From: Yicong Yang <yangyicong@hisilicon.com>
To: <wsa@kernel.org>, <andriy.shevchenko@linux.intel.com>,
<linux-i2c@vger.kernel.org>, <Sergey.Semin@baikalelectronics.ru>,
<linux-kernel@vger.kernel.org>
Cc: <digetx@gmail.com>, <treding@nvidia.com>,
<jarkko.nikula@linux.intel.com>, <rmk+kernel@armlinux.org.uk>,
<song.bao.hua@hisilicon.com>, <john.garry@huawei.com>,
<mika.westerberg@linux.intel.com>, <yangyicong@hisilicon.com>,
<prime.zeng@huawei.com>, <linuxarm@huawei.com>
Subject: [PATCH v7 0/5] Add support for HiSilicon I2C controller
Date: Thu, 8 Apr 2021 19:17:16 +0800 [thread overview]
Message-ID: <1617880641-664-1-git-send-email-yangyicong@hisilicon.com> (raw)
Add driver and MAINTAINERS for HiSilicon I2C controller on Kunpeng SoC. Also
provide the devm_*() variants for adding the I2C adapters. Add a public
api to provide I2C frequency mode strings and convert designware driver
to use it.
Change since v6:
- make the i2c_freq_mode_string() exported rather than inline
- addressed the comments from Wolfram and Jarkko for the driver
Change since v5:
- address the comment from Dmitry and add his Reviewed-by
- address the comment from Jarkko and add his Reviewed-by and Tested-by
- add Jarkko's Acked-by for designware patch
Link: https://lore.kernel.org/linux-i2c/1617113966-40498-1-git-send-email-yangyicong@hisilicon.com/
Change since v4:
- and Andy's Reviewed-by
- attach Andy's patch of switch designware driver to use i2c_freq_mode_string()
Link: https://lore.kernel.org/linux-i2c/1617109549-4013-1-git-send-email-yangyicong@hisilicon.com/
Link: https://lore.kernel.org/linux-i2c/20210330134633.29889-1-andriy.shevchenko@linux.intel.com/
Change since v3:
- split the bus mode string api to I2C as suggested by Andy
- simplify the devm variants and change the export format
- address the comments of the HiSilicon I2C driver from Andy and Dmitry, thanks!
Link: https://lore.kernel.org/linux-i2c/1616411413-7177-1-git-send-email-yangyicong@hisilicon.com/
Change since v2:
- handle -EPROBE_DEFER case when get irq number by platform_get_irq()
Link: https://lore.kernel.org/linux-i2c/1615296137-14558-1-git-send-email-yangyicong@hisilicon.com/
Change since v1:
- fix compile test error on 32bit arch, reported by intel lkp robot:
64 bit division without using kernel wrapper in probe function.
Link:https://lore.kernel.org/linux-i2c/1615016946-55670-1-git-send-email-yangyicong@hisilicon.com/
Andy Shevchenko (1):
i2c: designware: Switch over to i2c_freq_mode_string()
Yicong Yang (4):
i2c: core: add managed function for adding i2c adapters
i2c: core: add api to provide frequency mode strings
i2c: add support for HiSilicon I2C controller
MAINTAINERS: Add maintainer for HiSilicon I2C driver
MAINTAINERS | 7 +
drivers/i2c/busses/Kconfig | 10 +
drivers/i2c/busses/Makefile | 1 +
drivers/i2c/busses/i2c-designware-master.c | 20 +-
drivers/i2c/busses/i2c-hisi.c | 504 +++++++++++++++++++++++++++++
drivers/i2c/i2c-core-base.c | 47 +++
include/linux/i2c.h | 4 +
7 files changed, 577 insertions(+), 16 deletions(-)
create mode 100644 drivers/i2c/busses/i2c-hisi.c
--
2.8.1
next reply other threads:[~2021-04-08 11:20 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-04-08 11:17 Yicong Yang [this message]
2021-04-08 11:17 ` [PATCH v7 1/5] i2c: core: add managed function for adding i2c adapters Yicong Yang
2021-04-08 11:17 ` [PATCH v7 2/5] i2c: core: add api to provide frequency mode strings Yicong Yang
2021-04-08 20:55 ` Wolfram Sang
2021-04-09 10:36 ` Andy Shevchenko
2021-04-09 11:37 ` Wolfram Sang
2021-04-09 11:40 ` Andy Shevchenko
2021-04-09 13:49 ` Yicong Yang
2021-04-08 11:17 ` [PATCH v7 3/5] i2c: add support for HiSilicon I2C controller Yicong Yang
2021-04-08 11:17 ` [PATCH v7 4/5] MAINTAINERS: Add maintainer for HiSilicon I2C driver Yicong Yang
2021-04-08 20:57 ` Wolfram Sang
2021-04-08 11:17 ` [PATCH v7 5/5] i2c: designware: Switch over to i2c_freq_mode_string() Yicong Yang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1617880641-664-1-git-send-email-yangyicong@hisilicon.com \
--to=yangyicong@hisilicon.com \
--cc=Sergey.Semin@baikalelectronics.ru \
--cc=andriy.shevchenko@linux.intel.com \
--cc=digetx@gmail.com \
--cc=jarkko.nikula@linux.intel.com \
--cc=john.garry@huawei.com \
--cc=linux-i2c@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linuxarm@huawei.com \
--cc=mika.westerberg@linux.intel.com \
--cc=prime.zeng@huawei.com \
--cc=rmk+kernel@armlinux.org.uk \
--cc=song.bao.hua@hisilicon.com \
--cc=treding@nvidia.com \
--cc=wsa@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).