Re: i2c-designware: sound and s2ram broken on Broadwell-U system since commit ca382f5b38f367b6 (add i2c gpio recovery option)

[Andy Shevchenko <andriy.shevchenko@linux.intel.com>]

On Sat, 2018-02-17 at 17:02 +0200, Andy Shevchenko wrote:
> On Sat, 2018-02-17 at 14:25 +0100, Dominik Brodowski wrote:
> 
> > on v4.16-rc1+, sound does not work any more on my Dell XPS 13;
> > suspend-to-RAM hangs as well. I have bisected this problem down to
> > commit ca382f5b38f3; reverting this on top of Linus' latest
> > (1e3510b2b053)
> > fixes these issues.
> > And a few snippets from a broken kernel dmesg:
> > 
> > 	i2c_designware: probe of INT3432:00 failed with error -38
> > 	i2c_designware: probe of INT3433:00 failed with error -38
> 
> ENOSYS here at probe time, taking into account the commit you think is
> a
> culprit, can be passed from gpiod_get() calls only.
> 
> > Ideas on how to fix this properly?
> 
> Enable CONFIG_DEBUG_GPIO first and share through some service the
> dmesg.
> (it might be good idea to add 'ignore_loglevel initcall_debug' to the
> kernel command line)

And tell if the following patch helps.

--- a/drivers/i2c/busses/i2c-designware-master.c
+++ b/drivers/i2c/busses/i2c-designware-master.c
@@ -644,7 +644,7 @@ static int i2c_dw_init_recovery_info(struct
dw_i2c_dev *dev)
        gpio = devm_gpiod_get(dev->dev, "scl", GPIOD_OUT_HIGH);
        if (IS_ERR(gpio)) {
                r = PTR_ERR(gpio);
-               if (r == -ENOENT)
+               if (r == -ENOENT || r == -ENOSYS)
                        return 0;
                return r;
        }

-- 
Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Intel Finland Oy