From mboxrd@z Thu Jan 1 00:00:00 1970 From: Jean Delvare Subject: Re: [RFC][PATCH 2/4] RTC: SWARM I2C board initialization Date: Wed, 7 May 2008 09:05:14 +0200 Message-ID: <20080507090514.3a86cf4b@hyperion.delvare> References: Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: Sender: linux-kernel-owner@vger.kernel.org To: "Maciej W. Rozycki" Cc: Alessandro Zummo , Ralf Baechle , Thomas Gleixner , Andrew Morton , rtc-linux@googlegroups.com, i2c@lm-sensors.org, linux-mips@linux-mips.org, linux-kernel@vger.kernel.org List-Id: linux-i2c@vger.kernel.org Oh, BTW... On Wed, 7 May 2008 01:40:27 +0100 (BST), Maciej W. Rozycki wrote: > (...) > 1. i2c-swarm.c -- SWARM I2C board setup, currently for the M41T80 chip on > the bus #1 only. > (...) > --- linux-2.6.26-rc1-20080505.macro/arch/mips/sibyte/swarm/Makefile 2004-01-29 04:57:05.000000000 +0000 > +++ linux-2.6.26-rc1-20080505/arch/mips/sibyte/swarm/Makefile 2008-05-06 01:18:21.000000000 +0000 > @@ -1,3 +1,4 @@ > -lib-y = setup.o rtc_xicor1241.o rtc_m41t81.o > +obj-y := setup.o rtc_xicor1241.o rtc_m41t81.o > > -lib-$(CONFIG_KGDB) += dbg_io.o > +obj-$(CONFIG_I2C_BOARDINFO) += i2c-swarm.o > +obj-$(CONFIG_KGDB) += dbg_io.o > (...) > --- linux-2.6.26-rc1-20080505.macro/arch/mips/sibyte/swarm/i2c-swarm.c 1970-01-01 00:00:00.000000000 +0000 > +++ linux-2.6.26-rc1-20080505/arch/mips/sibyte/swarm/i2c-swarm.c 2008-05-06 23:51:34.000000000 +0000 i2c-foo.c is consistently used for i2c bus driver themselves so far. It's somewhat confusing to see you name platform code that way. It's also redundant, given that the file lives in the swarm platform directory. May I suggest naming this file just arch/mips/sibyte/swarm/i2c.c? Other architectures (cris, arm) are doing this already. -- Jean Delvare