From: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
To: robh@kernel.org, linux-serial@vger.kernel.org
Cc: linux-renesas-soc@vger.kernel.org, magnus.damm@gmail.com,
laurent.pinchart@ideasonboard.com, wsa@the-dreams.de,
linux-i2c@vger.kernel.org,
Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
Subject: [RFC 1/4] serdev: add method to set parity
Date: Wed, 14 Jun 2017 16:38:47 +0200 [thread overview]
Message-ID: <1497451130-7741-2-git-send-email-ulrich.hecht+renesas@gmail.com> (raw)
In-Reply-To: <1497451130-7741-1-git-send-email-ulrich.hecht+renesas@gmail.com>
Adds serdev_device_set_parity() and an implementation for ttyport.
Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
---
drivers/tty/serdev/core.c | 12 ++++++++++++
drivers/tty/serdev/serdev-ttyport.c | 17 +++++++++++++++++
include/linux/serdev.h | 4 ++++
3 files changed, 33 insertions(+)
diff --git a/drivers/tty/serdev/core.c b/drivers/tty/serdev/core.c
index f71b473..1fbaa4c 100644
--- a/drivers/tty/serdev/core.c
+++ b/drivers/tty/serdev/core.c
@@ -242,6 +242,18 @@ int serdev_device_set_tiocm(struct serdev_device *serdev, int set, int clear)
}
EXPORT_SYMBOL_GPL(serdev_device_set_tiocm);
+int serdev_device_set_parity(struct serdev_device *serdev,
+ bool enable, bool odd)
+{
+ struct serdev_controller *ctrl = serdev->ctrl;
+
+ if (!ctrl || !ctrl->ops->set_parity)
+ return -ENOTSUPP;
+
+ return ctrl->ops->set_parity(ctrl, enable, odd);
+}
+EXPORT_SYMBOL_GPL(serdev_device_set_parity);
+
static int serdev_drv_probe(struct device *dev)
{
const struct serdev_device_driver *sdrv = to_serdev_device_driver(dev->driver);
diff --git a/drivers/tty/serdev/serdev-ttyport.c b/drivers/tty/serdev/serdev-ttyport.c
index 302018d..9114956 100644
--- a/drivers/tty/serdev/serdev-ttyport.c
+++ b/drivers/tty/serdev/serdev-ttyport.c
@@ -195,6 +195,22 @@ static int ttyport_set_tiocm(struct serdev_controller *ctrl, unsigned int set, u
return tty->driver->ops->tiocmset(tty, set, clear);
}
+static int ttyport_set_parity(struct serdev_controller *ctrl,
+ bool enable, bool odd)
+{
+ struct serport *serport = serdev_controller_get_drvdata(ctrl);
+ struct tty_struct *tty = serport->tty;
+ struct ktermios ktermios = tty->termios;
+
+ ktermios.c_cflag &= ~(PARENB | PARODD);
+ if (enable)
+ ktermios.c_cflag |= PARENB;
+ if (odd)
+ ktermios.c_cflag |= PARODD;
+
+ return tty_set_termios(tty, &ktermios);
+}
+
static const struct serdev_controller_ops ctrl_ops = {
.write_buf = ttyport_write_buf,
.write_flush = ttyport_write_flush,
@@ -206,6 +222,7 @@ static const struct serdev_controller_ops ctrl_ops = {
.wait_until_sent = ttyport_wait_until_sent,
.get_tiocm = ttyport_get_tiocm,
.set_tiocm = ttyport_set_tiocm,
+ .set_parity = ttyport_set_parity,
};
struct device *serdev_tty_port_register(struct tty_port *port,
diff --git a/include/linux/serdev.h b/include/linux/serdev.h
index e69402d..8b67fcd 100644
--- a/include/linux/serdev.h
+++ b/include/linux/serdev.h
@@ -90,6 +90,7 @@ struct serdev_controller_ops {
void (*wait_until_sent)(struct serdev_controller *, long);
int (*get_tiocm)(struct serdev_controller *);
int (*set_tiocm)(struct serdev_controller *, unsigned int, unsigned int);
+ int (*set_parity)(struct serdev_controller *, bool, bool);
};
/**
@@ -298,6 +299,9 @@ static inline int serdev_device_set_rts(struct serdev_device *serdev, bool enabl
return serdev_device_set_tiocm(serdev, 0, TIOCM_RTS);
}
+int serdev_device_set_parity(struct serdev_device *serdev,
+ bool enable, bool odd);
+
/*
* serdev hooks into TTY core
*/
--
2.7.4
next prev parent reply other threads:[~2017-06-14 14:39 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-06-14 14:38 [RFC 0/4] serdev GPIO-based multiplexing support Ulrich Hecht
2017-06-14 14:38 ` Ulrich Hecht [this message]
2017-06-14 14:38 ` [RFC 2/4] serdev: add GPIO-based multiplexer support Ulrich Hecht
2017-06-15 9:34 ` Geert Uytterhoeven
2017-06-14 14:38 ` [RFC 3/4] max9260: add driver for i2c over GMSL passthrough Ulrich Hecht
2017-06-15 7:09 ` Peter Rosin
2017-06-15 15:37 ` Wolfram Sang
2017-06-14 14:38 ` [RFC 4/4] ARM: dts: blanche: add SCIF1 and MAX9260 deserializer Ulrich Hecht
2017-06-15 13:05 ` Rob Herring
2017-06-15 7:07 ` [RFC 0/4] serdev GPIO-based multiplexing support Peter Rosin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1497451130-7741-2-git-send-email-ulrich.hecht+renesas@gmail.com \
--to=ulrich.hecht+renesas@gmail.com \
--cc=laurent.pinchart@ideasonboard.com \
--cc=linux-i2c@vger.kernel.org \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=linux-serial@vger.kernel.org \
--cc=magnus.damm@gmail.com \
--cc=robh@kernel.org \
--cc=wsa@the-dreams.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).