ` [RESEND PATCH 9/9] eeprom: at24: readability tweaks Bartosz Golaszewski
2015-10-21 11:03 ` [RESEND PATCH 0/9] eeprom: at24: at24cs series serial number read Peter Korsgaard
2015-10-21 14:15 ` Bartosz Golaszewski
2015-10-21 14:23 ` Peter Korsgaard
2015-10-21 14:42 ` Bartosz Golaszewski
2015-10-21 15:08 ` Peter Korsgaard
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1445330607-12470-7-git-send-email-bgolaszewski@baylibre.com \
--to=bgolaszewski@baylibre.com \
--cc=linux-i2c@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=wsa@the-dreams.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).