Re: [patch 3/3] i2c: add support for i2c bus on Freescale CPM1/CPM2 controllers

[Wolfram Sang <w.sang-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>]

[-- Attachment #1.1: Type: text/plain, Size: 1018 bytes --]

On Fri, May 16, 2008 at 09:08:18PM +0200, Jean Delvare wrote:
> Would you have the possibility to review and ack this patch (with the
> suggested fix above, of course)? I'd like to include it in my i2c tree
> now as it has been around for some time but I'm a bit short of time to
> review it and I also can't test it. If you can do that then I'll trust
> your review and take the patch quickly.
Well, I could review it and give further testing on Monday. Still, I
wouldn't call my experiences in the linux-kernelspace (yet) big enough
to trust only this review. Still, thanks for your trust :)

> With the time saved, I could, say, review the at24c driver ;)
Hehe, nice offer. Though, I'd suggest to wait for the upcoming version
of the at24-driver, which will include proper device table support. I
already made up my mind how to implement it, just have to get hacking.

   Wolfram

-- 
  Dipl.-Ing. Wolfram Sang | http://www.pengutronix.de
 Pengutronix - Linux Solutions for Science and Industry

[-- Attachment #1.2: Digital signature --]
[-- Type: application/pgp-signature, Size: 189 bytes --]

[-- Attachment #2: Type: text/plain, Size: 157 bytes --]

_______________________________________________
i2c mailing list
i2c-GZX6beZjE8VD60Wz+7aTrA@public.gmane.org
http://lists.lm-sensors.org/mailman/listinfo/i2c