From mboxrd@z Thu Jan 1 00:00:00 1970 From: Jean Delvare Subject: Re: [PATCH 2/3] i2c: Let bus drivers add SPD to their class Date: Wed, 4 Jun 2008 23:01:44 +0200 Message-ID: <20080604230144.424e6047@hyperion.delvare> References: <20080603130221.1f819e64@hyperion.delvare> <200806031319.56606.david-b@pacbell.net> <20080604080933.456c8ce2@hyperion.delvare> <200806040018.10191.david-b@pacbell.net> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: i2c-bounces-GZX6beZjE8VD60Wz+7aTrA@public.gmane.org Errors-To: i2c-bounces-GZX6beZjE8VD60Wz+7aTrA@public.gmane.org To: Trent Piepho Cc: David Brownell , Linux I2C List-Id: linux-i2c@vger.kernel.org Hi Trent, On Wed, 4 Jun 2008 13:05:31 -0700 (PDT), Trent Piepho wrote: > On Wed, 4 Jun 2008, David Brownell wrote: > > Oh, and parport. DRAM sticks, or LCD displays, over parport > > links would be strange. ;) > > An eeprom programmer or reader using a parport i2c interface doesn't seem > all that strange. If I needed to make an i2c eeprom programmer, that's > probably what I'd do. But then you'd use the eeprog user-space tool (or equivalent) to read from and write to the EEPROM, rather than the read-only eeprom driver, wouldn't you? -- Jean Delvare _______________________________________________ i2c mailing list i2c-GZX6beZjE8VD60Wz+7aTrA@public.gmane.org http://lists.lm-sensors.org/mailman/listinfo/i2c