Re: [PATCH] i2c: riic: Simplify unsupported bus speed handling

[claudiu beznea <claudiu.beznea@tuxon.dev>]

On 22.08.2024 17:45, Geert Uytterhoeven wrote:
> Simplify checking for unsupported bus speeds and reporting errors by
> factoring out the calculation of the maximum bus speed, and by using the
> dev_err_probe() helper.
> 
> While at it, use "%u" for u32, and improve the error message.
> 
> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

Reviewed-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Tested-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>

> ---
>  drivers/i2c/busses/i2c-riic.c | 15 ++++++---------
>  1 file changed, 6 insertions(+), 9 deletions(-)
> 
> diff --git a/drivers/i2c/busses/i2c-riic.c b/drivers/i2c/busses/i2c-riic.c
> index a6996f3c17110dd7..c7f3a4c02470238c 100644
> --- a/drivers/i2c/busses/i2c-riic.c
> +++ b/drivers/i2c/busses/i2c-riic.c
> @@ -316,16 +316,13 @@ static int riic_init_hw(struct riic_dev *riic)
>  	struct i2c_timings *t = &riic->i2c_t;
>  	struct device *dev = riic->adapter.dev.parent;
>  	bool fast_mode_plus = riic->info->fast_mode_plus;
> +	u32 max_freq = fast_mode_plus ? I2C_MAX_FAST_MODE_PLUS_FREQ
> +				      : I2C_MAX_FAST_MODE_FREQ;
>  
> -	if ((!fast_mode_plus && t->bus_freq_hz > I2C_MAX_FAST_MODE_FREQ) ||
> -	    (fast_mode_plus && t->bus_freq_hz > I2C_MAX_FAST_MODE_PLUS_FREQ)) {
> -		dev_err(&riic->adapter.dev,
> -			"unsupported bus speed (%dHz). %d max\n",
> -			t->bus_freq_hz,
> -			fast_mode_plus ? I2C_MAX_FAST_MODE_PLUS_FREQ :
> -					 I2C_MAX_FAST_MODE_FREQ);
> -		return -EINVAL;
> -	}
> +	if (t->bus_freq_hz > max_freq)
> +		return dev_err_probe(&riic->adapter.dev, -EINVAL,
> +				     "unsupported bus speed %uHz (%u max)\n",
> +				     t->bus_freq_hz, max_freq);
>  
>  	rate = clk_get_rate(riic->clk);
>