From mboxrd@z Thu Jan 1 00:00:00 1970 From: Radoslaw Pietrzyk Subject: [PATCH] i2c: stm32: Fixes multibyte transfer for STM32F4 I2C controller Date: Wed, 11 Oct 2017 13:53:08 +0200 Message-ID: <1507722788-31224-1-git-send-email-radoslaw.pietrzyk@gmail.com> Return-path: Sender: linux-kernel-owner@vger.kernel.org To: Wolfram Sang , Maxime Coquelin , Alexandre Torgue , "open list:I2C SUBSYSTEM" , "moderated list:ARM/STM32 ARCHITECTURE" , open list Cc: Radoslaw Pietrzyk List-Id: linux-i2c@vger.kernel.org Do not read data on RXNE but on BTF only due to HW synchronisation problems and NACKing read data too early. It was found during testing of stmpe811 touchscreen driver. Signed-off-by: Radoslaw Pietrzyk --- drivers/i2c/busses/i2c-stm32f4.c | 11 +---------- 1 file changed, 1 insertion(+), 10 deletions(-) diff --git a/drivers/i2c/busses/i2c-stm32f4.c b/drivers/i2c/busses/i2c-stm32f4.c index 4ec1084..86bcf4c 100644 --- a/drivers/i2c/busses/i2c-stm32f4.c +++ b/drivers/i2c/busses/i2c-stm32f4.c @@ -409,16 +409,9 @@ static void stm32f4_i2c_handle_read(struct stm32f4_i2c_dev *i2c_dev) * So, here we just disable buffer interrupt in order to avoid another * system preemption due to RX not empty event. */ - case 2: - case 3: + default: stm32f4_i2c_clr_bits(reg, STM32F4_I2C_CR2_ITBUFEN); break; - /* - * For N byte reception with N > 3 we directly read data register - * until N-2 data. - */ - default: - stm32f4_i2c_read_msg(i2c_dev); } } @@ -470,8 +463,6 @@ static void stm32f4_i2c_handle_rx_done(struct stm32f4_i2c_dev *i2c_dev) */ reg = i2c_dev->base + STM32F4_I2C_CR1; stm32f4_i2c_clr_bits(reg, STM32F4_I2C_CR1_ACK); - stm32f4_i2c_read_msg(i2c_dev); - break; default: stm32f4_i2c_read_msg(i2c_dev); } -- 1.9.1