From: Pantelis Antoniou <pantelis.antoniou@konsulko.com>
To: Lee Jones <lee.jones@linaro.org>
Cc: Linus Walleij <linus.walleij@linaro.org>,
Alexandre Courbot <gnurou@gmail.com>,
Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
Frank Rowand <frowand.list@gmail.com>,
Wolfram Sang <wsa@the-dreams.de>,
Richard Purdie <rpurdie@rpsys.net>,
Jacek Anaszewski <j.anaszewski@samsung.com>,
Jean Delvare <jdelvare@suse.com>, Peter Rosin <peda@axentia.se>,
Avirup Banerjee <abanerjee@juniper.net>,
Georgi Vlaev <gvlaev@juniper.net>,
Guenter Roeck <linux@roeck-us.net>,
JawaharBalaji Thirumalaisamy <jawaharb@juniper.net>,
Pantelis Antoniou <pantelis.antoniou@konsulko.com>,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-gpio@vger.kernel.org, linux-i2c@vger.kernel.org,
linux-leds@vger.kernel.org, linux-hwmon@vger.kernel.org
Subject: [PATCH 00/10] Introduce Juniper I2CS FPGA driver
Date: Fri, 7 Oct 2016 18:20:59 +0300 [thread overview]
Message-ID: <1475853669-22480-1-git-send-email-pantelis.antoniou@konsulko.com> (raw)
Add Juniper's I2CS FPGA driver. Those FPGAs
are present in Juniper's PTX series of routers.
The MFD driver provices i2c/gpio/leds/hwmon devices.
There are full device tree binding documents for the
master mfd driver and for all slave drivers.
This patchset is against mainline as of today: v4.8-9431-g3477d16
and is dependent on the "Juniper prerequisites" and
"Juniper infrastructure" patchsets sent earlier.
Avirup Banerjee (1):
hwmon: Add driver for Fan Tray on Juniper I2CS FGPA
Georgi Vlaev (8):
mfd: Add Juniper I2CS MFD driver
mfd: dt-bindings: Add bindings for the Juniper I2CS MFD
i2c/muxes: Juniper I2CS RE mux
i2c: i2c-mux-i2cs: Add device tree bindings
gpio: gpio-i2cs: Document bindings of I2CS FPGA GPIO block
leds: i2cs: Add I2CS FPGA leds driver
leds: Add binding for Juniper's I2CS FPGA
hwmon: i2cs-fan: Add hwmon dts binding documentation
Guenter Roeck (1):
gpio: i2cs: Juniper I2CS to GPIO pin mapping driver
.../devicetree/bindings/gpio/jnx,gpio-i2cs.txt | 43 ++
.../devicetree/bindings/hwmon/i2cs-fan.txt | 19 +
.../devicetree/bindings/i2c/jnx,i2c-mux-i2cs.txt | 27 ++
.../devicetree/bindings/leds/leds-i2cs.txt | 34 ++
Documentation/devicetree/bindings/mfd/jnx-i2cs.txt | 68 +++
drivers/gpio/Kconfig | 11 +
drivers/gpio/Makefile | 1 +
drivers/gpio/gpio-jnx-i2cs.c | 523 +++++++++++++++++++++
drivers/hwmon/Kconfig | 11 +
drivers/hwmon/Makefile | 1 +
drivers/hwmon/jnx-fan.c | 471 +++++++++++++++++++
drivers/i2c/muxes/Kconfig | 10 +
drivers/i2c/muxes/Makefile | 1 +
drivers/i2c/muxes/i2c-mux-i2cs.c | 155 ++++++
drivers/leds/Kconfig | 9 +
drivers/leds/Makefile | 1 +
drivers/leds/leds-jnx-i2cs.c | 219 +++++++++
drivers/mfd/Kconfig | 17 +
drivers/mfd/Makefile | 1 +
drivers/mfd/jnx-i2cs-core.c | 118 +++++
include/linux/mfd/jnx-i2cs-core.h | 96 ++++
include/linux/platform_data/jnx-i2cs-fan.h | 13 +
22 files changed, 1849 insertions(+)
create mode 100644 Documentation/devicetree/bindings/gpio/jnx,gpio-i2cs.txt
create mode 100644 Documentation/devicetree/bindings/hwmon/i2cs-fan.txt
create mode 100644 Documentation/devicetree/bindings/i2c/jnx,i2c-mux-i2cs.txt
create mode 100644 Documentation/devicetree/bindings/leds/leds-i2cs.txt
create mode 100644 Documentation/devicetree/bindings/mfd/jnx-i2cs.txt
create mode 100644 drivers/gpio/gpio-jnx-i2cs.c
create mode 100644 drivers/hwmon/jnx-fan.c
create mode 100644 drivers/i2c/muxes/i2c-mux-i2cs.c
create mode 100644 drivers/leds/leds-jnx-i2cs.c
create mode 100644 drivers/mfd/jnx-i2cs-core.c
create mode 100644 include/linux/mfd/jnx-i2cs-core.h
create mode 100644 include/linux/platform_data/jnx-i2cs-fan.h
--
1.9.1
next reply other threads:[~2016-10-07 15:23 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-10-07 15:20 Pantelis Antoniou [this message]
2016-10-07 15:21 ` [PATCH 02/10] mfd: dt-bindings: Add bindings for the Juniper I2CS MFD Pantelis Antoniou
2016-10-10 20:23 ` Rob Herring
2016-10-17 19:10 ` Pantelis Antoniou
[not found] ` <1475853669-22480-1-git-send-email-pantelis.antoniou-OWPKS81ov/FWk0Htik3J/w@public.gmane.org>
2016-10-07 15:21 ` [PATCH 01/10] mfd: Add Juniper I2CS MFD driver Pantelis Antoniou
2016-10-07 15:21 ` [PATCH 03/10] i2c/muxes: Juniper I2CS RE mux Pantelis Antoniou
2016-10-10 15:29 ` Peter Rosin
2016-10-07 15:21 ` [PATCH 08/10] leds: Add binding for Juniper's I2CS FPGA Pantelis Antoniou
2016-10-10 9:41 ` Jacek Anaszewski
2016-10-07 15:21 ` [PATCH 04/10] i2c: i2c-mux-i2cs: Add device tree bindings Pantelis Antoniou
2016-10-10 15:48 ` Peter Rosin
2016-10-17 19:11 ` Pantelis Antoniou
2016-10-10 20:25 ` Rob Herring
2016-10-07 15:21 ` [PATCH 05/10] gpio: i2cs: Juniper I2CS to GPIO pin mapping driver Pantelis Antoniou
2016-10-21 8:41 ` Linus Walleij
2016-10-07 15:21 ` [PATCH 06/10] gpio: gpio-i2cs: Document bindings of I2CS FPGA GPIO block Pantelis Antoniou
2016-10-21 8:59 ` Linus Walleij
2016-10-07 15:21 ` [PATCH 07/10] leds: i2cs: Add I2CS FPGA leds driver Pantelis Antoniou
2016-10-10 9:41 ` Jacek Anaszewski
2016-10-07 15:21 ` [PATCH 09/10] hwmon: Add driver for Fan Tray on Juniper I2CS FGPA Pantelis Antoniou
2016-10-07 15:21 ` [PATCH 10/10] hwmon: i2cs-fan: Add hwmon dts binding documentation Pantelis Antoniou
2016-10-10 20:29 ` Rob Herring
2016-10-17 19:12 ` Pantelis Antoniou
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1475853669-22480-1-git-send-email-pantelis.antoniou@konsulko.com \
--to=pantelis.antoniou@konsulko.com \
--cc=abanerjee@juniper.net \
--cc=devicetree@vger.kernel.org \
--cc=frowand.list@gmail.com \
--cc=gnurou@gmail.com \
--cc=gvlaev@juniper.net \
--cc=j.anaszewski@samsung.com \
--cc=jawaharb@juniper.net \
--cc=jdelvare@suse.com \
--cc=lee.jones@linaro.org \
--cc=linus.walleij@linaro.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-hwmon@vger.kernel.org \
--cc=linux-i2c@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-leds@vger.kernel.org \
--cc=linux@roeck-us.net \
--cc=mark.rutland@arm.com \
--cc=peda@axentia.se \
--cc=robh+dt@kernel.org \
--cc=rpurdie@rpsys.net \
--cc=wsa@the-dreams.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).