From mboxrd@z Thu Jan 1 00:00:00 1970 From: Sven Van Asbroeck Subject: [PATCH] eeprom: at24: fix I2C device selection for runtime PM Date: Fri, 1 Dec 2017 13:04:41 -0500 Message-ID: <1512151481-27483-1-git-send-email-svendev@arcx.com> Mime-Version: 1.0 Content-Type: text/plain Return-path: Sender: linux-kernel-owner@vger.kernel.org To: svendev@arcx.com, linux-kernel@vger.kernel.org, linux-i2c@vger.kernel.org Cc: divagar.mohandass@intel.com, sakari.ailus@linux.intel.com, brgl@bgdev.pl List-Id: linux-i2c@vger.kernel.org From: Sakari Ailus The at24 driver creates dummy I2C devices to access offsets in the chip that are outside the area supported using a single I2C address. It is not meaningful to use runtime PM to such devices; the system firmware (ACPI) does not know about these devices nor runtime PM was enabled for them. Always use the real device instead of the dummy ones. Fixes: 98e8201039af ("eeprom: at24: enable runtime pm support") Signed-off-by: Sakari Ailus Tested-by: Sven Van Asbroeck on a 24AA16/24LC16B [Bartosz: rebased on top of previous fixes for 4.15, tweaked the commit message] [Sven: fixed Bartosz's rebase] Signed-off-by: Sven Van Asbroeck Signed-off-by: Bartosz Golaszewski --- drivers/misc/eeprom/at24.c | 24 ++++++++++-------------- 1 file changed, 10 insertions(+), 14 deletions(-) diff --git a/drivers/misc/eeprom/at24.c b/drivers/misc/eeprom/at24.c index e0b4b36..07b6b61 100644 --- a/drivers/misc/eeprom/at24.c +++ b/drivers/misc/eeprom/at24.c @@ -561,18 +561,16 @@ static ssize_t at24_eeprom_write_i2c(struct at24_data *at24, const char *buf, static int at24_read(void *priv, unsigned int off, void *val, size_t count) { struct at24_data *at24 = priv; - struct i2c_client *client; + struct device *dev = &at24->client[0]->dev; char *buf = val; int ret; if (unlikely(!count)) return count; - client = at24_translate_offset(at24, &off); - - ret = pm_runtime_get_sync(&client->dev); + ret = pm_runtime_get_sync(dev); if (ret < 0) { - pm_runtime_put_noidle(&client->dev); + pm_runtime_put_noidle(dev); return ret; } @@ -588,7 +586,7 @@ static int at24_read(void *priv, unsigned int off, void *val, size_t count) status = at24->read_func(at24, buf, off, count); if (status < 0) { mutex_unlock(&at24->lock); - pm_runtime_put(&client->dev); + pm_runtime_put(dev); return status; } buf += status; @@ -598,7 +596,7 @@ static int at24_read(void *priv, unsigned int off, void *val, size_t count) mutex_unlock(&at24->lock); - pm_runtime_put(&client->dev); + pm_runtime_put(dev); return 0; } @@ -606,18 +604,16 @@ static int at24_read(void *priv, unsigned int off, void *val, size_t count) static int at24_write(void *priv, unsigned int off, void *val, size_t count) { struct at24_data *at24 = priv; - struct i2c_client *client; + struct device *dev = &at24->client[0]->dev; char *buf = val; int ret; if (unlikely(!count)) return -EINVAL; - client = at24_translate_offset(at24, &off); - - ret = pm_runtime_get_sync(&client->dev); + ret = pm_runtime_get_sync(dev); if (ret < 0) { - pm_runtime_put_noidle(&client->dev); + pm_runtime_put_noidle(dev); return ret; } @@ -633,7 +629,7 @@ static int at24_write(void *priv, unsigned int off, void *val, size_t count) status = at24->write_func(at24, buf, off, count); if (status < 0) { mutex_unlock(&at24->lock); - pm_runtime_put(&client->dev); + pm_runtime_put(dev); return status; } buf += status; @@ -643,7 +639,7 @@ static int at24_write(void *priv, unsigned int off, void *val, size_t count) mutex_unlock(&at24->lock); - pm_runtime_put(&client->dev); + pm_runtime_put(dev); return 0; } -- 1.9.1