From mboxrd@z Thu Jan 1 00:00:00 1970 From: Jean Delvare Subject: Re: [patch 6/6] Minor fixes for pxa-driver Date: Sat, 23 Feb 2008 22:49:53 +0100 Message-ID: <20080223224953.00be842c@hyperion.delvare> References: <20080121142010.988419876@pengutronix.de> <20080121143659.089906703@pengutronix.de> <20080213095839.5d99d48a@hyperion.delvare> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <20080213095839.5d99d48a-ig7AzVSIIG7kN2dkZ6Wm7A@public.gmane.org> List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: i2c-bounces-GZX6beZjE8VD60Wz+7aTrA@public.gmane.org Errors-To: i2c-bounces-GZX6beZjE8VD60Wz+7aTrA@public.gmane.org To: i2c-GZX6beZjE8VD60Wz+7aTrA@public.gmane.org Cc: David Brownell , eric miao List-Id: linux-i2c@vger.kernel.org Patch updated after receiving this comment (in private) from David Brownell: > i2c-pxa-misc-fixes ... should use "__exit" and "__exit_p" instead > of "__devexit" and "__devexit_p" on the remove() function. > The PXA platform bus is normal: it's not hot-unpluggable. * * * * * While working on the PCA9564-platform driver, I sometimes had a glimpse at the pxa-driver. I found some suspicious places, and this patch contains my suggestions. Note: They are not tested, due to no hardware. [JD: Some more fixes.] Signed-off-by: Wolfram Sang Signed-off-by: Jean Delvare Tested-by: Mike Rapoport Tested-by: Eric Miao --- drivers/i2c/busses/i2c-pxa.c | 25 ++++++++++++++----------- 1 file changed, 14 insertions(+), 11 deletions(-) --- linux-2.6.25-rc2.orig/drivers/i2c/busses/i2c-pxa.c 2008-02-23 18:18:46.000000000 +0100 +++ linux-2.6.25-rc2/drivers/i2c/busses/i2c-pxa.c 2008-02-23 22:42:54.000000000 +0100 @@ -999,7 +999,14 @@ static int i2c_pxa_probe(struct platform spin_lock_init(&i2c->lock); init_waitqueue_head(&i2c->wait); - sprintf(i2c->adap.name, "pxa_i2c-i2c.%u", dev->id); + /* + * If "dev->id" is negative we consider it as zero. + * The reason to do so is to avoid sysfs names that only make + * sense when there are multiple adapters. + */ + i2c->adap.nr = dev->id != -1 ? dev->id : 0; + snprintf(i2c->adap.name, sizeof(i2c->adap.name), "pxa_i2c-i2c.%u", + i2c->adap.nr); i2c->clk = clk_get(&dev->dev, "I2CCLK"); if (IS_ERR(i2c->clk)) { @@ -1050,13 +1057,6 @@ static int i2c_pxa_probe(struct platform i2c->adap.algo_data = i2c; i2c->adap.dev.parent = &dev->dev; - /* - * If "dev->id" is negative we consider it as zero. - * The reason to do so is to avoid sysfs names that only make - * sense when there are multiple adapters. - */ - i2c->adap.nr = dev->id != -1 ? dev->id : 0; - ret = i2c_add_numbered_adapter(&i2c->adap); if (ret < 0) { printk(KERN_INFO "I2C: Failed to add bus\n"); @@ -1080,6 +1080,7 @@ eadapt: ereqirq: clk_disable(i2c->clk); i2c_pxa_disable(dev); + iounmap(i2c->reg_base); eremap: clk_put(i2c->clk); eclk: @@ -1089,7 +1090,7 @@ emalloc: return ret; } -static int i2c_pxa_remove(struct platform_device *dev) +static int __exit i2c_pxa_remove(struct platform_device *dev) { struct pxa_i2c *i2c = platform_get_drvdata(dev); @@ -1103,6 +1104,7 @@ static int i2c_pxa_remove(struct platfor clk_put(i2c->clk); i2c_pxa_disable(dev); + iounmap(i2c->reg_base); release_mem_region(i2c->iobase, i2c->iosize); kfree(i2c); @@ -1111,9 +1113,10 @@ static int i2c_pxa_remove(struct platfor static struct platform_driver i2c_pxa_driver = { .probe = i2c_pxa_probe, - .remove = i2c_pxa_remove, + .remove = __exit_p(i2c_pxa_remove), .driver = { .name = "pxa2xx-i2c", + .owner = THIS_MODULE, }, }; @@ -1122,7 +1125,7 @@ static int __init i2c_adap_pxa_init(void return platform_driver_register(&i2c_pxa_driver); } -static void i2c_adap_pxa_exit(void) +static void __exit i2c_adap_pxa_exit(void) { platform_driver_unregister(&i2c_pxa_driver); } -- Jean Delvare _______________________________________________ i2c mailing list i2c-GZX6beZjE8VD60Wz+7aTrA@public.gmane.org http://lists.lm-sensors.org/mailman/listinfo/i2c