Re: [PATCH v2 1/2] dt-bindings: i2c: Document RZ/V2M I2C controller

[Rob Herring <robh@kernel.org>]

On Tue, 28 Jun 2022 20:45:25 +0100, Phil Edworthy wrote:
> Document Renesas RZ/V2M (r9a09g011) I2C controller bindings.
> 
> Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com>
> Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
> ---
> v2:
>  - Use an enum and set the default for clock-frequency
>  - Add resets property
> ---
>  .../bindings/i2c/renesas,rzv2m.yaml           | 80 +++++++++++++++++++
>  1 file changed, 80 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/i2c/renesas,rzv2m.yaml
> 

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:

dtschema/dtc warnings/errors:
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml: patternProperties:^thermistor@:properties:adi,excitation-current-nanoamp: '$ref' should not be valid under {'const': '$ref'}
	hint: Standard unit suffix properties don't need a type $ref
	from schema $id: http://devicetree.org/meta-schemas/core.yaml#
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml: ignoring, error in schema: patternProperties: ^thermistor@: properties: adi,excitation-current-nanoamp
Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.example.dtb:0:0: /example-0/spi/ltc2983@0: failed to match any schema with compatible: ['adi,ltc2983']

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/patch/

This check can fail if there are any dependencies. The base for a patch
series is generally the most recent rc1.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit.