linux-i2c.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Peter Rosin <peda@lysator.liu.se>
To: linux-kernel@vger.kernel.org
Cc: Peter Rosin <peda@axentia.se>, Wolfram Sang <wsa@the-dreams.de>,
	Jonathan Corbet <corbet@lwn.net>,
	Peter Korsgaard <peter.korsgaard@barco.com>,
	Guenter Roeck <linux@roeck-us.net>,
	Jonathan Cameron <jic23@kernel.org>,
	Hartmut Knaack <knaack.h@gmx.de>,
	Lars-Peter Clausen <lars@metafoo.de>,
	Peter Meerwald <pmeerw@pmeerw.net>,
	Antti Palosaari <crope@iki.fi>,
	Mauro Carvalho Chehab <mchehab@osg.samsung.com>,
	Rob Herring <robh+dt@kernel.org>,
	Frank Rowand <frowand.list@gmail.com>,
	Grant Likely <grant.likely@linaro.org>,
	Andrew Morton <akpm@linux-foundation.org>,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	"David S. Miller" <davem@davemloft.net>,
	Kalle Valo <kvalo@codeaurora.org>, Joe Perches <joe@perches.com>,
	Jiri Slaby <jslaby@suse.com>,
	Daniel Baluta <daniel.baluta@intel.com>,
	Adriana Reus <adriana.reus@intel.com>,
	Lucas De Marchi <lucas.demarchi@intel.com>,
	Mat
Subject: [PATCH v6 18/24] i2c-mux: relax locking of the top i2c adapter during mux-locked muxing
Date: Sun,  3 Apr 2016 10:52:48 +0200	[thread overview]
Message-ID: <1459673574-11440-19-git-send-email-peda@lysator.liu.se> (raw)
In-Reply-To: <1459673574-11440-1-git-send-email-peda@lysator.liu.se>

From: Peter Rosin <peda@axentia.se>

With a i2c topology like the following

                       GPIO ---|  ------ BAT1
                        |      v /
   I2C  -----+----------+---- MUX
             |                   \
           EEPROM                 ------ BAT2

there is a locking problem with the GPIO controller since it is a client
on the same i2c bus that it muxes. Transfers to the mux clients (e.g. BAT1)
will lock the whole i2c bus prior to attempting to switch the mux to the
correct i2c segment. In the above case, the GPIO device is an I/O expander
with an i2c interface, and since the GPIO subsystem knows nothing (and
rightfully so) about the lockless needs of the i2c mux code, this results
in a deadlock when the GPIO driver issues i2c transfers to modify the
mux.

So, observing that while it is needed to have the i2c bus locked during the
actual MUX update in order to avoid random garbage on the slave side, it
is not strictly a must to have it locked over the whole sequence of a full
select-transfer-deselect mux client operation. The mux itself needs to be
locked, so transfers to clients behind the mux are serialized, and the mux
needs to be stable during all i2c traffic (otherwise individual mux slave
segments might see garbage, or worse).

Introduce this new locking concept as "mux-locked" muxes, and call the
pre-existing mux locking scheme "parent-locked".

Modify the i2c mux locking so that muxes that are "mux-locked" locks only
the muxes on the parent adapter instead of the whole i2c bus when there is
a transfer to the slave side of the mux. This lock serializes transfers to
the slave side of the muxes on the parent adapter.

Add code to i2c-mux-gpio and i2c-mux-pinctrl that checks if all involved
gpio/pinctrl devices have a parent that is an i2c adapter in the same
adapter tree that is muxed, and request a "mux-locked mux" if that is the
case.

Modify the select-transfer-deselect code for "mux-locked" muxes so
that each of the select-transfer-deselect ops locks the mux parent
adapter individually.

Signed-off-by: Peter Rosin <peda@axentia.se>
---
 drivers/i2c/i2c-core.c              |   1 +
 drivers/i2c/i2c-mux.c               | 152 +++++++++++++++++++++++++++++++++---
 drivers/i2c/muxes/i2c-mux-gpio.c    |  18 +++++
 drivers/i2c/muxes/i2c-mux-pinctrl.c |  38 +++++++++
 include/linux/i2c-mux.h             |   6 ++
 include/linux/i2c.h                 |   1 +
 6 files changed, 203 insertions(+), 13 deletions(-)

diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c
index 5314434c2b5d..53514ea314cd 100644
--- a/drivers/i2c/i2c-core.c
+++ b/drivers/i2c/i2c-core.c
@@ -1543,6 +1543,7 @@ static int i2c_register_adapter(struct i2c_adapter *adap)
 	}
 
 	rt_mutex_init(&adap->bus_lock);
+	rt_mutex_init(&adap->mux_lock);
 	mutex_init(&adap->userspace_clients_lock);
 	INIT_LIST_HEAD(&adap->userspace_clients);
 
diff --git a/drivers/i2c/i2c-mux.c b/drivers/i2c/i2c-mux.c
index e1b2bb112efd..698b25816b65 100644
--- a/drivers/i2c/i2c-mux.c
+++ b/drivers/i2c/i2c-mux.c
@@ -35,6 +35,25 @@ struct i2c_mux_priv {
 	u32 chan_id;
 };
 
+static int __i2c_mux_master_xfer(struct i2c_adapter *adap,
+				 struct i2c_msg msgs[], int num)
+{
+	struct i2c_mux_priv *priv = adap->algo_data;
+	struct i2c_mux_core *muxc = priv->muxc;
+	struct i2c_adapter *parent = muxc->parent;
+	int ret;
+
+	/* Switch to the right mux port and perform the transfer. */
+
+	ret = muxc->select(muxc, priv->chan_id);
+	if (ret >= 0)
+		ret = __i2c_transfer(parent, msgs, num);
+	if (muxc->deselect)
+		muxc->deselect(muxc, priv->chan_id);
+
+	return ret;
+}
+
 static int i2c_mux_master_xfer(struct i2c_adapter *adap,
 			       struct i2c_msg msgs[], int num)
 {
@@ -47,7 +66,29 @@ static int i2c_mux_master_xfer(struct i2c_adapter *adap,
 
 	ret = muxc->select(muxc, priv->chan_id);
 	if (ret >= 0)
-		ret = __i2c_transfer(parent, msgs, num);
+		ret = i2c_transfer(parent, msgs, num);
+	if (muxc->deselect)
+		muxc->deselect(muxc, priv->chan_id);
+
+	return ret;
+}
+
+static int __i2c_mux_smbus_xfer(struct i2c_adapter *adap,
+				u16 addr, unsigned short flags,
+				char read_write, u8 command,
+				int size, union i2c_smbus_data *data)
+{
+	struct i2c_mux_priv *priv = adap->algo_data;
+	struct i2c_mux_core *muxc = priv->muxc;
+	struct i2c_adapter *parent = muxc->parent;
+	int ret;
+
+	/* Select the right mux port and perform the transfer. */
+
+	ret = muxc->select(muxc, priv->chan_id);
+	if (ret >= 0)
+		ret = parent->algo->smbus_xfer(parent, addr, flags,
+					read_write, command, size, data);
 	if (muxc->deselect)
 		muxc->deselect(muxc, priv->chan_id);
 
@@ -68,8 +109,8 @@ static int i2c_mux_smbus_xfer(struct i2c_adapter *adap,
 
 	ret = muxc->select(muxc, priv->chan_id);
 	if (ret >= 0)
-		ret = parent->algo->smbus_xfer(parent, addr, flags,
-					read_write, command, size, data);
+		ret = i2c_smbus_xfer(parent, addr, flags,
+				     read_write, command, size, data);
 	if (muxc->deselect)
 		muxc->deselect(muxc, priv->chan_id);
 
@@ -98,12 +139,49 @@ static unsigned int i2c_mux_parent_classes(struct i2c_adapter *parent)
 	return class;
 }
 
+static void i2c_mux_lock_bus(struct i2c_adapter *adapter, int flags)
+{
+	struct i2c_mux_priv *priv = adapter->algo_data;
+	struct i2c_adapter *parent = priv->muxc->parent;
+
+	rt_mutex_lock(&parent->mux_lock);
+	if (!(flags & I2C_LOCK_ADAPTER))
+		return;
+	i2c_lock_bus(parent, flags);
+}
+
+static int i2c_mux_trylock_bus(struct i2c_adapter *adapter, int flags)
+{
+	struct i2c_mux_priv *priv = adapter->algo_data;
+	struct i2c_adapter *parent = priv->muxc->parent;
+
+	if (!rt_mutex_trylock(&parent->mux_lock))
+		return 0;
+	if (!(flags & I2C_LOCK_ADAPTER))
+		return 1;
+	if (parent->trylock_bus(parent, flags))
+		return 1;
+	rt_mutex_unlock(&parent->mux_lock);
+	return 0;
+}
+
+static void i2c_mux_unlock_bus(struct i2c_adapter *adapter, int flags)
+{
+	struct i2c_mux_priv *priv = adapter->algo_data;
+	struct i2c_adapter *parent = priv->muxc->parent;
+
+	if (flags & I2C_LOCK_ADAPTER)
+		i2c_unlock_bus(parent, flags);
+	rt_mutex_unlock(&parent->mux_lock);
+}
+
 static void i2c_parent_lock_bus(struct i2c_adapter *adapter, int flags)
 {
 	struct i2c_mux_priv *priv = adapter->algo_data;
 	struct i2c_adapter *parent = priv->muxc->parent;
 
-	parent->lock_bus(parent, flags);
+	rt_mutex_lock(&parent->mux_lock);
+	i2c_lock_bus(parent, flags);
 }
 
 static int i2c_parent_trylock_bus(struct i2c_adapter *adapter, int flags)
@@ -111,7 +189,12 @@ static int i2c_parent_trylock_bus(struct i2c_adapter *adapter, int flags)
 	struct i2c_mux_priv *priv = adapter->algo_data;
 	struct i2c_adapter *parent = priv->muxc->parent;
 
-	return parent->trylock_bus(parent, flags);
+	if (!rt_mutex_trylock(&parent->mux_lock))
+		return 0;
+	if (parent->trylock_bus(parent, flags))
+		return 1;
+	rt_mutex_unlock(&parent->mux_lock);
+	return 0;
 }
 
 static void i2c_parent_unlock_bus(struct i2c_adapter *adapter, int flags)
@@ -119,8 +202,35 @@ static void i2c_parent_unlock_bus(struct i2c_adapter *adapter, int flags)
 	struct i2c_mux_priv *priv = adapter->algo_data;
 	struct i2c_adapter *parent = priv->muxc->parent;
 
-	parent->unlock_bus(parent, flags);
+	i2c_unlock_bus(parent, flags);
+	rt_mutex_unlock(&parent->mux_lock);
+}
+
+struct i2c_adapter *i2c_root_adapter(struct device *dev)
+{
+	struct device *i2c;
+	struct i2c_adapter *i2c_root;
+
+	/*
+	 * Walk up the device tree to find an i2c adapter, indicating
+	 * that this is an i2c client device. Check all ancestors to
+	 * handle mfd devices etc.
+	 */
+	for (i2c = dev; i2c; i2c = i2c->parent) {
+		if (i2c->type == &i2c_adapter_type)
+			break;
+	}
+	if (!i2c)
+		return NULL;
+
+	/* Continue up the tree to find the root i2c adapter */
+	i2c_root = to_i2c_adapter(i2c);
+	while (i2c_parent_is_i2c_adapter(i2c_root))
+		i2c_root = i2c_parent_is_i2c_adapter(i2c_root);
+
+	return i2c_root;
 }
+EXPORT_SYMBOL_GPL(i2c_root_adapter);
 
 int i2c_mux_reserve_adapters(struct i2c_mux_core *muxc, int adapters)
 {
@@ -163,6 +273,8 @@ struct i2c_mux_core *i2c_mux_alloc(struct i2c_adapter *parent,
 
 	muxc->parent = parent;
 	muxc->dev = dev;
+	if (flags & I2C_MUX_LOCKED)
+		muxc->mux_locked = 1;
 	muxc->select = select;
 	muxc->deselect = deselect;
 
@@ -200,10 +312,18 @@ int i2c_mux_add_adapter(struct i2c_mux_core *muxc,
 	/* Need to do algo dynamically because we don't know ahead
 	 * of time what sort of physical adapter we'll be dealing with.
 	 */
-	if (parent->algo->master_xfer)
-		priv->algo.master_xfer = i2c_mux_master_xfer;
-	if (parent->algo->smbus_xfer)
-		priv->algo.smbus_xfer = i2c_mux_smbus_xfer;
+	if (parent->algo->master_xfer) {
+		if (muxc->mux_locked)
+			priv->algo.master_xfer = i2c_mux_master_xfer;
+		else
+			priv->algo.master_xfer = __i2c_mux_master_xfer;
+	}
+	if (parent->algo->smbus_xfer) {
+		if (muxc->mux_locked)
+			priv->algo.smbus_xfer = i2c_mux_smbus_xfer;
+		else
+			priv->algo.smbus_xfer = __i2c_mux_smbus_xfer;
+	}
 	priv->algo.functionality = i2c_mux_functionality;
 
 	/* Now fill out new adapter structure */
@@ -216,9 +336,15 @@ int i2c_mux_add_adapter(struct i2c_mux_core *muxc,
 	priv->adap.retries = parent->retries;
 	priv->adap.timeout = parent->timeout;
 	priv->adap.quirks = parent->quirks;
-	priv->adap.lock_bus = i2c_parent_lock_bus;
-	priv->adap.trylock_bus = i2c_parent_trylock_bus;
-	priv->adap.unlock_bus = i2c_parent_unlock_bus;
+	if (muxc->mux_locked) {
+		priv->adap.lock_bus = i2c_mux_lock_bus;
+		priv->adap.trylock_bus = i2c_mux_trylock_bus;
+		priv->adap.unlock_bus = i2c_mux_unlock_bus;
+	} else {
+		priv->adap.lock_bus = i2c_parent_lock_bus;
+		priv->adap.trylock_bus = i2c_parent_trylock_bus;
+		priv->adap.unlock_bus = i2c_parent_unlock_bus;
+	}
 
 	/* Sanity check on class */
 	if (i2c_mux_parent_classes(parent) & class)
diff --git a/drivers/i2c/muxes/i2c-mux-gpio.c b/drivers/i2c/muxes/i2c-mux-gpio.c
index 1bcc26737359..e382c03e3020 100644
--- a/drivers/i2c/muxes/i2c-mux-gpio.c
+++ b/drivers/i2c/muxes/i2c-mux-gpio.c
@@ -15,6 +15,7 @@
 #include <linux/module.h>
 #include <linux/slab.h>
 #include <linux/gpio.h>
+#include "../../gpio/gpiolib.h"
 #include <linux/of_gpio.h>
 
 struct gpiomux {
@@ -137,6 +138,7 @@ static int i2c_mux_gpio_probe(struct platform_device *pdev)
 	struct i2c_mux_core *muxc;
 	struct gpiomux *mux;
 	struct i2c_adapter *parent;
+	struct i2c_adapter *root;
 	unsigned initial_state, gpio_base;
 	int i, ret;
 
@@ -178,6 +180,9 @@ static int i2c_mux_gpio_probe(struct platform_device *pdev)
 	if (!parent)
 		return -EPROBE_DEFER;
 
+	root = i2c_root_adapter(&parent->dev);
+
+	muxc->mux_locked = true;
 	muxc->parent = parent;
 	mux->gpio_base = gpio_base;
 
@@ -193,6 +198,9 @@ static int i2c_mux_gpio_probe(struct platform_device *pdev)
 	}
 
 	for (i = 0; i < mux->data.n_gpios; i++) {
+		struct device *gpio_dev;
+		struct gpio_desc *gpio_desc;
+
 		ret = gpio_request(gpio_base + mux->data.gpios[i], "i2c-mux-gpio");
 		if (ret) {
 			dev_err(&pdev->dev, "Failed to request GPIO %d\n",
@@ -209,8 +217,18 @@ static int i2c_mux_gpio_probe(struct platform_device *pdev)
 			i++;	/* gpio_request above succeeded, so must free */
 			goto err_request_gpio;
 		}
+
+		if (!muxc->mux_locked)
+			continue;
+
+		gpio_desc = gpio_to_desc(gpio_base + mux->data.gpios[i]);
+		gpio_dev = &gpio_desc->gdev->dev;
+		muxc->mux_locked = i2c_root_adapter(gpio_dev) == root;
 	}
 
+	if (muxc->mux_locked)
+		dev_info(&pdev->dev, "mux-locked i2c mux\n");
+
 	for (i = 0; i < mux->data.n_values; i++) {
 		u32 nr = mux->data.base_nr ? (mux->data.base_nr + i) : 0;
 		unsigned int class = mux->data.classes ? mux->data.classes[i] : 0;
diff --git a/drivers/i2c/muxes/i2c-mux-pinctrl.c b/drivers/i2c/muxes/i2c-mux-pinctrl.c
index bbfabf4f52be..017c3af7d401 100644
--- a/drivers/i2c/muxes/i2c-mux-pinctrl.c
+++ b/drivers/i2c/muxes/i2c-mux-pinctrl.c
@@ -24,6 +24,7 @@
 #include <linux/platform_device.h>
 #include <linux/slab.h>
 #include <linux/of.h>
+#include "../../pinctrl/core.h"
 
 struct i2c_mux_pinctrl {
 	struct i2c_mux_pinctrl_platform_data *pdata;
@@ -120,10 +121,31 @@ static inline int i2c_mux_pinctrl_parse_dt(struct i2c_mux_pinctrl *mux,
 }
 #endif
 
+static struct i2c_adapter *i2c_mux_pinctrl_root_adapter(
+	struct pinctrl_state *state)
+{
+	struct i2c_adapter *root = NULL;
+	struct pinctrl_setting *setting;
+	struct i2c_adapter *pin_root;
+
+	list_for_each_entry(setting, &state->settings, node) {
+		pin_root = i2c_root_adapter(setting->pctldev->dev);
+		if (!pin_root)
+			return NULL;
+		if (!root)
+			root = pin_root;
+		else if (root != pin_root)
+			return NULL;
+	}
+
+	return root;
+}
+
 static int i2c_mux_pinctrl_probe(struct platform_device *pdev)
 {
 	struct i2c_mux_core *muxc;
 	struct i2c_mux_pinctrl *mux;
+	struct i2c_adapter *root;
 	int i, ret;
 
 	muxc = i2c_mux_alloc(NULL, &pdev->dev, sizeof(*mux), 0,
@@ -199,6 +221,22 @@ static int i2c_mux_pinctrl_probe(struct platform_device *pdev)
 		goto err;
 	}
 
+	root = i2c_root_adapter(&muxc->parent->dev);
+
+	muxc->mux_locked = true;
+	for (i = 0; i < mux->pdata->bus_count; i++) {
+		if (root != i2c_mux_pinctrl_root_adapter(mux->states[i])) {
+			muxc->mux_locked = false;
+			break;
+		}
+	}
+	if (muxc->mux_locked && mux->pdata->pinctrl_state_idle
+	    && root != i2c_mux_pinctrl_root_adapter(mux->state_idle))
+		muxc->mux_locked = false;
+
+	if (muxc->mux_locked)
+		dev_info(&pdev->dev, "mux-locked i2c mux\n");
+
 	for (i = 0; i < mux->pdata->bus_count; i++) {
 		u32 bus = mux->pdata->base_bus_num ?
 				(mux->pdata->base_bus_num + i) : 0;
diff --git a/include/linux/i2c-mux.h b/include/linux/i2c-mux.h
index 25c88ccf9c38..d7a16bbe6c4a 100644
--- a/include/linux/i2c-mux.h
+++ b/include/linux/i2c-mux.h
@@ -33,6 +33,7 @@ struct i2c_mux_core {
 	int adapters;
 	int max_adapters;
 	struct device *dev;
+	bool mux_locked;
 
 	void *priv;
 
@@ -46,11 +47,16 @@ struct i2c_mux_core *i2c_mux_alloc(struct i2c_adapter *parent,
 				   int (*select)(struct i2c_mux_core *, u32),
 				   int (*deselect)(struct i2c_mux_core *, u32));
 
+/* flags for i2c_mux_alloc */
+#define I2C_MUX_LOCKED (1<<0)
+
 static inline void *i2c_mux_priv(struct i2c_mux_core *muxc)
 {
 	return muxc->priv;
 }
 
+struct i2c_adapter *i2c_root_adapter(struct device *dev);
+
 int i2c_mux_reserve_adapters(struct i2c_mux_core *muxc, int adapters);
 
 /*
diff --git a/include/linux/i2c.h b/include/linux/i2c.h
index c5f79fec1bfb..e682d41fa4a6 100644
--- a/include/linux/i2c.h
+++ b/include/linux/i2c.h
@@ -524,6 +524,7 @@ struct i2c_adapter {
 
 	/* data fields that are valid for all devices	*/
 	struct rt_mutex bus_lock;
+	struct rt_mutex mux_lock;
 
 	int timeout;			/* in jiffies */
 	int retries;
-- 
2.1.4

  parent reply	other threads:[~2016-04-03  8:52 UTC|newest]

Thread overview: 42+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-04-03  8:52 [PATCH v6 00/24] i2c mux cleanup and locking update Peter Rosin
2016-04-03  8:52 ` [PATCH v6 02/24] i2c: i2c-mux-gpio: convert to use an explicit i2c mux core Peter Rosin
2016-04-03  8:52 ` [PATCH v6 03/24] i2c: i2c-mux-pinctrl: " Peter Rosin
2016-04-03  8:52 ` [PATCH v6 04/24] i2c: i2c-arb-gpio-challenge: " Peter Rosin
2016-04-03  8:52 ` [PATCH v6 05/24] i2c: i2c-mux-pca9541: " Peter Rosin
2016-04-03  8:52 ` [PATCH v6 06/24] i2c: i2c-mux-pca954x: " Peter Rosin
2016-04-03  8:52 ` [PATCH v6 07/24] i2c: i2c-mux-reg: " Peter Rosin
2016-04-03  8:52 ` [PATCH v6 08/24] iio: imu: inv_mpu6050: " Peter Rosin
     [not found]   ` <1459673574-11440-9-git-send-email-peda-SamgB31n2u5IcsJQ0EH25Q@public.gmane.org>
2016-04-03 10:51     ` Jonathan Cameron
2016-04-03 11:51       ` Peter Rosin
     [not found]         ` <570103AE.1020707-SamgB31n2u5IcsJQ0EH25Q@public.gmane.org>
2016-04-10 14:12           ` Jonathan Cameron
2016-04-19 15:58   ` Crestez Dan Leonard
2016-04-19 16:37     ` Peter Rosin
2016-04-03  8:52 ` [PATCH v6 11/24] [media] rtl2832: " Peter Rosin
2016-04-03  8:52 ` [PATCH v6 12/24] [media] si2168: " Peter Rosin
2016-04-03  8:52 ` [PATCH v6 13/24] [media] cx231xx: " Peter Rosin
     [not found] ` <1459673574-11440-1-git-send-email-peda-SamgB31n2u5IcsJQ0EH25Q@public.gmane.org>
2016-04-03  8:52   ` [PATCH v6 01/24] i2c-mux: add common data for every i2c-mux instance Peter Rosin
2016-04-11 20:46     ` Wolfram Sang
2016-04-13 13:37       ` Peter Rosin
     [not found]         ` <570E4BAE.7060108-SamgB31n2u5IcsJQ0EH25Q@public.gmane.org>
2016-04-15 11:23           ` Wolfram Sang
2016-04-03  8:52   ` [PATCH v6 09/24] [media] m88ds3103: convert to use an explicit i2c mux core Peter Rosin
2016-04-03  8:52   ` [PATCH v6 10/24] [media] rtl2830: " Peter Rosin
2016-04-03  8:52   ` [PATCH v6 14/24] of/unittest: " Peter Rosin
2016-04-04  5:16     ` Rob Herring
2016-04-05  7:42       ` Peter Rosin
2016-04-11 12:39   ` [PATCH v6 00/24] i2c mux cleanup and locking update Wolfram Sang
2016-04-11 13:36     ` Peter Rosin
     [not found]       ` <570BA845.1060309-SamgB31n2u5IcsJQ0EH25Q@public.gmane.org>
2016-04-11 15:59         ` Wolfram Sang
2016-04-03  8:52 ` [PATCH v6 15/24] i2c-mux: drop old unused i2c-mux api Peter Rosin
2016-04-03  8:52 ` [PATCH v6 16/24] i2c: allow adapter drivers to override the adapter locking Peter Rosin
2016-04-03  8:52 ` [PATCH v6 17/24] i2c: muxes always lock the parent adapter Peter Rosin
2016-04-03  8:52 ` Peter Rosin [this message]
2016-04-03  8:52 ` [PATCH v6 19/24] i2c-mux: document i2c muxes and elaborate on parent-/mux-locked muxes Peter Rosin
2016-04-03 11:09   ` Jonathan Cameron
2016-04-05  7:50     ` Peter Rosin
2016-04-03  8:52 ` [PATCH v6 20/24] iio: imu: inv_mpu6050: change the i2c gate to be mux-locked Peter Rosin
2016-04-03 10:54   ` Jonathan Cameron
     [not found]     ` <5700F648.1010804-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
2016-04-18  7:37       ` Daniel Baluta
2016-04-03  8:52 ` [PATCH v6 21/24] [media] si2168: " Peter Rosin
2016-04-03  8:52 ` [PATCH v6 22/24] [media] rtl2832: " Peter Rosin
2016-04-03  8:52 ` [PATCH v6 23/24] [media] rtl2832_sdr: get rid of empty regmap wrappers Peter Rosin
2016-04-03  8:52 ` [PATCH v6 24/24] [media] rtl2832: regmap is aware of lockdep, drop local locking hack Peter Rosin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1459673574-11440-19-git-send-email-peda@lysator.liu.se \
    --to=peda@lysator.liu.se \
    --cc=adriana.reus@intel.com \
    --cc=akpm@linux-foundation.org \
    --cc=corbet@lwn.net \
    --cc=crope@iki.fi \
    --cc=daniel.baluta@intel.com \
    --cc=davem@davemloft.net \
    --cc=frowand.list@gmail.com \
    --cc=grant.likely@linaro.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=jic23@kernel.org \
    --cc=joe@perches.com \
    --cc=jslaby@suse.com \
    --cc=knaack.h@gmx.de \
    --cc=kvalo@codeaurora.org \
    --cc=lars@metafoo.de \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux@roeck-us.net \
    --cc=lucas.demarchi@intel.com \
    --cc=mchehab@osg.samsung.com \
    --cc=peda@axentia.se \
    --cc=peter.korsgaard@barco.com \
    --cc=pmeerw@pmeerw.net \
    --cc=robh+dt@kernel.org \
    --cc=wsa@the-dreams.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).