From: Jean Delvare <khali-PUYAD+kWke1g9hUCZPvPmw@public.gmane.org>
To: Bryan Wu <cooloney-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
Cc: i2c-GZX6beZjE8VD60Wz+7aTrA@public.gmane.org
Subject: Re: [PATCH 0/6] Blackfin I2C TWI driver updates
Date: Thu, 13 Mar 2008 13:03:32 +0100 [thread overview]
Message-ID: <20080313130332.46af8228@hyperion.delvare> (raw)
In-Reply-To: <386072610803121907y499903ban37456d06d36a07a8-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
On Thu, 13 Mar 2008 10:07:07 +0800, Bryan Wu wrote:
> Actually, I plan to send out these for 2.6.26 at first. But found
> following BF54x compiling error:
>
> --
> drivers/i2c/busses/i2c-bfin-twi.c: In function 'bfin_twi_handle_interrupt':
> drivers/i2c/busses/i2c-bfin-twi.c:67: error: implicit declaration of
> function 'bfin_read_TWI_INT_STAT'
> drivers/i2c/busses/i2c-bfin-twi.c:68: error: implicit declaration of
> function 'bfin_read_TWI_MASTER_STAT'
> drivers/i2c/busses/i2c-bfin-twi.c:73: error: implicit declaration of
> function 'bfin_write_TWI_XMT_DATA8'
> drivers/i2c/busses/i2c-bfin-twi.c:80: error: implicit declaration of
> function 'bfin_write_TWI_MASTER_CTL'
> drivers/i2c/busses/i2c-bfin-twi.c:80: error: implicit declaration of
> function 'bfin_read_TWI_MASTER_CTL'
> drivers/i2c/busses/i2c-bfin-twi.c:87: error: implicit declaration of
> function 'bfin_write_TWI_INT_STAT'
> drivers/i2c/busses/i2c-bfin-twi.c:93: error: implicit declaration of
> function 'bfin_read_TWI_RCV_DATA8'
> drivers/i2c/busses/i2c-bfin-twi.c:118: error: implicit declaration of
> function 'bfin_write_TWI_INT_MASK'
> drivers/i2c/busses/i2c-bfin-twi.c:119: error: implicit declaration of
> function 'bfin_write_TWI_MASTER_STAT'
> drivers/i2c/busses/i2c-bfin-twi.c: In function 'bfin_twi_master_xfer':
> drivers/i2c/busses/i2c-bfin-twi.c:227: error: implicit declaration of
> function 'bfin_read_TWI_CONTROL'
> drivers/i2c/busses/i2c-bfin-twi.c:251: error: implicit declaration of
> function 'bfin_write_TWI_MASTER_ADDR'
> drivers/i2c/busses/i2c-bfin-twi.c:256: error: implicit declaration of
> function 'bfin_write_TWI_FIFO_CTL'
> drivers/i2c/busses/i2c-bfin-twi.c: In function 'i2c_bfin_twi_suspend':
> drivers/i2c/busses/i2c-bfin-twi.c:520: error: implicit declaration of
> function 'bfin_write_TWI_CONTROL'
> drivers/i2c/busses/i2c-bfin-twi.c: In function 'i2c_bfin_twi_probe':
> drivers/i2c/busses/i2c-bfin-twi.c:545: error: 'IRQ_TWI' undeclared
> (first use in this function)
> drivers/i2c/busses/i2c-bfin-twi.c:545: error: (Each undeclared
> identifier is reported only once
> drivers/i2c/busses/i2c-bfin-twi.c:545: error: for each function it appears in.)
> drivers/i2c/busses/i2c-bfin-twi.c:572: error: implicit declaration of
> function 'bfin_write_TWI_CLKDIV'
> make[3]: *** [drivers/i2c/busses/i2c-bfin-twi.o] Error 1
> make[2]: *** [drivers/i2c/busses] Error 2
> make[1]: *** [drivers/i2c] Error 2
> make: *** [drivers] Error 2
> --
>
> But as you said, it is -rc5 now. If these can be merged in 2.6.26, it
> is OK for me.
Maybe you can provide a fix for just this build problem? This I would
possibly push into 2.6.25, and then the rest of your updates go on top
of it for 2.6.26.
--
Jean Delvare
_______________________________________________
i2c mailing list
i2c-GZX6beZjE8VD60Wz+7aTrA@public.gmane.org
http://lists.lm-sensors.org/mailman/listinfo/i2c
prev parent reply other threads:[~2008-03-13 12:03 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-03-12 16:25 [PATCH 0/6] Blackfin I2C TWI driver updates Bryan Wu
[not found] ` <1205479360-25240-1-git-send-email-cooloney-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
2008-03-12 18:37 ` Jean Delvare
[not found] ` <20080312193718.1aa86caf-ig7AzVSIIG7kN2dkZ6Wm7A@public.gmane.org>
2008-03-13 2:07 ` Bryan Wu
[not found] ` <386072610803121907y499903ban37456d06d36a07a8-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2008-03-13 5:43 ` Kalle Pokki
[not found] ` <Pine.LNX.4.64.0803130726410.26435-er0LZAA46r2WwDxiJSwuDc1vFkv34tBQrE5yTffgRl4@public.gmane.org>
2008-03-13 7:50 ` Bryan Wu
[not found] ` <386072610803130050j47f2659bpbf53199c7dec4916-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2008-03-13 14:34 ` Jean Delvare
[not found] ` <20080313153412.6c978e24-ig7AzVSIIG7kN2dkZ6Wm7A@public.gmane.org>
2008-03-13 16:25 ` Bryan Wu
[not found] ` <386072610803130925r3353032kc4e47d4a0948dba4-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2008-03-13 17:13 ` Jean Delvare
2008-03-13 12:03 ` Jean Delvare [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20080313130332.46af8228@hyperion.delvare \
--to=khali-puyad+kwke1g9huczpvpmw@public.gmane.org \
--cc=cooloney-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=i2c-GZX6beZjE8VD60Wz+7aTrA@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox