From mboxrd@z Thu Jan 1 00:00:00 1970 From: Tony Lindgren Subject: Re: [patch 2.6.25-rc3] tps65010 driver converts to gpiolib Date: Tue, 4 Mar 2008 17:43:02 +0200 Message-ID: <20080304154301.GN31006@atomide.com> References: <20080228220729.9B01C28E0DB@adsl-69-226-248-13.dsl.pltn13.pacbell.net> <20080303140539.GB31006@atomide.com> <200803030934.37376.david-b@pacbell.net> <20080303231818.2f03d5d6@hyperion.delvare> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: Content-Disposition: inline In-Reply-To: <20080303231818.2f03d5d6-ig7AzVSIIG7kN2dkZ6Wm7A@public.gmane.org> List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: i2c-bounces-GZX6beZjE8VD60Wz+7aTrA@public.gmane.org Errors-To: i2c-bounces-GZX6beZjE8VD60Wz+7aTrA@public.gmane.org To: Jean Delvare Cc: David Brownell , linux-omap-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, i2c-GZX6beZjE8VD60Wz+7aTrA@public.gmane.org List-Id: linux-i2c@vger.kernel.org * Jean Delvare [080304 00:50]: > On Mon, 3 Mar 2008 09:34:37 -0800, David Brownell wrote: > > On Monday 03 March 2008, Tony Lindgren wrote: > > > * David Brownell [080229 00:12]: > > > > Make the tps65010 driver use gpiolib to expose its GPIOs. > > > > > > > > Signed-off-by: David Brownell > > > > --- > > > > NOTE: this depends on the patch to convert OMAP over to gpiolib. > > > > Also, commit e27a93a944a5ba6a0112750c8243abba86d56e94 broke both > > > > H2 and H3 support ... that seems to be a 2.6.25-rc regression. > > > > > > Pushing to linux-omap & adding to omap-upstream for post 2.6.25. > > > > That seems best to me, although Jean should probably ack this... > > Jean is too busy these days to even look at the patch... but I trust > you, if you and Tony are happy with the patch, I am totally fine with > it going upstream through the omap tree. Well looks like I accidentally added this to omap-upstream although it's I2C only patch.. But considering that it depends on omap gpiolib patches, pushing this via omap-upstream sounds like a good idea to me :) Will keep Jean Cc'd. Cheers, Tony _______________________________________________ i2c mailing list i2c-GZX6beZjE8VD60Wz+7aTrA@public.gmane.org http://lists.lm-sensors.org/mailman/listinfo/i2c