From mboxrd@z Thu Jan 1 00:00:00 1970 From: Benjamin Tissoires Subject: [PATCH v3 00/10] i2c: Host Notify / i801 fixes Date: Wed, 28 Sep 2016 10:15:39 +0200 Message-ID: <1475050549-25542-1-git-send-email-benjamin.tissoires@redhat.com> Return-path: Received: from mx1.redhat.com ([209.132.183.28]:38596 "EHLO mx1.redhat.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751146AbcI1IPy (ORCPT ); Wed, 28 Sep 2016 04:15:54 -0400 Sender: linux-i2c-owner@vger.kernel.org List-Id: linux-i2c@vger.kernel.org To: Jean Delvare , Wolfram Sang Cc: linux-i2c@vger.kernel.org, linux-kernel@vger.kernel.org Hi, this is mostly a resend of the series. The only change is in patch 9/10, where I removed the dev_warn that could be an issue on some laggish operations on Synaptics RMI4 devices (when retrieving the heatmap). It also appeared that these warning were sent quite regularly with the Elantech touchpads, so let's just disable those given that they are mostly harmless. Cheers, Benjamin Benjamin Tissoires (10): i2c: i2c-smbus: prevent races on remove when Host Notify is used i2c: i801: store and restore the SLVCMD register at load and unload i2c: i801: minor formatting issues i2c: i801: use BIT() macro for bits definition i2c: i801: use the BIT() macro for FEATURES_* also i2c: i801: do not report an error if FEATURE_HOST_NOTIFY is not set i2c: i2c-smbus: remove double warning message i2c: i2c-smbus: fix return value of i2c_handle_smbus_host_notify() i2c: i801: check if Host Notify is available during interrupt i2c: i801: remove SMBNTFDDAT reads as they always seem to return 0 drivers/i2c/busses/i2c-i801.c | 123 +++++++++++++++++++++++++----------------- drivers/i2c/i2c-smbus.c | 25 ++++++++- include/linux/i2c-smbus.h | 1 + 3 files changed, 99 insertions(+), 50 deletions(-) -- 2.7.4