From: Till Harbaum / Lists <lists-RcHadlBFbzVAfugRpC6u6w@public.gmane.org>
To: Jean Delvare <khali-PUYAD+kWke1g9hUCZPvPmw@public.gmane.org>
Cc: i2c-GZX6beZjE8VD60Wz+7aTrA@public.gmane.org
Subject: Re: [PATCH] New VID/PID pair for i2c-tiny-usb
Date: Sun, 30 Mar 2008 19:55:15 +0100 [thread overview]
Message-ID: <200803302055.15948.lists@harbaum.org> (raw)
In-Reply-To: <20080330143107.1575e1bf-ig7AzVSIIG7kN2dkZ6Wm7A@public.gmane.org>
[-- Attachment #1: Type: text/plain, Size: 971 bytes --]
Hi,
Am Sonntag 30 März 2008 schrieb Jean Delvare:
> > Does this make sense?
>
> Yes it does, thanks for clarifying. Please send an updated patch and
> I'll apply it.
Please find a new patch attached.
> Do you plan to phase out the old VID/PID pair? If so, I'll have to send
> you back my i2c-tiny-usb device for a firmware update.
Nothing will change for people using the old vid/pid pair as the driver still
supports that and i don't think there's a reason to also remove
the old vid/pid pair from the driver. But since you don't have the latest
firmware, you might of course return your device anyway to get it updated.
It'll then be detected correctly if it's plugged in at boot time.
Till
So here we go:
This patch adds support for the EZPrototypes USB vid/pid pair used in later
i2c-tiny-usb firmware versions (avrusb v1.06 and up, usbtiny v2.06 and up).
Signed-off-by: Till Harbaum <Till-zicpKgigMvpAfugRpC6u6w@public.gmane.org>
[-- Attachment #2: i2c-tiny-usb-ezprototypes.patch --]
[-- Type: text/x-diff, Size: 910 bytes --]
--- linux-2.6.24.3.orig/drivers/i2c/busses/i2c-tiny-usb.c 2008-02-26 01:20:20.000000000 +0100
+++ linux-2.6.24.3/drivers/i2c/busses/i2c-tiny-usb.c 2008-03-30 20:47:46.000000000 +0200
@@ -131,11 +131,15 @@
/* ----- begin of usb layer ---------------------------------------------- */
-/* The usb i2c interface uses a vid/pid pair donated by */
-/* Future Technology Devices International Ltd. */
+/*
+ * Initially the usb i2c interface uses a vid/pid pair donated by
+ * Future Technology Devices International Ltd., later a pair was
+ * bought from EZPrototypes
+ */
static struct usb_device_id i2c_tiny_usb_table [] = {
- { USB_DEVICE(0x0403, 0xc631) },
- { } /* Terminating entry */
+ { USB_DEVICE(0x0403, 0xc631) }, /* FTDI */
+ { USB_DEVICE(0x1c40, 0x0534) }, /* EZPrototypes */
+ { } /* Terminating entry */
};
MODULE_DEVICE_TABLE(usb, i2c_tiny_usb_table);
[-- Attachment #3: Type: text/plain, Size: 157 bytes --]
_______________________________________________
i2c mailing list
i2c-GZX6beZjE8VD60Wz+7aTrA@public.gmane.org
http://lists.lm-sensors.org/mailman/listinfo/i2c
next prev parent reply other threads:[~2008-03-30 18:55 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-03-24 9:42 [PATCH] New VID/PID pair for i2c-tiny-usb Till Harbaum / Lists
[not found] ` <200803241042.31263.lists-RcHadlBFbzVAfugRpC6u6w@public.gmane.org>
2008-03-26 14:44 ` Jean Delvare
[not found] ` <20080326154415.2981961a-ig7AzVSIIG7kN2dkZ6Wm7A@public.gmane.org>
2008-03-27 19:47 ` Till Harbaum / Lists
[not found] ` <200803272047.21505.lists-RcHadlBFbzVAfugRpC6u6w@public.gmane.org>
2008-03-30 12:31 ` Jean Delvare
[not found] ` <20080330143107.1575e1bf-ig7AzVSIIG7kN2dkZ6Wm7A@public.gmane.org>
2008-03-30 18:55 ` Till Harbaum / Lists [this message]
[not found] ` <200803302055.15948.lists-RcHadlBFbzVAfugRpC6u6w@public.gmane.org>
2008-03-30 19:53 ` Jean Delvare
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200803302055.15948.lists@harbaum.org \
--to=lists-rchadlbfbzvafugrpc6u6w@public.gmane.org \
--cc=i2c-GZX6beZjE8VD60Wz+7aTrA@public.gmane.org \
--cc=khali-PUYAD+kWke1g9hUCZPvPmw@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox