From: Alain Volmat <alain.volmat@st.com>
To: wsa@the-dreams.de, pierre-yves.mordret@st.com
Cc: alain.volmat@st.com, alexandre.torgue@st.com,
linux-i2c@vger.kernel.org,
linux-stm32@st-md-mailman.stormreply.com,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, fabrice.gasnier@st.com
Subject: [PATCH] i2c: stm32: don't print an error on probe deferral
Date: Thu, 19 Mar 2020 19:22:16 +0100 [thread overview]
Message-ID: <1584642136-15418-1-git-send-email-alain.volmat@st.com> (raw)
From: Etienne Carriere <etienne.carriere@st.com>
Do not print an error trace when deferring probe for some resource.
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>
Signed-off-by: Alain Volmat <alain.volmat@st.com>
---
drivers/i2c/busses/i2c-stm32.c | 10 +++++++---
drivers/i2c/busses/i2c-stm32f4.c | 4 +++-
drivers/i2c/busses/i2c-stm32f7.c | 7 +++++--
3 files changed, 15 insertions(+), 6 deletions(-)
diff --git a/drivers/i2c/busses/i2c-stm32.c b/drivers/i2c/busses/i2c-stm32.c
index 1da347e6a358..7be559858402 100644
--- a/drivers/i2c/busses/i2c-stm32.c
+++ b/drivers/i2c/busses/i2c-stm32.c
@@ -25,8 +25,9 @@ struct stm32_i2c_dma *stm32_i2c_dma_request(struct device *dev,
/* Request and configure I2C TX dma channel */
dma->chan_tx = dma_request_chan(dev, "tx");
if (IS_ERR(dma->chan_tx)) {
- dev_dbg(dev, "can't request DMA tx channel\n");
ret = PTR_ERR(dma->chan_tx);
+ if (ret != -EPROBE_DEFER)
+ dev_dbg(dev, "can't request DMA tx channel\n");
goto fail_al;
}
@@ -44,8 +45,10 @@ struct stm32_i2c_dma *stm32_i2c_dma_request(struct device *dev,
/* Request and configure I2C RX dma channel */
dma->chan_rx = dma_request_chan(dev, "rx");
if (IS_ERR(dma->chan_rx)) {
- dev_err(dev, "can't request DMA rx channel\n");
ret = PTR_ERR(dma->chan_rx);
+ if (ret != -EPROBE_DEFER)
+ dev_err(dev, "can't request DMA rx channel\n");
+
goto fail_tx;
}
@@ -73,7 +76,8 @@ struct stm32_i2c_dma *stm32_i2c_dma_request(struct device *dev,
dma_release_channel(dma->chan_tx);
fail_al:
devm_kfree(dev, dma);
- dev_info(dev, "can't use DMA\n");
+ if (ret != -EPROBE_DEFER)
+ dev_info(dev, "can't use DMA\n");
return ERR_PTR(ret);
}
diff --git a/drivers/i2c/busses/i2c-stm32f4.c b/drivers/i2c/busses/i2c-stm32f4.c
index ba600d77a3f8..1b8cad506ad7 100644
--- a/drivers/i2c/busses/i2c-stm32f4.c
+++ b/drivers/i2c/busses/i2c-stm32f4.c
@@ -797,8 +797,10 @@ static int stm32f4_i2c_probe(struct platform_device *pdev)
rst = devm_reset_control_get_exclusive(&pdev->dev, NULL);
if (IS_ERR(rst)) {
- dev_err(&pdev->dev, "Error: Missing controller reset\n");
ret = PTR_ERR(rst);
+ if (ret != -EPROBE_DEFER)
+ dev_err(&pdev->dev, "Error: Missing reset ctrl\n");
+
goto clk_free;
}
reset_control_assert(rst);
diff --git a/drivers/i2c/busses/i2c-stm32f7.c b/drivers/i2c/busses/i2c-stm32f7.c
index 78d40a4cc282..ab95ed52a7dc 100644
--- a/drivers/i2c/busses/i2c-stm32f7.c
+++ b/drivers/i2c/busses/i2c-stm32f7.c
@@ -1915,7 +1915,8 @@ static int stm32f7_i2c_probe(struct platform_device *pdev)
i2c_dev->clk = devm_clk_get(&pdev->dev, NULL);
if (IS_ERR(i2c_dev->clk)) {
- dev_err(&pdev->dev, "Error: Missing controller clock\n");
+ if (PTR_ERR(i2c_dev->clk) != -EPROBE_DEFER)
+ dev_err(&pdev->dev, "Failed to get controller clock\n");
return PTR_ERR(i2c_dev->clk);
}
@@ -1941,8 +1942,10 @@ static int stm32f7_i2c_probe(struct platform_device *pdev)
rst = devm_reset_control_get(&pdev->dev, NULL);
if (IS_ERR(rst)) {
- dev_err(&pdev->dev, "Error: Missing controller reset\n");
ret = PTR_ERR(rst);
+ if (ret != -EPROBE_DEFER)
+ dev_err(&pdev->dev, "Error: Missing reset ctrl\n");
+
goto clk_free;
}
reset_control_assert(rst);
--
2.7.4
next reply other threads:[~2020-03-19 18:22 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-03-19 18:22 Alain Volmat [this message]
2020-03-30 8:40 ` [PATCH] i2c: stm32: don't print an error on probe deferral Pierre Yves MORDRET
2020-04-15 11:01 ` Wolfram Sang
2020-04-20 15:11 ` Alain Volmat
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1584642136-15418-1-git-send-email-alain.volmat@st.com \
--to=alain.volmat@st.com \
--cc=alexandre.torgue@st.com \
--cc=fabrice.gasnier@st.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-i2c@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-stm32@st-md-mailman.stormreply.com \
--cc=pierre-yves.mordret@st.com \
--cc=wsa@the-dreams.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).