From mboxrd@z Thu Jan 1 00:00:00 1970 From: Stefan Roese Subject: Re: [PATCH] i2c-ibm_iic: Remove deprecated OCP style part of the driver Date: Wed, 4 Jun 2008 21:33:18 +0200 Message-ID: <200806042133.18215.sr@denx.de> References: <1212592932-24031-1-git-send-email-sr@denx.de> <20080604210400.0d7abb8e@hyperion.delvare> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <20080604210400.0d7abb8e-ig7AzVSIIG7kN2dkZ6Wm7A@public.gmane.org> Content-Disposition: inline List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: i2c-bounces-GZX6beZjE8VD60Wz+7aTrA@public.gmane.org Errors-To: i2c-bounces-GZX6beZjE8VD60Wz+7aTrA@public.gmane.org To: Jean Delvare Cc: linuxppc-dev-mnsaURCQ41sdnm+yROfE0A@public.gmane.org, i2c-GZX6beZjE8VD60Wz+7aTrA@public.gmane.org List-Id: linux-i2c@vger.kernel.org On Wednesday 04 June 2008, Jean Delvare wrote: > On Wed, 4 Jun 2008 17:22:12 +0200, Stefan Roese wrote: > > The deprecated OCP style driver part is used by the "old" arch/ppc > > platform. This platform is scheduled for removal in June/July this year. > > This patch now removes the OCP driver part from the IBM I2C driver. > > > > Signed-off-by: Stefan Roese > > --- > > drivers/i2c/busses/i2c-ibm_iic.c | 181 > > -------------------------------------- 1 files changed, 0 insertions(+), > > 181 deletions(-) > > Applied, queued for 2.6.27, thanks Stefan. Thanks. I'll post some smaller follow-up patches probably tomorrow. > BTW, would you happen to know if read-only EEPROMs such as SPD or EDID > can be found on the i2c-ibm_iic adapters? Yes. Some PPC4xx boards are equipped with DIMM modules. Those SPD EEPROM's are connected to the I2C bus controller by the i2c-ibm_iic driver. Best regards, Stefan _______________________________________________ i2c mailing list i2c-GZX6beZjE8VD60Wz+7aTrA@public.gmane.org http://lists.lm-sensors.org/mailman/listinfo/i2c