From: Jean Delvare <khali-PUYAD+kWke1g9hUCZPvPmw@public.gmane.org>
To: Linux I2C <i2c-GZX6beZjE8VD60Wz+7aTrA@public.gmane.org>,
LM Sensors <lm-sensors-GZX6beZjE8VD60Wz+7aTrA@public.gmane.org>
Cc: Ben Hutchings <bhutchings-s/n/eUQHGBpZroRs9YW3xA@public.gmane.org>
Subject: [PATCH] hwmon: (lm87) Convert to a new-style i2c driver
Date: Wed, 16 Jul 2008 16:41:28 +0200 [thread overview]
Message-ID: <20080716164128.46f6766e@hyperion.delvare> (raw)
The new-style lm87 driver implements the optional detect() callback
to cover the use cases of the legacy driver.
Signed-off-by: Jean Delvare <khali-PUYAD+kWke1g9hUCZPvPmw@public.gmane.org>
Cc: Ben Hutchings <bhutchings-s/n/eUQHGBpZroRs9YW3xA@public.gmane.org>
---
drivers/hwmon/lm87.c | 99 +++++++++++++++++++++++---------------------------
1 file changed, 46 insertions(+), 53 deletions(-)
--- linux-2.6.26-rc9.orig/drivers/hwmon/lm87.c 2008-07-12 09:20:29.000000000 +0200
+++ linux-2.6.26-rc9/drivers/hwmon/lm87.c 2008-07-12 10:27:17.000000000 +0200
@@ -5,7 +5,7 @@
* Philip Edelbrock <phil-KXOFo5pg7o1l57MIdRCFDg@public.gmane.org>
* Stephen Rousset <stephen.rousset-RtyX3GHucphnQYSypqKXDg@public.gmane.org>
* Dan Eaton <dan.eaton-RtyX3GHucphnQYSypqKXDg@public.gmane.org>
- * Copyright (C) 2004,2007 Jean Delvare <khali-PUYAD+kWke1g9hUCZPvPmw@public.gmane.org>
+ * Copyright (C) 2004-2008 Jean Delvare <khali-PUYAD+kWke1g9hUCZPvPmw@public.gmane.org>
*
* Original port to Linux 2.6 by Jeff Oliver.
*
@@ -157,22 +157,35 @@ static u8 LM87_REG_TEMP_LOW[3] = { 0x3A,
* Functions declaration
*/
-static int lm87_attach_adapter(struct i2c_adapter *adapter);
-static int lm87_detect(struct i2c_adapter *adapter, int address, int kind);
+static int lm87_probe(struct i2c_client *client,
+ const struct i2c_device_id *id);
+static int lm87_detect(struct i2c_client *new_client, int kind,
+ struct i2c_board_info *info);
static void lm87_init_client(struct i2c_client *client);
-static int lm87_detach_client(struct i2c_client *client);
+static int lm87_remove(struct i2c_client *client);
static struct lm87_data *lm87_update_device(struct device *dev);
/*
* Driver data (common to all clients)
*/
+static const struct i2c_device_id lm87_id[] = {
+ { "lm87", lm87 },
+ { "adm1024", adm1024 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, lm87_id);
+
static struct i2c_driver lm87_driver = {
+ .class = I2C_CLASS_HWMON,
.driver = {
.name = "lm87",
},
- .attach_adapter = lm87_attach_adapter,
- .detach_client = lm87_detach_client,
+ .probe = lm87_probe,
+ .remove = lm87_remove,
+ .id_table = lm87_id,
+ .detect = lm87_detect,
+ .address_data = &addr_data,
};
/*
@@ -180,7 +193,6 @@ static struct i2c_driver lm87_driver = {
*/
struct lm87_data {
- struct i2c_client client;
struct device *hwmon_dev;
struct mutex update_lock;
char valid; /* zero until following fields are valid */
@@ -562,13 +574,6 @@ static SENSOR_DEVICE_ATTR(temp3_fault, S
* Real code
*/
-static int lm87_attach_adapter(struct i2c_adapter *adapter)
-{
- if (!(adapter->class & I2C_CLASS_HWMON))
- return 0;
- return i2c_probe(adapter, &addr_data, lm87_detect);
-}
-
static struct attribute *lm87_attributes[] = {
&dev_attr_in1_input.attr,
&dev_attr_in1_min.attr,
@@ -656,33 +661,15 @@ static const struct attribute_group lm87
.attrs = lm87_attributes_opt,
};
-/*
- * The following function does more than just detection. If detection
- * succeeds, it also registers the new chip.
- */
-static int lm87_detect(struct i2c_adapter *adapter, int address, int kind)
+/* Return 0 if detection is successful, -ENODEV otherwise */
+static int lm87_detect(struct i2c_client *new_client, int kind,
+ struct i2c_board_info *info)
{
- struct i2c_client *new_client;
- struct lm87_data *data;
- int err = 0;
+ struct i2c_adapter *adapter = new_client->adapter;
static const char *names[] = { "lm87", "adm1024" };
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
- goto exit;
-
- if (!(data = kzalloc(sizeof(struct lm87_data), GFP_KERNEL))) {
- err = -ENOMEM;
- goto exit;
- }
-
- /* The common I2C client data is placed right before the
- LM87-specific data. */
- new_client = &data->client;
- i2c_set_clientdata(new_client, data);
- new_client->addr = address;
- new_client->adapter = adapter;
- new_client->driver = &lm87_driver;
- new_client->flags = 0;
+ return -ENODEV;
/* Default to an LM87 if forced */
if (kind == 0)
@@ -704,20 +691,32 @@ static int lm87_detect(struct i2c_adapte
|| (lm87_read_value(new_client, LM87_REG_CONFIG) & 0x80)) {
dev_dbg(&adapter->dev,
"LM87 detection failed at 0x%02x.\n",
- address);
- goto exit_free;
+ new_client->addr);
+ return -ENODEV;
}
}
- /* We can fill in the remaining client fields */
- strlcpy(new_client->name, names[kind - 1], I2C_NAME_SIZE);
+ strlcpy(info->type, names[kind - 1], I2C_NAME_SIZE);
+
+ return 0;
+}
+
+static int lm87_probe(struct i2c_client *new_client,
+ const struct i2c_device_id *id)
+{
+ struct lm87_data *data;
+ int err;
+
+ data = kzalloc(sizeof(struct lm87_data), GFP_KERNEL);
+ if (!data) {
+ err = -ENOMEM;
+ goto exit;
+ }
+
+ i2c_set_clientdata(new_client, data);
data->valid = 0;
mutex_init(&data->update_lock);
- /* Tell the I2C layer a new client has arrived */
- if ((err = i2c_attach_client(new_client)))
- goto exit_free;
-
/* Initialize the LM87 chip */
lm87_init_client(new_client);
@@ -732,7 +731,7 @@ static int lm87_detect(struct i2c_adapte
/* Register sysfs hooks */
if ((err = sysfs_create_group(&new_client->dev.kobj, &lm87_group)))
- goto exit_detach;
+ goto exit_free;
if (data->channel & CHAN_NO_FAN(0)) {
if ((err = device_create_file(&new_client->dev,
@@ -832,8 +831,6 @@ static int lm87_detect(struct i2c_adapte
exit_remove:
sysfs_remove_group(&new_client->dev.kobj, &lm87_group);
sysfs_remove_group(&new_client->dev.kobj, &lm87_group_opt);
-exit_detach:
- i2c_detach_client(new_client);
exit_free:
kfree(data);
exit:
@@ -877,18 +874,14 @@ static void lm87_init_client(struct i2c_
}
}
-static int lm87_detach_client(struct i2c_client *client)
+static int lm87_remove(struct i2c_client *client)
{
struct lm87_data *data = i2c_get_clientdata(client);
- int err;
hwmon_device_unregister(data->hwmon_dev);
sysfs_remove_group(&client->dev.kobj, &lm87_group);
sysfs_remove_group(&client->dev.kobj, &lm87_group_opt);
- if ((err = i2c_detach_client(client)))
- return err;
-
kfree(data);
return 0;
}
--
Jean Delvare
_______________________________________________
i2c mailing list
i2c-GZX6beZjE8VD60Wz+7aTrA@public.gmane.org
http://lists.lm-sensors.org/mailman/listinfo/i2c
next reply other threads:[~2008-07-16 14:41 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-07-16 14:41 Jean Delvare [this message]
[not found] ` <20080716164128.46f6766e-ig7AzVSIIG7kN2dkZ6Wm7A@public.gmane.org>
2008-07-16 21:05 ` [lm-sensors] [PATCH] hwmon: (lm87) Convert to a new-style i2c driver Hans de Goede
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20080716164128.46f6766e@hyperion.delvare \
--to=khali-puyad+kwke1g9huczpvpmw@public.gmane.org \
--cc=bhutchings-s/n/eUQHGBpZroRs9YW3xA@public.gmane.org \
--cc=i2c-GZX6beZjE8VD60Wz+7aTrA@public.gmane.org \
--cc=lm-sensors-GZX6beZjE8VD60Wz+7aTrA@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox