From: Tony Lindgren <tony@atomide.com>
To: Jean Delvare <khali@linux-fr.org>
Cc: i2c@lm-sensors.org, linux-omap@vger.kernel.org
Subject: I2C: Fix unhandled fault in i2c-omap controller
Date: Thu, 13 Mar 2008 17:51:24 +0200 [thread overview]
Message-ID: <20080313155123.GI11653@atomide.com> (raw)
[-- Attachment #1: Type: text/plain, Size: 106 bytes --]
Hi Jean,
Here's an omap I2C fix that would be nice to get into 2.6.25 if still
possible.
Regards,
Tony
[-- Attachment #2: i2c-clock-race --]
[-- Type: text/plain, Size: 4083 bytes --]
commit 8e4f19286e68d38d589451ad2a10545f2c40032d
Author: Tony Lindgren <tony@atomide.com>
Date: Mon Feb 18 20:16:00 2008 -0800
I2C: Fix unhandled fault in i2c-omap controller
If an I2C interrupt happens between disabling interface clock
and functional clock, the interrupt handler will produce an
external abort on non-linefetch error when trying to access
driver registers while interface clock is disabled.
This patch fixes the problem by saving and disabling i2c-omap
interrupt before turning off the clocks. Also disable functional
clock before the interface clock as suggested by Paul Walmsley.
Patch also renames enable/disable_clocks functions to unidle/idle
functions. Note that the driver is currently not taking advantage
of the idle interrupts. To use the idle interrupts, driver would
have to enable interface clock based on the idle interrupt
and dev->idle flag.
Cc: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c
index da66397..862dd69 100644
--- a/drivers/i2c/busses/i2c-omap.c
+++ b/drivers/i2c/busses/i2c-omap.c
@@ -128,6 +128,8 @@ struct omap_i2c_dev {
size_t buf_len;
struct i2c_adapter adapter;
unsigned rev1:1;
+ unsigned idle:1;
+ u16 iestate; /* Saved interrupt register */
};
static inline void omap_i2c_write_reg(struct omap_i2c_dev *i2c_dev,
@@ -174,18 +176,30 @@ static void omap_i2c_put_clocks(struct omap_i2c_dev *dev)
}
}
-static void omap_i2c_enable_clocks(struct omap_i2c_dev *dev)
+static void omap_i2c_unidle(struct omap_i2c_dev *dev)
{
if (dev->iclk != NULL)
clk_enable(dev->iclk);
clk_enable(dev->fclk);
+ if (dev->iestate)
+ omap_i2c_write_reg(dev, OMAP_I2C_IE_REG, dev->iestate);
+ dev->idle = 0;
}
-static void omap_i2c_disable_clocks(struct omap_i2c_dev *dev)
+static void omap_i2c_idle(struct omap_i2c_dev *dev)
{
+ u16 iv;
+
+ dev->idle = 1;
+ dev->iestate = omap_i2c_read_reg(dev, OMAP_I2C_IE_REG);
+ omap_i2c_write_reg(dev, OMAP_I2C_IE_REG, 0);
+ if (dev->rev1)
+ iv = omap_i2c_read_reg(dev, OMAP_I2C_IV_REG);
+ else
+ omap_i2c_write_reg(dev, OMAP_I2C_STAT_REG, dev->iestate);
+ clk_disable(dev->fclk);
if (dev->iclk != NULL)
clk_disable(dev->iclk);
- clk_disable(dev->fclk);
}
static int omap_i2c_init(struct omap_i2c_dev *dev)
@@ -360,7 +374,7 @@ omap_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num)
int i;
int r;
- omap_i2c_enable_clocks(dev);
+ omap_i2c_unidle(dev);
if ((r = omap_i2c_wait_for_bb(dev)) < 0)
goto out;
@@ -374,7 +388,7 @@ omap_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num)
if (r == 0)
r = num;
out:
- omap_i2c_disable_clocks(dev);
+ omap_i2c_idle(dev);
return r;
}
@@ -403,6 +417,9 @@ omap_i2c_rev1_isr(int this_irq, void *dev_id)
struct omap_i2c_dev *dev = dev_id;
u16 iv, w;
+ if (dev->idle)
+ return IRQ_NONE;
+
iv = omap_i2c_read_reg(dev, OMAP_I2C_IV_REG);
switch (iv) {
case 0x00: /* None */
@@ -457,6 +474,9 @@ omap_i2c_isr(int this_irq, void *dev_id)
u16 stat, w;
int count = 0;
+ if (dev->idle)
+ return IRQ_NONE;
+
bits = omap_i2c_read_reg(dev, OMAP_I2C_IE_REG);
while ((stat = (omap_i2c_read_reg(dev, OMAP_I2C_STAT_REG))) & bits) {
dev_dbg(dev->dev, "IRQ (ISR = 0x%04x)\n", stat);
@@ -575,7 +595,7 @@ omap_i2c_probe(struct platform_device *pdev)
if ((r = omap_i2c_get_clocks(dev)) != 0)
goto err_free_mem;
- omap_i2c_enable_clocks(dev);
+ omap_i2c_unidle(dev);
if (cpu_is_omap15xx())
dev->rev1 = omap_i2c_read_reg(dev, OMAP_I2C_REV_REG) < 0x20;
@@ -610,7 +630,7 @@ omap_i2c_probe(struct platform_device *pdev)
goto err_free_irq;
}
- omap_i2c_disable_clocks(dev);
+ omap_i2c_idle(dev);
return 0;
@@ -618,7 +638,7 @@ err_free_irq:
free_irq(dev->irq, dev);
err_unuse_clocks:
omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, 0);
- omap_i2c_disable_clocks(dev);
+ omap_i2c_idle(dev);
omap_i2c_put_clocks(dev);
err_free_mem:
platform_set_drvdata(pdev, NULL);
next reply other threads:[~2008-03-13 15:51 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-03-13 15:51 Tony Lindgren [this message]
[not found] ` <20080313155123.GI11653-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org>
2008-03-14 15:53 ` I2C: Fix unhandled fault in i2c-omap controller Jean Delvare
2008-03-17 6:39 ` Tony Lindgren
2008-03-14 17:52 ` Jean Delvare
2008-03-17 6:46 ` Tony Lindgren
2008-03-17 7:19 ` [PATCH] I2C: Fix unhandled fault in i2c-omap controller, take #2 Tony Lindgren
2008-03-17 8:07 ` David Brownell
[not found] ` <20080317071949.GP11653-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org>
2008-03-17 11:05 ` Jean Delvare
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20080313155123.GI11653@atomide.com \
--to=tony@atomide.com \
--cc=i2c@lm-sensors.org \
--cc=khali@linux-fr.org \
--cc=linux-omap@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox