From mboxrd@z Thu Jan 1 00:00:00 1970 From: Jean Delvare Subject: Re: [PATCH] Convert pfc8563 i2c driver from old style to new style Date: Tue, 19 Feb 2008 16:24:15 +0100 Message-ID: <20080219162415.601c7efe@hyperion.delvare> References: <20080121200901.15517.30253.stgit@terra.home> <20080219161020.61f7ec10@hyperion.delvare> <9e4733910802190717g3a4b6ddejbd180a32d7dfae47@mail.gmail.com> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <9e4733910802190717g3a4b6ddejbd180a32d7dfae47-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org> List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: i2c-bounces-GZX6beZjE8VD60Wz+7aTrA@public.gmane.org Errors-To: i2c-bounces-GZX6beZjE8VD60Wz+7aTrA@public.gmane.org To: Jon Smirl Cc: linuxppc-dev-mnsaURCQ41sdnm+yROfE0A@public.gmane.org, Alessandro Zummo , i2c-GZX6beZjE8VD60Wz+7aTrA@public.gmane.org, Clemens Koller List-Id: linux-i2c@vger.kernel.org On Tue, 19 Feb 2008 10:17:43 -0500, Jon Smirl wrote: > On 2/19/08, Jean Delvare wrote: > > Hi Jon, > > > > On Mon, 21 Jan 2008 15:09:01 -0500, Jon Smirl wrote: > > > Convert pfc8563 i2c driver from old style to new style. > > Let's just forget about this patch until the dynamic module loading > support goes into the base. Why? I don't see the rationale. New-style drivers are good even without dynamic module loading. > The Phytec PCM030 mpc5200 board uses this chip. They are staying out > of tree because they've integrated real-time support which is not in > mainline yet. -- Jean Delvare _______________________________________________ i2c mailing list i2c-GZX6beZjE8VD60Wz+7aTrA@public.gmane.org http://lists.lm-sensors.org/mailman/listinfo/i2c