linux-i2c.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Hoan Tran <hotran@apm.com>
To: Wolfram Sang <wsa@the-dreams.de>
Cc: linux-i2c@vger.kernel.org, linux-kernel@vger.kernel.org,
	Loc Ho <lho@apm.com>, Keyur Chudgar <kchudgar@apm.com>,
	Hoan Tran <hotran@apm.com>
Subject: [PATCH 2/2] i2c: xgene-slimpro: Add ACPI support by using PCC mailbox
Date: Tue, 28 Mar 2017 13:46:17 -0700	[thread overview]
Message-ID: <1490733977-23760-3-git-send-email-hotran@apm.com> (raw)
In-Reply-To: <1490733977-23760-1-git-send-email-hotran@apm.com>

This patch adds ACPI support by using PCC mailbox communication
interface.

Signed-off-by: Hoan Tran <hotran@apm.com>
---
 drivers/i2c/busses/i2c-xgene-slimpro.c | 179 ++++++++++++++++++++++++++++++---
 1 file changed, 166 insertions(+), 13 deletions(-)

diff --git a/drivers/i2c/busses/i2c-xgene-slimpro.c b/drivers/i2c/busses/i2c-xgene-slimpro.c
index 96545aa..a5771c1 100644
--- a/drivers/i2c/busses/i2c-xgene-slimpro.c
+++ b/drivers/i2c/busses/i2c-xgene-slimpro.c
@@ -32,6 +32,8 @@
 #include <linux/platform_device.h>
 #include <linux/version.h>
 
+#include <acpi/pcc.h>
+
 #define MAILBOX_OP_TIMEOUT		1000	/* Operation time out in ms */
 #define MAILBOX_I2C_INDEX		0
 #define SLIMPRO_IIC_BUS			1	/* Use I2C bus 1 only */
@@ -89,6 +91,8 @@
 	((addrlen << SLIMPRO_IIC_ADDRLEN_SHIFT) & SLIMPRO_IIC_ADDRLEN_MASK) | \
 	((datalen << SLIMPRO_IIC_DATALEN_SHIFT) & SLIMPRO_IIC_DATALEN_MASK))
 
+#define SLIMPRO_MSG_TYPE(v)             (((v) & 0xF0000000) >> 28)
+
 /*
  * Encode for upper address for block data
  */
@@ -99,19 +103,48 @@
 								& 0x3FF00000))
 #define SLIMPRO_IIC_ENCODE_ADDR(a)			((a) & 0x000FFFFF)
 
+#define SLIMPRO_IIC_MSG_DWORD_COUNT			3
+
+/* PCC related defines */
+#define PCC_SIGNATURE			0x50424300
+#define PCC_CMD_GENERATE_DB_INT		BIT(15)
+#define PCC_STS_CMD_COMPLETE		BIT(0)
+#define PCC_STS_SCI_DOORBELL		BIT(1)
+#define PCC_STS_ERR			BIT(2)
+#define PCC_STS_PLAT_NOTIFY		BIT(3)
+
 struct slimpro_i2c_dev {
 	struct i2c_adapter adapter;
 	struct device *dev;
 	struct mbox_chan *mbox_chan;
 	struct mbox_client mbox_client;
+	int mbox_idx;
 	struct completion rd_complete;
 	u8 dma_buffer[I2C_SMBUS_BLOCK_MAX + 1]; /* dma_buffer[0] is used for length */
 	u32 *resp_msg;
+	struct mutex tx_mutex;
+	phys_addr_t comm_base_addr;
+	void *pcc_comm_addr;
 };
 
 #define to_slimpro_i2c_dev(cl)	\
 		container_of(cl, struct slimpro_i2c_dev, mbox_client)
 
+/*
+ * This function tests and clears a bitmask then returns its old value
+ */
+static u16 xgene_word_tst_and_clr(u16 *addr, u16 mask)
+{
+	u16 ret, val;
+
+	val = le16_to_cpu(READ_ONCE(*addr));
+	ret = val & mask;
+	val &= ~mask;
+	WRITE_ONCE(*addr, cpu_to_le16(val));
+
+	return ret;
+}
+
 static void slimpro_i2c_rx_cb(struct mbox_client *cl, void *mssg)
 {
 	struct slimpro_i2c_dev *ctx = to_slimpro_i2c_dev(cl);
@@ -129,9 +162,53 @@ static void slimpro_i2c_rx_cb(struct mbox_client *cl, void *mssg)
 		complete(&ctx->rd_complete);
 }
 
+static void slimpro_i2c_pcc_rx_cb(struct mbox_client *cl, void *msg)
+{
+	struct slimpro_i2c_dev *ctx = to_slimpro_i2c_dev(cl);
+	struct acpi_pcct_shared_memory *generic_comm_base = ctx->pcc_comm_addr;
+
+	/* Check if platform sends interrupt */
+	if (!xgene_word_tst_and_clr(&generic_comm_base->status,
+				    PCC_STS_SCI_DOORBELL))
+		return;
+
+	if (xgene_word_tst_and_clr(&generic_comm_base->status,
+				   PCC_STS_CMD_COMPLETE)) {
+		msg = generic_comm_base + 1;
+
+		/* Response message msg[1] contains the return value. */
+		if (ctx->resp_msg)
+			*ctx->resp_msg = ((u32 *)msg)[1];
+
+		complete(&ctx->rd_complete);
+	}
+}
+
+static void slimpro_i2c_pcc_tx_prepare(struct slimpro_i2c_dev *ctx, u32 *msg)
+{
+	struct acpi_pcct_shared_memory *generic_comm_base = ctx->pcc_comm_addr;
+	u32 *ptr = (void *)(generic_comm_base + 1);
+	u16 status;
+	int i;
+
+	WRITE_ONCE(generic_comm_base->signature,
+		   cpu_to_le32(PCC_SIGNATURE | ctx->mbox_idx));
+
+	WRITE_ONCE(generic_comm_base->command,
+		   cpu_to_le16(SLIMPRO_MSG_TYPE(msg[0]) | PCC_CMD_GENERATE_DB_INT));
+
+	status = le16_to_cpu(READ_ONCE(generic_comm_base->status));
+	status &= ~PCC_STS_CMD_COMPLETE;
+	WRITE_ONCE(generic_comm_base->status, cpu_to_le16(status));
+
+	/* Copy the message to the PCC comm space */
+	for (i = 0; i < SLIMPRO_IIC_MSG_DWORD_COUNT; i++)
+		WRITE_ONCE(ptr[i], cpu_to_le32(msg[i]));
+}
+
 static int start_i2c_msg_xfer(struct slimpro_i2c_dev *ctx)
 {
-	if (ctx->mbox_client.tx_block) {
+	if (ctx->mbox_client.tx_block || !acpi_disabled) {
 		if (!wait_for_completion_timeout(&ctx->rd_complete,
 						 msecs_to_jiffies(MAILBOX_OP_TIMEOUT)))
 			return -ETIMEDOUT;
@@ -152,6 +229,12 @@ static int slimpro_i2c_send_msg(struct slimpro_i2c_dev *ctx,
 
 	ctx->resp_msg = data;
 
+	if (!acpi_disabled) {
+		mutex_lock(&ctx->tx_mutex);
+		init_completion(&ctx->rd_complete);
+		slimpro_i2c_pcc_tx_prepare(ctx, msg);
+	}
+
 	rc = mbox_send_message(ctx->mbox_chan, msg);
 	if (rc < 0)
 		goto err;
@@ -159,6 +242,10 @@ static int slimpro_i2c_send_msg(struct slimpro_i2c_dev *ctx,
 	rc = start_i2c_msg_xfer(ctx);
 
 err:
+	if (!acpi_disabled) {
+		mbox_chan_txdone(ctx->mbox_chan, 0);
+		mutex_unlock(&ctx->tx_mutex);
+	}
 	ctx->resp_msg = NULL;
 
 	return rc;
@@ -375,21 +462,78 @@ static int xgene_slimpro_i2c_probe(struct platform_device *pdev)
 
 	ctx->dev = &pdev->dev;
 	platform_set_drvdata(pdev, ctx);
+	mutex_init(&ctx->tx_mutex);
 	cl = &ctx->mbox_client;
 
 	/* Request mailbox channel */
 	cl->dev = &pdev->dev;
-	cl->rx_callback = slimpro_i2c_rx_cb;
-	cl->tx_block = true;
 	init_completion(&ctx->rd_complete);
 	cl->tx_tout = MAILBOX_OP_TIMEOUT;
 	cl->knows_txdone = false;
-	ctx->mbox_chan = mbox_request_channel(cl, MAILBOX_I2C_INDEX);
-	if (IS_ERR(ctx->mbox_chan)) {
-		dev_err(&pdev->dev, "i2c mailbox channel request failed\n");
-		return PTR_ERR(ctx->mbox_chan);
-	}
+	if (acpi_disabled) {
+		cl->tx_block = true;
+		cl->rx_callback = slimpro_i2c_rx_cb;
+		ctx->mbox_chan = mbox_request_channel(cl, MAILBOX_I2C_INDEX);
+		if (IS_ERR(ctx->mbox_chan)) {
+			dev_err(&pdev->dev, "i2c mailbox channel request failed\n");
+			return PTR_ERR(ctx->mbox_chan);
+		}
+	} else {
+		struct acpi_pcct_hw_reduced *cppc_ss;
+
+		if (device_property_read_u32(&pdev->dev, "pcc-channel",
+					     &ctx->mbox_idx))
+			ctx->mbox_idx = MAILBOX_I2C_INDEX;
+
+		cl->tx_block = false;
+		cl->rx_callback = slimpro_i2c_pcc_rx_cb;
+		ctx->mbox_chan = pcc_mbox_request_channel(cl, ctx->mbox_idx);
+		if (IS_ERR(ctx->mbox_chan)) {
+			dev_err(&pdev->dev, "PCC mailbox channel request failed\n");
+			return PTR_ERR(ctx->mbox_chan);
+		}
+
+		/*
+		 * The PCC mailbox controller driver should
+		 * have parsed the PCCT (global table of all
+		 * PCC channels) and stored pointers to the
+		 * subspace communication region in con_priv.
+		 */
+		cppc_ss = ctx->mbox_chan->con_priv;
+		if (!cppc_ss) {
+			dev_err(&pdev->dev, "PPC subspace not found\n");
+			rc = -ENODEV;
+			goto mbox_err;
+		}
+
+		if (!ctx->mbox_chan->mbox->txdone_irq) {
+			dev_err(&pdev->dev, "PCC IRQ not supported\n");
+			rc = -ENODEV;
+			goto mbox_err;
+		}
 
+		/*
+		 * This is the shared communication region
+		 * for the OS and Platform to communicate over.
+		 */
+		ctx->comm_base_addr = cppc_ss->base_address;
+		if (ctx->comm_base_addr) {
+			ctx->pcc_comm_addr = memremap(ctx->comm_base_addr,
+						      cppc_ss->length,
+						      MEMREMAP_WB);
+		} else {
+			dev_err(&pdev->dev, "Failed to get PCC comm region\n");
+			rc = -ENODEV;
+			goto mbox_err;
+		}
+
+		if (!ctx->pcc_comm_addr) {
+			dev_err(&pdev->dev,
+				"Failed to memremap PCC comm region\n");
+			rc = -ENOMEM;
+			goto mbox_err;
+		}
+	}
 	rc = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(64));
 	if (rc)
 		dev_warn(&pdev->dev, "Unable to set dma mask\n");
@@ -403,13 +547,19 @@ static int xgene_slimpro_i2c_probe(struct platform_device *pdev)
 	adapter->dev.of_node = pdev->dev.of_node;
 	i2c_set_adapdata(adapter, ctx);
 	rc = i2c_add_adapter(adapter);
-	if (rc) {
-		mbox_free_channel(ctx->mbox_chan);
-		return rc;
-	}
+	if (rc)
+		goto mbox_err;
 
 	dev_info(&pdev->dev, "Mailbox I2C Adapter registered\n");
 	return 0;
+
+mbox_err:
+	if (acpi_disabled)
+		mbox_free_channel(ctx->mbox_chan);
+	else
+		pcc_mbox_free_channel(ctx->mbox_chan);
+
+	return rc;
 }
 
 static int xgene_slimpro_i2c_remove(struct platform_device *pdev)
@@ -418,7 +568,10 @@ static int xgene_slimpro_i2c_remove(struct platform_device *pdev)
 
 	i2c_del_adapter(&ctx->adapter);
 
-	mbox_free_channel(ctx->mbox_chan);
+	if (acpi_disabled)
+		mbox_free_channel(ctx->mbox_chan);
+	else
+		pcc_mbox_free_channel(ctx->mbox_chan);
 
 	return 0;
 }
-- 
1.9.1

  parent reply	other threads:[~2017-03-28 20:46 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-03-28 20:46 [PATCH 0/2] i2c: xgene-slimpro: Add ACPI support Hoan Tran
2017-03-28 20:46 ` [PATCH 1/2] i2c: xgene-slimpro: Use a single function to send command message Hoan Tran
2017-03-28 20:46 ` Hoan Tran [this message]
2017-04-20  8:05   ` [PATCH 2/2] i2c: xgene-slimpro: Add ACPI support by using PCC mailbox Wolfram Sang
2017-04-20 20:38     ` Hoan Tran
2017-04-21  6:31       ` Wolfram Sang
2017-04-17 16:36 ` [PATCH 0/2] i2c: xgene-slimpro: Add ACPI support Hoan Tran

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1490733977-23760-3-git-send-email-hotran@apm.com \
    --to=hotran@apm.com \
    --cc=kchudgar@apm.com \
    --cc=lho@apm.com \
    --cc=linux-i2c@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=wsa@the-dreams.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).