linux-i2c.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Christian Fetzer <fetzer.ch@gmail.com>
To: linux-i2c@vger.kernel.org
Cc: Jarkko Nikula <jarkko.nikula@linux.intel.com>,
	Andy Shevchenko <andriy.shevchenko@linux.intel.com>,
	Mika Westerberg <mika.westerberg@linux.intel.com>,
	Wolfram Sang <wsa@the-dreams.de>,
	galandilias@gmail.com, Christian Fetzer <fetzer.ch@gmail.com>
Subject: [PATCH v2 3/5] i2c-piix4: Request base address index region once for SB800
Date: Sun,  1 Nov 2015 17:32:07 +0100	[thread overview]
Message-ID: <1446395529-9987-4-git-send-email-fetzer.ch@gmail.com> (raw)
In-Reply-To: <1446395529-9987-1-git-send-email-fetzer.ch@gmail.com>

Request the SMBus base address index region once in piix4_probe. This
is particularly useful when using the multiplexed adapter in SB800 as
it avoids requesting and releasing the region on every transfer.

Signed-off-by: Christian Fetzer <fetzer.ch@gmail.com>
---
 drivers/i2c/busses/i2c-piix4.c | 35 ++++++++++++++++++++++-------------
 1 file changed, 22 insertions(+), 13 deletions(-)

diff --git a/drivers/i2c/busses/i2c-piix4.c b/drivers/i2c/busses/i2c-piix4.c
index 35eeb0d..d866b58 100644
--- a/drivers/i2c/busses/i2c-piix4.c
+++ b/drivers/i2c/busses/i2c-piix4.c
@@ -125,6 +125,9 @@ static const struct dmi_system_id piix4_dmi_ibm[] = {
 	{ },
 };
 
+/* SB800 globals */
+static unsigned short piix4_smb_idx_sb800;
+
 struct i2c_piix4_adapdata {
 	unsigned short smba;
 };
@@ -232,7 +235,6 @@ static int piix4_setup_sb800(struct pci_dev *PIIX4_dev,
 			     const struct pci_device_id *id, u8 aux)
 {
 	unsigned short piix4_smba;
-	unsigned short smba_idx = 0xcd6;
 	u8 smba_en_lo, smba_en_hi, smb_en, smb_en_status;
 	u8 i2ccfg, i2ccfg_offset = 0x10;
 
@@ -254,16 +256,10 @@ static int piix4_setup_sb800(struct pci_dev *PIIX4_dev,
 	else
 		smb_en = (aux) ? 0x28 : 0x2c;
 
-	if (!request_region(smba_idx, 2, "smba_idx")) {
-		dev_err(&PIIX4_dev->dev, "SMBus base address index region "
-			"0x%x already in use!\n", smba_idx);
-		return -EBUSY;
-	}
-	outb_p(smb_en, smba_idx);
-	smba_en_lo = inb_p(smba_idx + 1);
-	outb_p(smb_en + 1, smba_idx);
-	smba_en_hi = inb_p(smba_idx + 1);
-	release_region(smba_idx, 2);
+	outb_p(smb_en, piix4_smb_idx_sb800);
+	smba_en_lo = inb_p(piix4_smb_idx_sb800 + 1);
+	outb_p(smb_en + 1, piix4_smb_idx_sb800);
+	smba_en_hi = inb_p(piix4_smb_idx_sb800 + 1);
 
 	if (!smb_en) {
 		smb_en_status = smba_en_lo & 0x10;
@@ -616,16 +612,26 @@ static int piix4_add_adapter(struct pci_dev *dev, unsigned short smba,
 
 static int piix4_probe(struct pci_dev *dev, const struct pci_device_id *id)
 {
+	unsigned short smba_idx = 0xcd6;
 	int retval;
 
 	if ((dev->vendor == PCI_VENDOR_ID_ATI &&
 	     dev->device == PCI_DEVICE_ID_ATI_SBX00_SMBUS &&
 	     dev->revision >= 0x40) ||
-	    dev->vendor == PCI_VENDOR_ID_AMD)
+	    dev->vendor == PCI_VENDOR_ID_AMD) {
+
+		if (!request_region(smba_idx, 2, "smba_idx")) {
+			dev_err(&dev->dev, "SMBus base address index region "
+				"0x%x already in use!\n", smba_idx);
+			return -EBUSY;
+		}
+		piix4_smb_idx_sb800 = smba_idx;
+
 		/* base address location etc changed in SB800 */
 		retval = piix4_setup_sb800(dev, id, 0);
-	else
+	} else {
 		retval = piix4_setup(dev, id);
+	}
 
 	/* If no main SMBus found, give up */
 	if (retval < 0)
@@ -692,6 +698,9 @@ static void piix4_remove(struct pci_dev *dev)
 		piix4_adap_remove(piix4_aux_adapter, 1);
 		piix4_aux_adapter = NULL;
 	}
+
+	if (piix4_smb_idx_sb800)
+		release_region(piix4_smb_idx_sb800, 2);
 }
 
 static struct pci_driver piix4_driver = {
-- 
1.9.1

  parent reply	other threads:[~2015-11-01 16:32 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-11-01 16:32 [PATCH v2 0/5] Support multiplexed main SMBus interface on SB80 Christian Fetzer
2015-11-01 16:32 ` [PATCH v2 1/5] i2c-piix4: Optionally release smba in piix4_adap_remove Christian Fetzer
2015-11-02 10:46   ` Mika Westerberg
2015-11-01 16:32 ` [PATCH v2 2/5] i2c-piix4: Convert piix4_main_adapter to array Christian Fetzer
2015-11-02 10:47   ` Mika Westerberg
2015-11-02 11:55   ` Andy Shevchenko
2015-11-01 16:32 ` Christian Fetzer [this message]
2015-11-02 10:53   ` [PATCH v2 3/5] i2c-piix4: Request base address index region once for SB800 Mika Westerberg
2015-11-02 12:02   ` Andy Shevchenko
2015-11-01 16:32 ` [PATCH v2 4/5] i2c-piix4: Add support for multiplexed main adapter in SB800 Christian Fetzer
2015-11-02 10:59   ` Mika Westerberg
2015-11-02 12:09   ` Andy Shevchenko
2015-11-01 16:32 ` [PATCH v2 5/5] i2c-piix4: Add adapter port name support for SB800 chipset Christian Fetzer
2015-11-02 11:03   ` Mika Westerberg
2015-11-02 12:12   ` Andy Shevchenko

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1446395529-9987-4-git-send-email-fetzer.ch@gmail.com \
    --to=fetzer.ch@gmail.com \
    --cc=andriy.shevchenko@linux.intel.com \
    --cc=galandilias@gmail.com \
    --cc=jarkko.nikula@linux.intel.com \
    --cc=linux-i2c@vger.kernel.org \
    --cc=mika.westerberg@linux.intel.com \
    --cc=wsa@the-dreams.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).