From mboxrd@z Thu Jan 1 00:00:00 1970 From: Jean Delvare Subject: Re: [PATCH] Add driver for AD7414 i2c temperature sensor Date: Tue, 12 Feb 2008 17:25:42 +0100 Message-ID: <20080212172542.210f4a78@hyperion.delvare> References: Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: i2c-bounces-GZX6beZjE8VD60Wz+7aTrA@public.gmane.org Errors-To: i2c-bounces-GZX6beZjE8VD60Wz+7aTrA@public.gmane.org To: "Edelhaeuser, Frank" Cc: i2c-GZX6beZjE8VD60Wz+7aTrA@public.gmane.org List-Id: linux-i2c@vger.kernel.org Hi Frank, On Fri, 1 Feb 2008 05:34:14 -0800, Edelhaeuser, Frank wrote: > Signed-off-by: Frank Edelhaeuser > --- > diff -Nur a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig > --- a/drivers/hwmon/Kconfig 2007-11-11 21:49:02.000000000 +0100 > +++ b/drivers/hwmon/Kconfig 2008-02-01 11:54:48.000000000 +0100 > @@ -57,6 +57,16 @@ > This driver can also be built as a module. If so, the module > will be called abituguru3. > > +config SENSORS_AD7414 > + tristate "Analog Devices AD7414" > + depends on I2C && EXPERIMENTAL > + help > + If you say yes here you get support for the Analog Devices > + AD7414 temperature monitoring chip. > + > + This driver can also be built as a module. If so, the module > + will be called ad7414. > + > config SENSORS_AD7418 > tristate "Analog Devices AD7416, AD7417 and AD7418" > depends on I2C && EXPERIMENTAL --> lm-sensors list, please. -- Jean Delvare _______________________________________________ i2c mailing list i2c-GZX6beZjE8VD60Wz+7aTrA@public.gmane.org http://lists.lm-sensors.org/mailman/listinfo/i2c