Re: [RESEND v2 09/10] dt-bindings: i2c: imx-lpi2c: Add i.MX8DXL compatible match

Rob Herring
2021-10-01T13:18:00Z

On Fri, 01 Oct 2021 11:11:34 +0300, Abel Vesa wrote:
> Add i.MX8DXL lpi2c compatible to the bindings documentation.
>
> Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
> ---
> Documentation/devicetree/bindings/i2c/i2c-imx-lpi2c.yaml | 2 ++
> 1 file changed, 2 insertions(+)
>

Running 'make dtbs_check' with the schema in this patch gives the
following warnings. Consider if they are expected or the schema is
incorrect. These may not be new warnings.

Note that it is not yet a requirement to have 0 warnings for dtbs_check.
This will change in the future.

Full log is available here: https://patchwork.ozlabs.org/patch/1535241

i2c@5a800000: compatible: 'oneOf' conditional failed, one must be fixed:
arch/arm64/boot/dts/freescale/imx8qm-mek.dt.yaml
arch/arm64/boot/dts/freescale/imx8qxp-ai_ml.dt.yaml
arch/arm64/boot/dts/freescale/imx8qxp-colibri-eval-v3.dt.yaml
arch/arm64/boot/dts/freescale/imx8qxp-mek.dt.yaml

i2c@5a810000: compatible: 'oneOf' conditional failed, one must be fixed:
arch/arm64/boot/dts/freescale/imx8qm-mek.dt.yaml
arch/arm64/boot/dts/freescale/imx8qxp-ai_ml.dt.yaml
arch/arm64/boot/dts/freescale/imx8qxp-colibri-eval-v3.dt.yaml
arch/arm64/boot/dts/freescale/imx8qxp-mek.dt.yaml

i2c@5a820000: compatible: 'oneOf' conditional failed, one must be fixed:
arch/arm64/boot/dts/freescale/imx8qm-mek.dt.yaml
arch/arm64/boot/dts/freescale/imx8qxp-ai_ml.dt.yaml
arch/arm64/boot/dts/freescale/imx8qxp-colibri-eval-v3.dt.yaml
arch/arm64/boot/dts/freescale/imx8qxp-mek.dt.yaml

i2c@5a830000: compatible: 'oneOf' conditional failed, one must be fixed:
arch/arm64/boot/dts/freescale/imx8qm-mek.dt.yaml
arch/arm64/boot/dts/freescale/imx8qxp-ai_ml.dt.yaml
arch/arm64/boot/dts/freescale/imx8qxp-colibri-eval-v3.dt.yaml
arch/arm64/boot/dts/freescale/imx8qxp-mek.dt.yaml