From mboxrd@z Thu Jan 1 00:00:00 1970 From: Jon Hunter Subject: [RFC PATCH 01/13] drm/tegra: Clean-up if probing DPAUX fails Date: Fri, 17 Jun 2016 13:03:35 +0100 Message-ID: <1466165027-17917-2-git-send-email-jonathanh@nvidia.com> References: <1466165027-17917-1-git-send-email-jonathanh@nvidia.com> Mime-Version: 1.0 Content-Type: text/plain Return-path: In-Reply-To: <1466165027-17917-1-git-send-email-jonathanh-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org> Sender: devicetree-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: Thierry Reding , David Airlie , Stephen Warren , Alexandre Courbot , Wolfram Sang , Linus Walleij , Rob Herring , Mark Rutland Cc: dri-devel-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org, linux-tegra-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-i2c-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-gpio-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, Jon Hunter List-Id: linux-i2c@vger.kernel.org If the probing of the DPAUX fails, then clocks are left enabled and the DPAUX reset de-asserted. Add code to perform the necessary clean-up on probe failure by disabling clocks and asserting the reset. Signed-off-by: Jon Hunter --- drivers/gpu/drm/tegra/dpaux.c | 22 ++++++++++++++++------ 1 file changed, 16 insertions(+), 6 deletions(-) diff --git a/drivers/gpu/drm/tegra/dpaux.c b/drivers/gpu/drm/tegra/dpaux.c index b24a0f14821a..0874a7e5b37b 100644 --- a/drivers/gpu/drm/tegra/dpaux.c +++ b/drivers/gpu/drm/tegra/dpaux.c @@ -321,28 +321,30 @@ static int tegra_dpaux_probe(struct platform_device *pdev) if (IS_ERR(dpaux->clk_parent)) { dev_err(&pdev->dev, "failed to get parent clock: %ld\n", PTR_ERR(dpaux->clk_parent)); - return PTR_ERR(dpaux->clk_parent); + err = PTR_ERR(dpaux->clk_parent); + goto assert_reset; } err = clk_prepare_enable(dpaux->clk_parent); if (err < 0) { dev_err(&pdev->dev, "failed to enable parent clock: %d\n", err); - return err; + goto assert_reset; } err = clk_set_rate(dpaux->clk_parent, 270000000); if (err < 0) { dev_err(&pdev->dev, "failed to set clock to 270 MHz: %d\n", err); - return err; + goto disable_parent_clk; } dpaux->vdd = devm_regulator_get(&pdev->dev, "vdd"); if (IS_ERR(dpaux->vdd)) { dev_err(&pdev->dev, "failed to get VDD supply: %ld\n", PTR_ERR(dpaux->vdd)); - return PTR_ERR(dpaux->vdd); + err = PTR_ERR(dpaux->vdd); + goto disable_parent_clk; } err = devm_request_irq(dpaux->dev, dpaux->irq, tegra_dpaux_irq, 0, @@ -350,7 +352,7 @@ static int tegra_dpaux_probe(struct platform_device *pdev) if (err < 0) { dev_err(dpaux->dev, "failed to request IRQ#%u: %d\n", dpaux->irq, err); - return err; + goto disable_parent_clk; } disable_irq(dpaux->irq); @@ -360,7 +362,7 @@ static int tegra_dpaux_probe(struct platform_device *pdev) err = drm_dp_aux_register(&dpaux->aux); if (err < 0) - return err; + goto disable_parent_clk; /* * Assume that by default the DPAUX/I2C pads will be used for HDMI, @@ -393,6 +395,14 @@ static int tegra_dpaux_probe(struct platform_device *pdev) platform_set_drvdata(pdev, dpaux); return 0; + +disable_parent_clk: + clk_disable_unprepare(dpaux->clk_parent); +assert_reset: + reset_control_assert(dpaux->rst); + clk_disable_unprepare(dpaux->clk); + + return err; } static int tegra_dpaux_remove(struct platform_device *pdev) -- 2.1.4 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html