From: Jean Delvare <khali-PUYAD+kWke1g9hUCZPvPmw@public.gmane.org>
To: David Brownell <david-b-yBeKhBN/0LDR7s880joybQ@public.gmane.org>
Cc: Greg KH <greg-U8xfFu+wG4EAvxtiuMwx3w@public.gmane.org>,
i2c-GZX6beZjE8VD60Wz+7aTrA@public.gmane.org
Subject: Re: i2c-remove-redundant-i2c_client-list.patch
Date: Thu, 17 Jan 2008 23:02:28 +0100 [thread overview]
Message-ID: <20080117230228.02b22bad@hyperion.delvare> (raw)
In-Reply-To: <200801141420.49274.david-b-yBeKhBN/0LDR7s880joybQ@public.gmane.org>
Hi David,
On Mon, 14 Jan 2008 14:20:48 -0800, David Brownell wrote:
> OK, here's the trimmed-down patch that leaves the deletion
> paths untouched until we have a better solution. I've only
> build-tested it, but it's basically $SUBJECT without those
> troublesome paths.
>
> - Dave
>
> ======= CUT HERE
> The i2c_adapter.clients list of i2c_client nodes duplicates driver
> model state. This patch starts removing that list, letting us remove
> most existing users of those i2c-core lists.
>
> * The core I2C code now iterates over the driver model's list instead
> of the i2c-internal one in some places where it's safe:
> - Passing a command/ioctl to each client, a mechanims
> used almost exclusively by DVB adapters;
> - Device address checking, in both i2c-core and i2c-dev.
>
> * Provide i2c_verify_client() to use with driver model iterators.
>
> * Flag the relevant i2c_adapter and i2c_client fields as deprecated,
> to help prevent new users from appearing.
>
> For the moment the list needs to stick around, since some issues show
> up when deleting devices created by legacy I2C drivers. (They don't
> follow standard driver model rules. Removing those devices can cause
> self-deadlocks.)
>
> Signed-off-by: David Brownell <dbrownell-Rn4VEauK+AKRv+LV9MX5uipxlwaOVQ5f@public.gmane.org>
> ---
> drivers/i2c/i2c-core.c | 78 ++++++++++++++++++++++++++++---------------------
> drivers/i2c/i2c-dev.c | 29 +++++++-----------
> include/linux/i2c.h | 8 +++--
> 3 files changed, 63 insertions(+), 52 deletions(-)
Looks good to me, I've applied that. I was about to suggest possible
improvements with regards to locking scope but I see that you have
already submitted an incremental patch so I'll review it first.
I've given some testing to this patch and I didn't see any problem.
Thanks,
--
Jean Delvare
_______________________________________________
i2c mailing list
i2c-GZX6beZjE8VD60Wz+7aTrA@public.gmane.org
http://lists.lm-sensors.org/mailman/listinfo/i2c
next prev parent reply other threads:[~2008-01-17 22:02 UTC|newest]
Thread overview: 39+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20071216052308.A0FB11668D7@adsl-69-226-248-13.dsl.pltn13.pacbell.net>
[not found] ` <20071216052308.A0FB11668D7-ZcXrCSuhvln6VZ3dlLfH/g4gEjPzgfUyLrfjE7I9kuVHxeISYlDBzl6hYfS7NtTn@public.gmane.org>
2007-12-27 20:58 ` [patch 2.6.24-rc5-git] add i2c_new_dummy() utility Byron Bradley
[not found] ` <57e2b00712271258l6ea661ai2bfd6b9e099c71be-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2007-12-27 21:53 ` David Brownell
[not found] ` <200712271353.05857.david-b-yBeKhBN/0LDR7s880joybQ@public.gmane.org>
2007-12-27 22:09 ` Byron Bradley
[not found] ` <57e2b00712271409n6c98f76o45116cd92b01f396-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2007-12-27 23:06 ` David Brownell
[not found] ` <200712271506.43069.david-b-yBeKhBN/0LDR7s880joybQ@public.gmane.org>
2007-12-27 23:37 ` Byron Bradley
2007-12-27 23:59 ` David Brownell
[not found] ` <200712281230.17840.david-b@pacbell.net>
[not found] ` <57e2b00712281645y70f6ec74s57945dc53f113ec8@mail.gmail.com>
[not found] ` <57e2b00712281645y70f6ec74s57945dc53f113ec8-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2007-12-30 3:05 ` David Brownell
[not found] ` <200712291905.15160.david-b-yBeKhBN/0LDR7s880joybQ@public.gmane.org>
2008-01-04 22:16 ` Jean Delvare
[not found] ` <20080104231633.135f2875-ig7AzVSIIG7kN2dkZ6Wm7A@public.gmane.org>
2008-01-04 23:48 ` David Brownell
[not found] ` <200801041548.54825.david-b-yBeKhBN/0LDR7s880joybQ@public.gmane.org>
2008-01-06 9:57 ` Jean Delvare
2008-01-06 11:23 ` i2c-remove-redundant-i2c_client-list.patch Jean Delvare
[not found] ` <20080106122356.78556b8a-ig7AzVSIIG7kN2dkZ6Wm7A@public.gmane.org>
2008-01-06 19:30 ` i2c-remove-redundant-i2c_client-list.patch David Brownell
[not found] ` <200801061130.31774.david-b-yBeKhBN/0LDR7s880joybQ@public.gmane.org>
2008-01-08 14:18 ` i2c-remove-redundant-i2c_client-list.patch Jean Delvare
[not found] ` <20080108151817.35e05c6c-ig7AzVSIIG7kN2dkZ6Wm7A@public.gmane.org>
2008-01-08 16:20 ` i2c-remove-redundant-i2c_client-list.patch Jean Delvare
[not found] ` <20080108172001.33de6afc-ig7AzVSIIG7kN2dkZ6Wm7A@public.gmane.org>
2008-01-08 19:12 ` i2c-remove-redundant-i2c_client-list.patch David Brownell
[not found] ` <200801081112.46972.david-b-yBeKhBN/0LDR7s880joybQ@public.gmane.org>
2008-01-08 20:50 ` i2c-remove-redundant-i2c_client-list.patch Jean Delvare
[not found] ` <20080108215042.534e32fa-ig7AzVSIIG7kN2dkZ6Wm7A@public.gmane.org>
2008-01-08 21:44 ` i2c-remove-redundant-i2c_client-list.patch David Brownell
[not found] ` <200801081344.45544.david-b-yBeKhBN/0LDR7s880joybQ@public.gmane.org>
2008-01-08 22:04 ` i2c-remove-redundant-i2c_client-list.patch Greg KH
[not found] ` <20080108220445.GB3873-U8xfFu+wG4EAvxtiuMwx3w@public.gmane.org>
2008-01-08 22:27 ` i2c-remove-redundant-i2c_client-list.patch David Brownell
2008-01-09 13:29 ` i2c-remove-redundant-i2c_client-list.patch Jean Delvare
[not found] ` <20080109142906.23a55f5f-ig7AzVSIIG7kN2dkZ6Wm7A@public.gmane.org>
2008-01-09 16:19 ` i2c-remove-redundant-i2c_client-list.patch Jean Delvare
[not found] ` <20080109171934.4f894bdc-ig7AzVSIIG7kN2dkZ6Wm7A@public.gmane.org>
2008-01-09 21:21 ` i2c-remove-redundant-i2c_client-list.patch David Brownell
[not found] ` <200801091321.29212.david-b-yBeKhBN/0LDR7s880joybQ@public.gmane.org>
2008-01-10 13:31 ` i2c-remove-redundant-i2c_client-list.patch Jean Delvare
[not found] ` <20080110143105.456ddaf0-ig7AzVSIIG7kN2dkZ6Wm7A@public.gmane.org>
2008-01-14 22:20 ` i2c-remove-redundant-i2c_client-list.patch David Brownell
[not found] ` <200801141420.49274.david-b-yBeKhBN/0LDR7s880joybQ@public.gmane.org>
2008-01-17 22:02 ` Jean Delvare [this message]
2008-01-18 10:14 ` i2c-remove-redundant-i2c_client-list.patch Jean Delvare
[not found] ` <20080118111401.7ffdccc5-ig7AzVSIIG7kN2dkZ6Wm7A@public.gmane.org>
2008-01-18 10:30 ` i2c-remove-redundant-i2c_client-list.patch David Brownell
2008-01-14 22:42 ` i2c-remove-redundant-i2c_client-list.patch David Brownell
2008-01-17 19:35 ` i2c-remove-redundant-i2c_client-list.patch David Brownell
[not found] ` <200801171135.45797.david-b-yBeKhBN/0LDR7s880joybQ@public.gmane.org>
2008-01-17 19:59 ` i2c-remove-redundant-i2c_client-list.patch David Brownell
[not found] ` <200801171159.00291.david-b-yBeKhBN/0LDR7s880joybQ@public.gmane.org>
2008-01-18 9:32 ` i2c-remove-redundant-i2c_client-list.patch Jean Delvare
[not found] ` <20080118103209.4b92ac76-ig7AzVSIIG7kN2dkZ6Wm7A@public.gmane.org>
2008-01-18 10:16 ` i2c-remove-redundant-i2c_client-list.patch David Brownell
[not found] ` <200801180216.22363.david-b-yBeKhBN/0LDR7s880joybQ@public.gmane.org>
2008-01-18 12:10 ` i2c-remove-redundant-i2c_client-list.patch Jean Delvare
2008-01-08 18:52 ` i2c-remove-redundant-i2c_client-list.patch David Brownell
[not found] ` <200801081052.31413.david-b-yBeKhBN/0LDR7s880joybQ@public.gmane.org>
2008-01-08 19:57 ` i2c-remove-redundant-i2c_client-list.patch Jean Delvare
2008-01-09 16:09 ` i2c-remove-redundant-i2c_client-list.patch Jean Delvare
2008-01-06 19:43 ` i2c-remove-redundant-i2c_client-list.patch David Brownell
[not found] ` <200801061143.34020.david-b-yBeKhBN/0LDR7s880joybQ@public.gmane.org>
2008-01-08 14:21 ` i2c-remove-redundant-i2c_client-list.patch Jean Delvare
2008-01-17 22:24 ` [patch 2.6.24-rc5-git] add i2c_new_dummy() utility David Brownell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20080117230228.02b22bad@hyperion.delvare \
--to=khali-puyad+kwke1g9huczpvpmw@public.gmane.org \
--cc=david-b-yBeKhBN/0LDR7s880joybQ@public.gmane.org \
--cc=greg-U8xfFu+wG4EAvxtiuMwx3w@public.gmane.org \
--cc=i2c-GZX6beZjE8VD60Wz+7aTrA@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox