linux-i2c.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
To: Jarkko Nikula <jarkko.nikula@linux.intel.com>,
	Mika Westerberg <mika.westerberg@linux.intel.com>,
	linux-i2c@vger.kernel.org, Wolfram Sang <wsa@the-dreams.de>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Subject: [PATCH v2 2/3] i2c: designware-pci: Introduce Merrifield support
Date: Wed, 15 Jun 2016 18:05:06 +0300	[thread overview]
Message-ID: <1466003107-19375-3-git-send-email-andriy.shevchenko@linux.intel.com> (raw)
In-Reply-To: <1466003107-19375-1-git-send-email-andriy.shevchenko@linux.intel.com>

This patch enables I2C controllers found on Intel Edison board.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
 drivers/i2c/busses/i2c-designware-pcidrv.c | 39 ++++++++++++++++++++++++++++++
 1 file changed, 39 insertions(+)

diff --git a/drivers/i2c/busses/i2c-designware-pcidrv.c b/drivers/i2c/busses/i2c-designware-pcidrv.c
index 586c8d8..a7aab10 100644
--- a/drivers/i2c/busses/i2c-designware-pcidrv.c
+++ b/drivers/i2c/busses/i2c-designware-pcidrv.c
@@ -42,6 +42,7 @@
 
 enum dw_pci_ctl_id_t {
 	medfield,
+	merrifield,
 	baytrail,
 	haswell,
 };
@@ -75,6 +76,14 @@ struct dw_pci_controller {
 					I2C_FUNC_SMBUS_WORD_DATA |	\
 					I2C_FUNC_SMBUS_I2C_BLOCK)
 
+/* Merrifield HCNT/LCNT/SDA hold time */
+static struct dw_scl_sda_cfg mrfld_config = {
+	.ss_hcnt = 0x2f8,
+	.fs_hcnt = 0x87,
+	.ss_lcnt = 0x37b,
+	.fs_lcnt = 0x10a,
+};
+
 /* BayTrail HCNT/LCNT/SDA hold time */
 static struct dw_scl_sda_cfg byt_config = {
 	.ss_hcnt = 0x200,
@@ -112,6 +121,25 @@ static int mfld_setup(struct pci_dev *pdev, struct dw_pci_controller *c)
 	return -ENODEV;
 }
 
+static int mrfld_setup(struct pci_dev *pdev, struct dw_pci_controller *c)
+{
+	/*
+	 * On Intel Merrifield the i2c busses are enumerated [1..7]. So, we add
+	 * 1 to shift the default range. Besides that the first PCI slot
+	 * provides 4 functions, that's why we have to add 0 to the head slot
+	 * and 4 to the tail one.
+	 */
+	switch (PCI_SLOT(pdev->devfn)) {
+	case 8:
+		c->bus_num = PCI_FUNC(pdev->devfn) + 0 + 1;
+		return 0;
+	case 9:
+		c->bus_num = PCI_FUNC(pdev->devfn) + 4 + 1;
+		return 0;
+	}
+	return -ENODEV;
+}
+
 static struct dw_pci_controller dw_pci_controllers[] = {
 	[medfield] = {
 		.bus_num = -1,
@@ -121,6 +149,14 @@ static struct dw_pci_controller dw_pci_controllers[] = {
 		.clk_khz      = 25000,
 		.setup = mfld_setup,
 	},
+	[merrifield] = {
+		.bus_num = -1,
+		.bus_cfg = INTEL_MID_STD_CFG | DW_IC_CON_SPEED_FAST,
+		.tx_fifo_depth = 64,
+		.rx_fifo_depth = 64,
+		.scl_sda_cfg = &mrfld_config,
+		.setup = mrfld_setup,
+	},
 	[baytrail] = {
 		.bus_num = -1,
 		.bus_cfg = INTEL_MID_STD_CFG | DW_IC_CON_SPEED_FAST,
@@ -269,6 +305,9 @@ static const struct pci_device_id i2_designware_pci_ids[] = {
 	{ PCI_VDEVICE(INTEL, 0x082C), medfield },
 	{ PCI_VDEVICE(INTEL, 0x082D), medfield },
 	{ PCI_VDEVICE(INTEL, 0x082E), medfield },
+	/* Merrifield */
+	{ PCI_VDEVICE(INTEL, 0x1195), merrifield },
+	{ PCI_VDEVICE(INTEL, 0x1196), merrifield },
 	/* Baytrail */
 	{ PCI_VDEVICE(INTEL, 0x0F41), baytrail },
 	{ PCI_VDEVICE(INTEL, 0x0F42), baytrail },
-- 
2.8.1

  parent reply	other threads:[~2016-06-15 15:07 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-06-15 15:05 [PATCH v2 0/3] i2c: designware-pci: refactor and add Merrifield support Andy Shevchenko
2016-06-15 15:05 ` [PATCH v2 1/3] i2c: designware-pci: Make bus number allocation robust Andy Shevchenko
2016-06-15 15:05 ` Andy Shevchenko [this message]
2016-06-15 15:05 ` [PATCH v2 3/3] i2c: designware-pci: Sort header block alphabetically Andy Shevchenko
2016-06-16  7:44 ` [PATCH v2 0/3] i2c: designware-pci: refactor and add Merrifield support Jarkko Nikula
2016-06-19 17:42 ` Wolfram Sang
2016-06-19 18:08   ` Andy Shevchenko
2016-06-19 18:17     ` Wolfram Sang

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1466003107-19375-3-git-send-email-andriy.shevchenko@linux.intel.com \
    --to=andriy.shevchenko@linux.intel.com \
    --cc=jarkko.nikula@linux.intel.com \
    --cc=linux-i2c@vger.kernel.org \
    --cc=mika.westerberg@linux.intel.com \
    --cc=wsa@the-dreams.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).