linux-i2c.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Heiner Kallweit <hkallweit1@gmail.com>
To: Wolfram Sang <wsa@the-dreams.de>, Jerome Brunet <jbrunet@baylibre.com>
Cc: "linux-i2c@vger.kernel.org" <linux-i2c@vger.kernel.org>,
	linux-amlogic@lists.infradead.org
Subject: [PATCH v2 03/10] i2c: meson: use i2c core for DT clock-frequency parsing
Date: Thu, 9 Mar 2017 07:39:15 +0100	[thread overview]
Message-ID: <1b175225-9cb1-6c7c-3175-dcba8189fefe@gmail.com> (raw)
In-Reply-To: <f39c9314-4314-3d98-aef2-3bc3c815e63b@gmail.com>

We don't have to parse the DT manually to retrieve the bus frequency
and we don't have to maintain an own default for the bus frequency.
Let the i2c core do this for us.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Jerome Brunet <jbrunet@baylibre.com>
---
v2:
- added Reviewed-by
---
 drivers/i2c/busses/i2c-meson.c | 13 +++++--------
 1 file changed, 5 insertions(+), 8 deletions(-)

diff --git a/drivers/i2c/busses/i2c-meson.c b/drivers/i2c/busses/i2c-meson.c
index 50059d09..5e243efa 100644
--- a/drivers/i2c/busses/i2c-meson.c
+++ b/drivers/i2c/busses/i2c-meson.c
@@ -38,7 +38,6 @@
 #define REG_CTRL_CLKDIV_MASK	((BIT(10) - 1) << REG_CTRL_CLKDIV_SHIFT)
 
 #define I2C_TIMEOUT_MS		500
-#define DEFAULT_FREQ		100000
 
 enum {
 	TOKEN_END = 0,
@@ -73,7 +72,7 @@ enum {
  * @error:	Flag set when an error is received
  * @lock:	To avoid race conditions between irq handler and xfer code
  * @done:	Completion used to wait for transfer termination
- * @frequency:	Operating frequency of I2C bus clock
+ * @timings:	Struct including the bus frequency
  * @tokens:	Sequence of tokens to be written to the device
  * @num_tokens:	Number of tokens
  */
@@ -92,7 +91,7 @@ struct meson_i2c {
 
 	spinlock_t		lock;
 	struct completion	done;
-	unsigned int		frequency;
+	struct i2c_timings	timings;
 	u32			tokens[2];
 	int			num_tokens;
 };
@@ -136,12 +135,12 @@ static void meson_i2c_set_clk_div(struct meson_i2c *i2c)
 	unsigned long clk_rate = clk_get_rate(i2c->clk);
 	unsigned int div;
 
-	div = DIV_ROUND_UP(clk_rate, i2c->frequency * 4);
+	div = DIV_ROUND_UP(clk_rate, i2c->timings.bus_freq_hz * 4);
 	meson_i2c_set_mask(i2c, REG_CTRL, REG_CTRL_CLKDIV_MASK,
 			   div << REG_CTRL_CLKDIV_SHIFT);
 
 	dev_dbg(i2c->dev, "%s: clk %lu, freq %u, div %u\n", __func__,
-		clk_rate, i2c->frequency, div);
+		clk_rate, i2c->timings.bus_freq_hz, div);
 }
 
 static void meson_i2c_get_data(struct meson_i2c *i2c, char *buf, int len)
@@ -396,9 +395,7 @@ static int meson_i2c_probe(struct platform_device *pdev)
 	if (!i2c)
 		return -ENOMEM;
 
-	if (of_property_read_u32(pdev->dev.of_node, "clock-frequency",
-				 &i2c->frequency))
-		i2c->frequency = DEFAULT_FREQ;
+	i2c_parse_fw_timings(&pdev->dev, &i2c->timings, true);
 
 	i2c->dev = &pdev->dev;
 	platform_set_drvdata(pdev, i2c);
-- 
2.12.0

  parent reply	other threads:[~2017-03-09  7:12 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-03-09  6:33 [PATCH v2 00/10] i2c: meson: series with improvements Heiner Kallweit
2017-03-09  6:35 ` [PATCH v2 01/10] i2c: meson: i2c: meson: use min instead of min_t where min_t isn't needed Heiner Kallweit
2017-03-09  6:37 ` [PATCH v2 02/10] i2c: meson: remove member irq from struct meson_i2c Heiner Kallweit
2017-03-09  6:39 ` Heiner Kallweit [this message]
2017-03-09  8:26   ` [PATCH v2 03/10] i2c: meson: use i2c core for DT clock-frequency parsing Neil Armstrong
2017-03-09 20:13     ` Heiner Kallweit
2017-03-09  6:40 ` [PATCH v2 04/10] i2c: meson: use full 12 bits for clock divider Heiner Kallweit
2017-03-09  6:42 ` [PATCH v2 05/10] i2c: meson: set clock divider in probe instead of setting it for each transfer Heiner Kallweit
2017-03-10 23:17   ` Kevin Hilman
2017-03-10 23:36     ` Heiner Kallweit
2017-03-09  6:43 ` [PATCH v2 06/10] i2c: meson: remove variable count from meson_i2c_xfer Heiner Kallweit
2017-03-09  6:53 ` [PATCH v2 07/10] i2c: meson: improve interrupt handler and detect spurious interrupts Heiner Kallweit
2017-03-09  6:56 ` [PATCH v2 08/10] i2c: meson: don't create separate token chain just for the stop command Heiner Kallweit
2017-03-09  6:58 ` [PATCH v2 09/10] i2c: meson: remove meson_i2c_write_tokens Heiner Kallweit
2017-03-09  7:01 ` [PATCH v2 10/10] i2c: meson: improve and simplify interrupt handler Heiner Kallweit

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1b175225-9cb1-6c7c-3175-dcba8189fefe@gmail.com \
    --to=hkallweit1@gmail.com \
    --cc=jbrunet@baylibre.com \
    --cc=linux-amlogic@lists.infradead.org \
    --cc=linux-i2c@vger.kernel.org \
    --cc=wsa@the-dreams.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).