From: Jean Delvare <khali-PUYAD+kWke1g9hUCZPvPmw@public.gmane.org>
To: Wolfram Sang <w.sang-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
Cc: eric miao <eric.miao-eYqpPyKDWXRBDgjK7y7TUQ@public.gmane.org>,
i2c-GZX6beZjE8VD60Wz+7aTrA@public.gmane.org
Subject: Re: [patch 6/6] Minor fixes for pxa-driver
Date: Wed, 13 Feb 2008 09:58:39 +0100 [thread overview]
Message-ID: <20080213095839.5d99d48a@hyperion.delvare> (raw)
In-Reply-To: <20080121143659.089906703-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
Hi Wolfram,
On Mon, 21 Jan 2008 15:20:16 +0100, w.sang-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org wrote:
> While working on the PCA9564-platform driver, I sometimes had a glimpse at the
> pxa-driver. I found some suspicious places, and this patch contains my
> suggestions. Note: They are not tested, due to no hardware.
Looks good. I've added a couple more fixes, resulting patch is below.
As I don't have hardware for testing either, I would appreciate if
someone with a PXA board could test it and confirm that it causes no
regression. Mike? Eric? I plan to send this patch to Linus for 2.6.25
(i.e. quickly.)
From: Wolfram Sang <w.sang-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
Subject: i2c-pxa: Misc fixes
While working on the PCA9564-platform driver, I sometimes had a glimpse at the
pxa-driver. I found some suspicious places, and this patch contains my
suggestions. Note: They are not tested, due to no hardware.
[JD: Some more fixes.]
Signed-off-by: Wolfram Sang <w.sang-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
Signed-off-by: Jean Delvare <khali-PUYAD+kWke1g9hUCZPvPmw@public.gmane.org>
---
drivers/i2c/busses/i2c-pxa.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
--- linux-2.6.25-rc1.orig/drivers/i2c/busses/i2c-pxa.c 2008-02-13 09:51:09.000000000 +0100
+++ linux-2.6.25-rc1/drivers/i2c/busses/i2c-pxa.c 2008-02-13 09:57:33.000000000 +0100
@@ -997,7 +997,14 @@ static int i2c_pxa_probe(struct platform
spin_lock_init(&i2c->lock);
init_waitqueue_head(&i2c->wait);
- sprintf(i2c->adap.name, "pxa_i2c-i2c.%u", dev->id);
+ /*
+ * If "dev->id" is negative we consider it as zero.
+ * The reason to do so is to avoid sysfs names that only make
+ * sense when there are multiple adapters.
+ */
+ i2c->adap.nr = dev->id != -1 ? dev->id : 0;
+ snprintf(i2c->adap.name, sizeof(i2c->adap.name), "pxa_i2c-i2c.%u",
+ i2c->adap.nr);
i2c->clk = clk_get(&dev->dev, "I2CCLK");
if (IS_ERR(i2c->clk)) {
@@ -1048,13 +1055,6 @@ static int i2c_pxa_probe(struct platform
i2c->adap.algo_data = i2c;
i2c->adap.dev.parent = &dev->dev;
- /*
- * If "dev->id" is negative we consider it as zero.
- * The reason to do so is to avoid sysfs names that only make
- * sense when there are multiple adapters.
- */
- i2c->adap.nr = dev->id != -1 ? dev->id : 0;
-
ret = i2c_add_numbered_adapter(&i2c->adap);
if (ret < 0) {
printk(KERN_INFO "I2C: Failed to add bus\n");
@@ -1078,6 +1078,7 @@ eadapt:
ereqirq:
clk_disable(i2c->clk);
i2c_pxa_disable(dev);
+ iounmap(i2c->reg_base);
eremap:
clk_put(i2c->clk);
eclk:
@@ -1087,7 +1088,7 @@ emalloc:
return ret;
}
-static int i2c_pxa_remove(struct platform_device *dev)
+static int __devexit i2c_pxa_remove(struct platform_device *dev)
{
struct pxa_i2c *i2c = platform_get_drvdata(dev);
@@ -1101,6 +1102,7 @@ static int i2c_pxa_remove(struct platfor
clk_put(i2c->clk);
i2c_pxa_disable(dev);
+ iounmap(i2c->reg_base);
release_mem_region(i2c->iobase, i2c->iosize);
kfree(i2c);
@@ -1109,9 +1111,10 @@ static int i2c_pxa_remove(struct platfor
static struct platform_driver i2c_pxa_driver = {
.probe = i2c_pxa_probe,
- .remove = i2c_pxa_remove,
+ .remove = __devexit_p(i2c_pxa_remove),
.driver = {
.name = "pxa2xx-i2c",
+ .owner = THIS_DRIVER,
},
};
@@ -1120,9 +1123,9 @@ static int __init i2c_adap_pxa_init(void
return platform_driver_register(&i2c_pxa_driver);
}
-static void i2c_adap_pxa_exit(void)
+static void __exit i2c_adap_pxa_exit(void)
{
- return platform_driver_unregister(&i2c_pxa_driver);
+ platform_driver_unregister(&i2c_pxa_driver);
}
MODULE_LICENSE("GPL");
--
Jean Delvare
_______________________________________________
i2c mailing list
i2c-GZX6beZjE8VD60Wz+7aTrA@public.gmane.org
http://lists.lm-sensors.org/mailman/listinfo/i2c
next prev parent reply other threads:[~2008-02-13 8:58 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-01-21 14:20 [patch 0/6] PCA9564-platform driver w.sang-bIcnvbaLZ9MEGnE8C9+IrQ
2008-01-21 14:20 ` [patch 1/6] Removing trailing whitespaces from pca-algorithm w.sang-bIcnvbaLZ9MEGnE8C9+IrQ
[not found] ` <20080121143657.041235373-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
2008-01-23 14:21 ` Jean Delvare
2008-01-21 14:20 ` [patch 2/6] Extension of pca-algorithm w.sang-bIcnvbaLZ9MEGnE8C9+IrQ
[not found] ` <20080121143657.455317984-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
2008-01-23 19:52 ` Jean Delvare
[not found] ` <20080123205241.3e1235e7-ig7AzVSIIG7kN2dkZ6Wm7A@public.gmane.org>
2008-01-24 13:00 ` Wolfram Sang
2008-01-21 14:20 ` [patch 3/6] Minor typos in i2c/algos/Kconfig w.sang-bIcnvbaLZ9MEGnE8C9+IrQ
[not found] ` <20080121143657.830988061-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
2008-01-23 20:08 ` Jean Delvare
[not found] ` <20080123210840.3f4a78e6-ig7AzVSIIG7kN2dkZ6Wm7A@public.gmane.org>
2008-01-24 13:47 ` Wolfram Sang
2008-02-13 9:00 ` Jean Delvare
2008-01-21 14:20 ` [patch 4/6] Platform driver for the PCA9564 w.sang-bIcnvbaLZ9MEGnE8C9+IrQ
2008-01-21 14:20 ` [patch 5/6] pca-isa driver uses the new pca-algorithm w.sang-bIcnvbaLZ9MEGnE8C9+IrQ
[not found] ` <20080121143658.662633756-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
2008-01-24 11:00 ` Jean Delvare
[not found] ` <20080124120044.4052c351-ig7AzVSIIG7kN2dkZ6Wm7A@public.gmane.org>
2008-01-24 14:01 ` Wolfram Sang
2008-01-21 14:20 ` [patch 6/6] Minor fixes for pxa-driver w.sang-bIcnvbaLZ9MEGnE8C9+IrQ
[not found] ` <20080121143659.089906703-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
2008-02-13 8:58 ` Jean Delvare [this message]
2008-02-13 9:22 ` Eric Miao
[not found] ` <E913911567467945BBEB9277E27868B083D61E-3TKN+kxLw8+HXkj8w7BxOhL4W9x8LtSr@public.gmane.org>
2008-02-13 10:08 ` Jean Delvare
[not found] ` <20080213095839.5d99d48a-ig7AzVSIIG7kN2dkZ6Wm7A@public.gmane.org>
2008-02-13 11:57 ` Mike Rapoport
[not found] ` <47B2DB21.7020404-UTxiZqZC01RS1MOuV/RT9w@public.gmane.org>
2008-02-13 13:11 ` Jean Delvare
2008-02-14 2:23 ` Eric Miao
2008-02-14 18:55 ` Wolfram Sang
2008-02-14 22:11 ` Jean Delvare
2008-02-15 0:43 ` Eric Miao
2008-02-23 21:49 ` Jean Delvare
[not found] ` <20080121142010.988419876-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
2008-01-23 9:33 ` [patch 0/6] PCA9564-platform driver Wolfram Sang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20080213095839.5d99d48a@hyperion.delvare \
--to=khali-puyad+kwke1g9huczpvpmw@public.gmane.org \
--cc=eric.miao-eYqpPyKDWXRBDgjK7y7TUQ@public.gmane.org \
--cc=i2c-GZX6beZjE8VD60Wz+7aTrA@public.gmane.org \
--cc=w.sang-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox