From mboxrd@z Thu Jan 1 00:00:00 1970 From: Jean Delvare Subject: Re: [PATCHv2] i2c: adds support for i2c bus on Freescale CPM1/CPM2 controllers Date: Thu, 29 May 2008 17:52:26 +0200 Message-ID: <20080529175226.273f9d49@hyperion.delvare> References: <4834504E.6060205@scram.de> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <4834504E.6060205@scram.de> List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: linuxppc-dev-bounces+glppd-linuxppc64-dev=m.gmane.org@ozlabs.org Errors-To: linuxppc-dev-bounces+glppd-linuxppc64-dev=m.gmane.org@ozlabs.org To: Jochen Friedrich Cc: Wolfram Sang , "Kernel, Linux" , linuxppc-dev list , Linux I2C , Scott Wood , Andrew Morton , Boris Shteinbock List-Id: linux-i2c@vger.kernel.org On Wed, 21 May 2008 18:39:42 +0200, Jochen Friedrich wrote: > This driver uses the port of 2.4 code from Vitaly Bordug > and the actual algorithm used by the i2c > driver of the DBox code on cvs.tuxboc.org from Felix Domke > (tmbinc@gmx.net) and Gillem (htoa@gmx.net) converted to an > of_platform_driver. Tested on CPM1 (MPC823 on dbox2 hardware) and > CPM2 (MPC8272). > > Signed-off-by: Jochen Friedrich > --- > drivers/i2c/busses/Kconfig | 10 + > drivers/i2c/busses/Makefile | 1 + > drivers/i2c/busses/i2c-cpm.c | 745 ++++++++++++++++++++++++++++++++++++++++++ > 3 files changed, 756 insertions(+), 0 deletions(-) > create mode 100644 drivers/i2c/busses/i2c-cpm.c > > Changes since last version: > - change bus-frequency -> clock-frequency to comply to OF standard. > Applied, thanks. And thanks a lot to Wolfram for the review :) -- Jean Delvare