From: Ben Dooks <ben-linux-elnMNo+KYs3YtjvyW6yDsg@public.gmane.org>
To: Jean Delvare <khali-PUYAD+kWke1g9hUCZPvPmw@public.gmane.org>
Cc: i2c-GZX6beZjE8VD60Wz+7aTrA@public.gmane.org,
Ben Dooks <ben-linux-elnMNo+KYs3YtjvyW6yDsg@public.gmane.org>
Subject: Re: [patch 5/8] OSIRIS: Add i2c device list to Simtec Osiris
Date: Sun, 1 Jun 2008 22:35:09 +0100 [thread overview]
Message-ID: <20080601213509.GH7334@trinity.fluff.org> (raw)
In-Reply-To: <20080601092116.63c4808e-ig7AzVSIIG7kN2dkZ6Wm7A@public.gmane.org>
On Sun, Jun 01, 2008 at 09:21:16AM +0200, Jean Delvare wrote:
> Hi Ben,
>
> On Thu, 29 May 2008 14:22:49 +0100, Ben Dooks wrote:
> > Add an i2c board information initialisers to the board
> > to define which devices are present.
> >
> > Signed-off-by: Ben Dooks <ben-linux-elnMNo+KYs3YtjvyW6yDsg@public.gmane.org>
> >
> > --- linux-2.6.26-rc4-quilt1.orig/arch/arm/mach-s3c2440/mach-osiris.c 2008-05-27 15:14:42.000000000 +0100
> > +++ linux-2.6.26-rc4-quilt1/arch/arm/mach-s3c2440/mach-osiris.c 2008-05-27 15:22:33.000000000 +0100
> > @@ -1,6 +1,6 @@
> > /* linux/arch/arm/mach-s3c2440/mach-osiris.c
> > *
> > - * Copyright (c) 2005 Simtec Electronics
> > + * Copyright (c) 2005,2008 Simtec Electronics
> > * http://armlinux.simtec.co.uk/
> > * Ben Dooks <ben-Y5A6D6n0/KfQXOPxS62xeg@public.gmane.org>
> > *
> > @@ -19,6 +19,7 @@
> > #include <linux/sysdev.h>
> > #include <linux/serial_core.h>
> > #include <linux/clk.h>
> > +#include <linux/i2c.h>
> >
> > #include <asm/mach/arch.h>
> > #include <asm/mach/map.h>
> > @@ -322,6 +323,19 @@ static struct sys_device osiris_pm_sysde
> > .cls = &osiris_pm_sysclass,
> > };
> >
> > +/* I2C devices fitted. */
> > +
> > +static struct i2c_board_info osiris_i2c_info[] __initdata = {
> > + {
> > + .type = "tps65011",
> > + .addr = 0x48,
>
> Please use the I2C_BOARD_INFO helper in all your device declarations.
>
> > + .irq = IRQ_EINT20,
> > + }, {
> > + .type = "eeprom",
> > + .addr = 0x50,
> > + }
>
> The "eeprom" driver is not a new-style i2c driver, so it won't be able
> to bind to device. Having it declared here even prevents the legacy
> binding to happen, because the address will be busy. So you should
> either not list the eeprom here and let the legacy eeprom driver pick
> it later, or add a new-style mode to the eeprom driver - but then you
> probably want to use David Brownell and Wolfram Sang's at24 driver
> instead, it's much better.
Thanks, I'll change this to at94. Is this driver going to be included
on the next kernel window?
--
Ben
Q: What's a light-year?
A: One-third less calories than a regular year.
_______________________________________________
i2c mailing list
i2c-GZX6beZjE8VD60Wz+7aTrA@public.gmane.org
http://lists.lm-sensors.org/mailman/listinfo/i2c
next prev parent reply other threads:[~2008-06-01 21:35 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-05-29 13:22 [patch 0/8] I2C fixes and -next from Ben Dooks Ben Dooks
2008-05-29 13:22 ` [patch 1/8] I2C: S3C2410: Check ACK on byte transmission Ben Dooks
[not found] ` <20080529132405.971048345-elnMNo+KYs3pIgCt6eIbzw@public.gmane.org>
2008-05-30 19:45 ` Jean Delvare
[not found] ` <20080530214540.638008b7-ig7AzVSIIG7kN2dkZ6Wm7A@public.gmane.org>
2008-06-02 19:29 ` Ben Dooks
2008-05-29 13:22 ` [patch 2/8] I2C: S3C2410: Add MODULE_ALIAS() for s3c2440 device Ben Dooks
[not found] ` <20080529132406.186957190-elnMNo+KYs3pIgCt6eIbzw@public.gmane.org>
2008-05-30 19:54 ` Jean Delvare
[not found] ` <20080530215452.2ee3d4a7-ig7AzVSIIG7kN2dkZ6Wm7A@public.gmane.org>
2008-06-01 21:51 ` Ben Dooks
[not found] ` <20080601215102.GJ7334-SMNkleLxa3Z6Wcw2j4pizdi2O/JbrIOy@public.gmane.org>
2008-06-02 6:59 ` Jean Delvare
2008-05-29 13:22 ` [patch 3/8] I2C: S3C2410: Pass the I2C bus number via drivers platform data Ben Dooks
[not found] ` <20080529132406.387873305-elnMNo+KYs3pIgCt6eIbzw@public.gmane.org>
2008-06-01 7:07 ` Jean Delvare
[not found] ` <20080601090706.0e29a76d-ig7AzVSIIG7kN2dkZ6Wm7A@public.gmane.org>
2008-06-01 21:53 ` Ben Dooks
[not found] ` <20080601215335.GK7334-SMNkleLxa3Z6Wcw2j4pizdi2O/JbrIOy@public.gmane.org>
2008-06-02 6:38 ` Jean Delvare
2008-05-29 13:22 ` [patch 4/8] I2C: S3C2410: Add a option of reducing the bus busy waiting time Ben Dooks
[not found] ` <20080529132406.586501777-elnMNo+KYs3pIgCt6eIbzw@public.gmane.org>
2008-06-01 7:16 ` Jean Delvare
2008-05-29 13:22 ` [patch 5/8] OSIRIS: Add i2c device list to Simtec Osiris Ben Dooks
[not found] ` <20080529132406.837870894-elnMNo+KYs3pIgCt6eIbzw@public.gmane.org>
2008-06-01 7:21 ` Jean Delvare
[not found] ` <20080601092116.63c4808e-ig7AzVSIIG7kN2dkZ6Wm7A@public.gmane.org>
2008-06-01 21:35 ` Ben Dooks [this message]
[not found] ` <20080601213509.GH7334-SMNkleLxa3Z6Wcw2j4pizdi2O/JbrIOy@public.gmane.org>
2008-06-02 6:31 ` Jean Delvare
2008-05-29 13:22 ` [patch 6/8] BAST: Add i2c device list on Simtec Bast Ben Dooks
2008-05-29 13:22 ` [patch 7/8] VR1000: Add i2c device list to Thorcom VR1000 Ben Dooks
[not found] ` <20080529132407.211335410-elnMNo+KYs3pIgCt6eIbzw@public.gmane.org>
2008-06-01 7:32 ` Jean Delvare
[not found] ` <20080601093215.67a1ac41-ig7AzVSIIG7kN2dkZ6Wm7A@public.gmane.org>
2008-06-01 21:38 ` Ben Dooks
[not found] ` <20080601213855.GI7334-SMNkleLxa3Z6Wcw2j4pizdi2O/JbrIOy@public.gmane.org>
2008-06-02 6:35 ` Jean Delvare
2008-05-29 13:22 ` [patch 8/8] ANUBIS: Add i2c device list to Simtec Anubis Ben Dooks
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20080601213509.GH7334@trinity.fluff.org \
--to=ben-linux-elnmno+kys3ytjvyw6ydsg@public.gmane.org \
--cc=i2c-GZX6beZjE8VD60Wz+7aTrA@public.gmane.org \
--cc=khali-PUYAD+kWke1g9hUCZPvPmw@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox