* [PATCH 4/6] I2C: MENELAUS: Move menelaus register map to include/linux/i2c/menelaus.h
@ 2008-08-06 18:01 Carlos Aguiar
[not found] ` <4899E6DD.90909-knKY8vlp0dIIdKJ7tpkyPg@public.gmane.org>
0 siblings, 1 reply; 2+ messages in thread
From: Carlos Aguiar @ 2008-08-06 18:01 UTC (permalink / raw)
To: i2c-GZX6beZjE8VD60Wz+7aTrA
From: Carlos Eduardo Aguiar <carlos.aguiar-knKY8vlp0dIIdKJ7tpkyPg@public.gmane.org>
This patch moves menelaus register map to include/linux/i2c/menelaus.h
Signed-off-by: Carlos Eduardo Aguiar <carlos.aguiar-knKY8vlp0dIIdKJ7tpkyPg@public.gmane.org>
---
drivers/i2c/chips/menelaus.c | 111 -----------------------------------------
include/linux/i2c/menelaus.h | 112 ++++++++++++++++++++++++++++++++++++++++++
2 files changed, 112 insertions(+), 111 deletions(-)
diff --git a/drivers/i2c/chips/menelaus.c b/drivers/i2c/chips/menelaus.c
index 1f098c3..87c4246 100644
--- a/drivers/i2c/chips/menelaus.c
+++ b/drivers/i2c/chips/menelaus.c
@@ -49,117 +49,6 @@
#define DRIVER_NAME "menelaus"
-#define MENELAUS_I2C_ADDRESS 0x72
-
-#define MENELAUS_REV 0x01
-#define MENELAUS_VCORE_CTRL1 0x02
-#define MENELAUS_VCORE_CTRL2 0x03
-#define MENELAUS_VCORE_CTRL3 0x04
-#define MENELAUS_VCORE_CTRL4 0x05
-#define MENELAUS_VCORE_CTRL5 0x06
-#define MENELAUS_DCDC_CTRL1 0x07
-#define MENELAUS_DCDC_CTRL2 0x08
-#define MENELAUS_DCDC_CTRL3 0x09
-#define MENELAUS_LDO_CTRL1 0x0A
-#define MENELAUS_LDO_CTRL2 0x0B
-#define MENELAUS_LDO_CTRL3 0x0C
-#define MENELAUS_LDO_CTRL4 0x0D
-#define MENELAUS_LDO_CTRL5 0x0E
-#define MENELAUS_LDO_CTRL6 0x0F
-#define MENELAUS_LDO_CTRL7 0x10
-#define MENELAUS_LDO_CTRL8 0x11
-#define MENELAUS_SLEEP_CTRL1 0x12
-#define MENELAUS_SLEEP_CTRL2 0x13
-#define MENELAUS_DEVICE_OFF 0x14
-#define MENELAUS_OSC_CTRL 0x15
-#define MENELAUS_DETECT_CTRL 0x16
-#define MENELAUS_INT_MASK1 0x17
-#define MENELAUS_INT_MASK2 0x18
-#define MENELAUS_INT_STATUS1 0x19
-#define MENELAUS_INT_STATUS2 0x1A
-#define MENELAUS_INT_ACK1 0x1B
-#define MENELAUS_INT_ACK2 0x1C
-#define MENELAUS_GPIO_CTRL 0x1D
-#define MENELAUS_GPIO_IN 0x1E
-#define MENELAUS_GPIO_OUT 0x1F
-#define MENELAUS_BBSMS 0x20
-#define MENELAUS_RTC_CTRL 0x21
-#define MENELAUS_RTC_UPDATE 0x22
-#define MENELAUS_RTC_SEC 0x23
-#define MENELAUS_RTC_MIN 0x24
-#define MENELAUS_RTC_HR 0x25
-#define MENELAUS_RTC_DAY 0x26
-#define MENELAUS_RTC_MON 0x27
-#define MENELAUS_RTC_YR 0x28
-#define MENELAUS_RTC_WKDAY 0x29
-#define MENELAUS_RTC_AL_SEC 0x2A
-#define MENELAUS_RTC_AL_MIN 0x2B
-#define MENELAUS_RTC_AL_HR 0x2C
-#define MENELAUS_RTC_AL_DAY 0x2D
-#define MENELAUS_RTC_AL_MON 0x2E
-#define MENELAUS_RTC_AL_YR 0x2F
-#define MENELAUS_RTC_COMP_MSB 0x30
-#define MENELAUS_RTC_COMP_LSB 0x31
-#define MENELAUS_S1_PULL_EN 0x32
-#define MENELAUS_S1_PULL_DIR 0x33
-#define MENELAUS_S2_PULL_EN 0x34
-#define MENELAUS_S2_PULL_DIR 0x35
-#define MENELAUS_MCT_CTRL1 0x36
-#define MENELAUS_MCT_CTRL2 0x37
-#define MENELAUS_MCT_CTRL3 0x38
-#define MENELAUS_MCT_PIN_ST 0x39
-#define MENELAUS_DEBOUNCE1 0x3A
-
-#define IH_MENELAUS_IRQS 12
-#define MENELAUS_MMC_S1CD_IRQ 0 /* MMC slot 1 card change */
-#define MENELAUS_MMC_S2CD_IRQ 1 /* MMC slot 2 card change */
-#define MENELAUS_MMC_S1D1_IRQ 2 /* MMC DAT1 low in slot 1 */
-#define MENELAUS_MMC_S2D1_IRQ 3 /* MMC DAT1 low in slot 2 */
-#define MENELAUS_LOWBAT_IRQ 4 /* Low battery */
-#define MENELAUS_HOTDIE_IRQ 5 /* Hot die detect */
-#define MENELAUS_UVLO_IRQ 6 /* UVLO detect */
-#define MENELAUS_TSHUT_IRQ 7 /* Thermal shutdown */
-#define MENELAUS_RTCTMR_IRQ 8 /* RTC timer */
-#define MENELAUS_RTCALM_IRQ 9 /* RTC alarm */
-#define MENELAUS_RTCERR_IRQ 10 /* RTC error */
-#define MENELAUS_PSHBTN_IRQ 11 /* Push button */
-#define MENELAUS_RESERVED12_IRQ 12 /* Reserved */
-#define MENELAUS_RESERVED13_IRQ 13 /* Reserved */
-#define MENELAUS_RESERVED14_IRQ 14 /* Reserved */
-#define MENELAUS_RESERVED15_IRQ 15 /* Reserved */
-
-/* VCORE_CTRL1 register */
-#define VCORE_CTRL1_BYP_COMP (1 << 5)
-#define VCORE_CTRL1_HW_NSW (1 << 7)
-
-/* GPIO_CTRL register */
-#define GPIO_CTRL_SLOTSELEN (1 << 5)
-#define GPIO_CTRL_SLPCTLEN (1 << 6)
-#define GPIO1_DIR_INPUT (1 << 0)
-#define GPIO2_DIR_INPUT (1 << 1)
-#define GPIO3_DIR_INPUT (1 << 2)
-
-/* MCT_CTRL1 register */
-#define MCT_CTRL1_S1_CMD_OD (1 << 2)
-#define MCT_CTRL1_S2_CMD_OD (1 << 3)
-
-/* MCT_CTRL2 register */
-#define MCT_CTRL2_VS2_SEL_D0 (1 << 0)
-#define MCT_CTRL2_VS2_SEL_D1 (1 << 1)
-#define MCT_CTRL2_S1CD_BUFEN (1 << 4)
-#define MCT_CTRL2_S2CD_BUFEN (1 << 5)
-#define MCT_CTRL2_S1CD_DBEN (1 << 6)
-#define MCT_CTRL2_S2CD_BEN (1 << 7)
-
-/* MCT_CTRL3 register */
-#define MCT_CTRL3_SLOT1_EN (1 << 0)
-#define MCT_CTRL3_SLOT2_EN (1 << 1)
-#define MCT_CTRL3_S1_AUTO_EN (1 << 2)
-#define MCT_CTRL3_S2_AUTO_EN (1 << 3)
-
-/* MCT_PIN_ST register */
-#define MCT_PIN_ST_S1_CD_ST (1 << 0)
-#define MCT_PIN_ST_S2_CD_ST (1 << 1)
static void menelaus_work(struct work_struct *_menelaus);
diff --git a/include/linux/i2c/menelaus.h b/include/linux/i2c/menelaus.h
index e1012c1..1660418 100644
--- a/include/linux/i2c/menelaus.h
+++ b/include/linux/i2c/menelaus.h
@@ -7,6 +7,118 @@
#ifndef __ASM_ARCH_MENELAUS_H
#define __ASM_ARCH_MENELAUS_H
+#define MENELAUS_I2C_ADDRESS 0x72
+
+#define MENELAUS_REV 0x01
+#define MENELAUS_VCORE_CTRL1 0x02
+#define MENELAUS_VCORE_CTRL2 0x03
+#define MENELAUS_VCORE_CTRL3 0x04
+#define MENELAUS_VCORE_CTRL4 0x05
+#define MENELAUS_VCORE_CTRL5 0x06
+#define MENELAUS_DCDC_CTRL1 0x07
+#define MENELAUS_DCDC_CTRL2 0x08
+#define MENELAUS_DCDC_CTRL3 0x09
+#define MENELAUS_LDO_CTRL1 0x0A
+#define MENELAUS_LDO_CTRL2 0x0B
+#define MENELAUS_LDO_CTRL3 0x0C
+#define MENELAUS_LDO_CTRL4 0x0D
+#define MENELAUS_LDO_CTRL5 0x0E
+#define MENELAUS_LDO_CTRL6 0x0F
+#define MENELAUS_LDO_CTRL7 0x10
+#define MENELAUS_LDO_CTRL8 0x11
+#define MENELAUS_SLEEP_CTRL1 0x12
+#define MENELAUS_SLEEP_CTRL2 0x13
+#define MENELAUS_DEVICE_OFF 0x14
+#define MENELAUS_OSC_CTRL 0x15
+#define MENELAUS_DETECT_CTRL 0x16
+#define MENELAUS_INT_MASK1 0x17
+#define MENELAUS_INT_MASK2 0x18
+#define MENELAUS_INT_STATUS1 0x19
+#define MENELAUS_INT_STATUS2 0x1A
+#define MENELAUS_INT_ACK1 0x1B
+#define MENELAUS_INT_ACK2 0x1C
+#define MENELAUS_GPIO_CTRL 0x1D
+#define MENELAUS_GPIO_IN 0x1E
+#define MENELAUS_GPIO_OUT 0x1F
+#define MENELAUS_BBSMS 0x20
+#define MENELAUS_RTC_CTRL 0x21
+#define MENELAUS_RTC_UPDATE 0x22
+#define MENELAUS_RTC_SEC 0x23
+#define MENELAUS_RTC_MIN 0x24
+#define MENELAUS_RTC_HR 0x25
+#define MENELAUS_RTC_DAY 0x26
+#define MENELAUS_RTC_MON 0x27
+#define MENELAUS_RTC_YR 0x28
+#define MENELAUS_RTC_WKDAY 0x29
+#define MENELAUS_RTC_AL_SEC 0x2A
+#define MENELAUS_RTC_AL_MIN 0x2B
+#define MENELAUS_RTC_AL_HR 0x2C
+#define MENELAUS_RTC_AL_DAY 0x2D
+#define MENELAUS_RTC_AL_MON 0x2E
+#define MENELAUS_RTC_AL_YR 0x2F
+#define MENELAUS_RTC_COMP_MSB 0x30
+#define MENELAUS_RTC_COMP_LSB 0x31
+#define MENELAUS_S1_PULL_EN 0x32
+#define MENELAUS_S1_PULL_DIR 0x33
+#define MENELAUS_S2_PULL_EN 0x34
+#define MENELAUS_S2_PULL_DIR 0x35
+#define MENELAUS_MCT_CTRL1 0x36
+#define MENELAUS_MCT_CTRL2 0x37
+#define MENELAUS_MCT_CTRL3 0x38
+#define MENELAUS_MCT_PIN_ST 0x39
+#define MENELAUS_DEBOUNCE1 0x3A
+
+#define IH_MENELAUS_IRQS 12
+#define MENELAUS_MMC_S1CD_IRQ 0 /* MMC slot 1 card change */
+#define MENELAUS_MMC_S2CD_IRQ 1 /* MMC slot 2 card change */
+#define MENELAUS_MMC_S1D1_IRQ 2 /* MMC DAT1 low in slot 1 */
+#define MENELAUS_MMC_S2D1_IRQ 3 /* MMC DAT1 low in slot 2 */
+#define MENELAUS_LOWBAT_IRQ 4 /* Low battery */
+#define MENELAUS_HOTDIE_IRQ 5 /* Hot die detect */
+#define MENELAUS_UVLO_IRQ 6 /* UVLO detect */
+#define MENELAUS_TSHUT_IRQ 7 /* Thermal shutdown */
+#define MENELAUS_RTCTMR_IRQ 8 /* RTC timer */
+#define MENELAUS_RTCALM_IRQ 9 /* RTC alarm */
+#define MENELAUS_RTCERR_IRQ 10 /* RTC error */
+#define MENELAUS_PSHBTN_IRQ 11 /* Push button */
+#define MENELAUS_RESERVED12_IRQ 12 /* Reserved */
+#define MENELAUS_RESERVED13_IRQ 13 /* Reserved */
+#define MENELAUS_RESERVED14_IRQ 14 /* Reserved */
+#define MENELAUS_RESERVED15_IRQ 15 /* Reserved */
+
+/* VCORE_CTRL1 register */
+#define VCORE_CTRL1_BYP_COMP (1 << 5)
+#define VCORE_CTRL1_HW_NSW (1 << 7)
+
+/* GPIO_CTRL register */
+#define GPIO_CTRL_SLOTSELEN (1 << 5)
+#define GPIO_CTRL_SLPCTLEN (1 << 6)
+#define GPIO1_DIR_INPUT (1 << 0)
+#define GPIO2_DIR_INPUT (1 << 1)
+#define GPIO3_DIR_INPUT (1 << 2)
+
+/* MCT_CTRL1 register */
+#define MCT_CTRL1_S1_CMD_OD (1 << 2)
+#define MCT_CTRL1_S2_CMD_OD (1 << 3)
+
+/* MCT_CTRL2 register */
+#define MCT_CTRL2_VS2_SEL_D0 (1 << 0)
+#define MCT_CTRL2_VS2_SEL_D1 (1 << 1)
+#define MCT_CTRL2_S1CD_BUFEN (1 << 4)
+#define MCT_CTRL2_S2CD_BUFEN (1 << 5)
+#define MCT_CTRL2_S1CD_DBEN (1 << 6)
+#define MCT_CTRL2_S2CD_BEN (1 << 7)
+
+/* MCT_CTRL3 register */
+#define MCT_CTRL3_SLOT1_EN (1 << 0)
+#define MCT_CTRL3_SLOT2_EN (1 << 1)
+#define MCT_CTRL3_S1_AUTO_EN (1 << 2)
+#define MCT_CTRL3_S2_AUTO_EN (1 << 3)
+
+/* MCT_PIN_ST register */
+#define MCT_PIN_ST_S1_CD_ST (1 << 0)
+#define MCT_PIN_ST_S2_CD_ST (1 << 1)
+
struct device;
struct menelaus_platform_data {
-- 1.5.5.1
_______________________________________________
i2c mailing list
i2c-GZX6beZjE8VD60Wz+7aTrA@public.gmane.org
http://lists.lm-sensors.org/mailman/listinfo/i2c
^ permalink raw reply related [flat|nested] 2+ messages in thread
* Re: [PATCH 4/6] I2C: MENELAUS: Move menelaus register map to include/linux/i2c/menelaus.h
[not found] ` <4899E6DD.90909-knKY8vlp0dIIdKJ7tpkyPg@public.gmane.org>
@ 2008-08-06 22:41 ` Ben Dooks
0 siblings, 0 replies; 2+ messages in thread
From: Ben Dooks @ 2008-08-06 22:41 UTC (permalink / raw)
To: Carlos Aguiar; +Cc: i2c-GZX6beZjE8VD60Wz+7aTrA
On Wed, Aug 06, 2008 at 02:01:01PM -0400, Carlos Aguiar wrote:
> From: Carlos Eduardo Aguiar <carlos.aguiar-knKY8vlp0dIIdKJ7tpkyPg@public.gmane.org>
>
> This patch moves menelaus register map to include/linux/i2c/menelaus.h
a hint of 'git mv' might have been helpful, although I expect
rename detection could have been applied.
> Signed-off-by: Carlos Eduardo Aguiar <carlos.aguiar-knKY8vlp0dIIdKJ7tpkyPg@public.gmane.org>
> ---
> drivers/i2c/chips/menelaus.c | 111 -----------------------------------------
> include/linux/i2c/menelaus.h | 112 ++++++++++++++++++++++++++++++++++++++++++
> 2 files changed, 112 insertions(+), 111 deletions(-)
>
> diff --git a/drivers/i2c/chips/menelaus.c b/drivers/i2c/chips/menelaus.c
> index 1f098c3..87c4246 100644
> --- a/drivers/i2c/chips/menelaus.c
> +++ b/drivers/i2c/chips/menelaus.c
> @@ -49,117 +49,6 @@
>
> #define DRIVER_NAME "menelaus"
>
> -#define MENELAUS_I2C_ADDRESS 0x72
> -
> -#define MENELAUS_REV 0x01
> -#define MENELAUS_VCORE_CTRL1 0x02
> -#define MENELAUS_VCORE_CTRL2 0x03
> -#define MENELAUS_VCORE_CTRL3 0x04
> -#define MENELAUS_VCORE_CTRL4 0x05
> -#define MENELAUS_VCORE_CTRL5 0x06
> -#define MENELAUS_DCDC_CTRL1 0x07
> -#define MENELAUS_DCDC_CTRL2 0x08
> -#define MENELAUS_DCDC_CTRL3 0x09
> -#define MENELAUS_LDO_CTRL1 0x0A
> -#define MENELAUS_LDO_CTRL2 0x0B
> -#define MENELAUS_LDO_CTRL3 0x0C
> -#define MENELAUS_LDO_CTRL4 0x0D
> -#define MENELAUS_LDO_CTRL5 0x0E
> -#define MENELAUS_LDO_CTRL6 0x0F
> -#define MENELAUS_LDO_CTRL7 0x10
> -#define MENELAUS_LDO_CTRL8 0x11
> -#define MENELAUS_SLEEP_CTRL1 0x12
> -#define MENELAUS_SLEEP_CTRL2 0x13
> -#define MENELAUS_DEVICE_OFF 0x14
> -#define MENELAUS_OSC_CTRL 0x15
> -#define MENELAUS_DETECT_CTRL 0x16
> -#define MENELAUS_INT_MASK1 0x17
> -#define MENELAUS_INT_MASK2 0x18
> -#define MENELAUS_INT_STATUS1 0x19
> -#define MENELAUS_INT_STATUS2 0x1A
> -#define MENELAUS_INT_ACK1 0x1B
> -#define MENELAUS_INT_ACK2 0x1C
> -#define MENELAUS_GPIO_CTRL 0x1D
> -#define MENELAUS_GPIO_IN 0x1E
> -#define MENELAUS_GPIO_OUT 0x1F
> -#define MENELAUS_BBSMS 0x20
> -#define MENELAUS_RTC_CTRL 0x21
> -#define MENELAUS_RTC_UPDATE 0x22
> -#define MENELAUS_RTC_SEC 0x23
> -#define MENELAUS_RTC_MIN 0x24
> -#define MENELAUS_RTC_HR 0x25
> -#define MENELAUS_RTC_DAY 0x26
> -#define MENELAUS_RTC_MON 0x27
> -#define MENELAUS_RTC_YR 0x28
> -#define MENELAUS_RTC_WKDAY 0x29
> -#define MENELAUS_RTC_AL_SEC 0x2A
> -#define MENELAUS_RTC_AL_MIN 0x2B
> -#define MENELAUS_RTC_AL_HR 0x2C
> -#define MENELAUS_RTC_AL_DAY 0x2D
> -#define MENELAUS_RTC_AL_MON 0x2E
> -#define MENELAUS_RTC_AL_YR 0x2F
> -#define MENELAUS_RTC_COMP_MSB 0x30
> -#define MENELAUS_RTC_COMP_LSB 0x31
> -#define MENELAUS_S1_PULL_EN 0x32
> -#define MENELAUS_S1_PULL_DIR 0x33
> -#define MENELAUS_S2_PULL_EN 0x34
> -#define MENELAUS_S2_PULL_DIR 0x35
> -#define MENELAUS_MCT_CTRL1 0x36
> -#define MENELAUS_MCT_CTRL2 0x37
> -#define MENELAUS_MCT_CTRL3 0x38
> -#define MENELAUS_MCT_PIN_ST 0x39
> -#define MENELAUS_DEBOUNCE1 0x3A
> -
> -#define IH_MENELAUS_IRQS 12
> -#define MENELAUS_MMC_S1CD_IRQ 0 /* MMC slot 1 card change */
> -#define MENELAUS_MMC_S2CD_IRQ 1 /* MMC slot 2 card change */
> -#define MENELAUS_MMC_S1D1_IRQ 2 /* MMC DAT1 low in slot 1 */
> -#define MENELAUS_MMC_S2D1_IRQ 3 /* MMC DAT1 low in slot 2 */
> -#define MENELAUS_LOWBAT_IRQ 4 /* Low battery */
> -#define MENELAUS_HOTDIE_IRQ 5 /* Hot die detect */
> -#define MENELAUS_UVLO_IRQ 6 /* UVLO detect */
> -#define MENELAUS_TSHUT_IRQ 7 /* Thermal shutdown */
> -#define MENELAUS_RTCTMR_IRQ 8 /* RTC timer */
> -#define MENELAUS_RTCALM_IRQ 9 /* RTC alarm */
> -#define MENELAUS_RTCERR_IRQ 10 /* RTC error */
> -#define MENELAUS_PSHBTN_IRQ 11 /* Push button */
> -#define MENELAUS_RESERVED12_IRQ 12 /* Reserved */
> -#define MENELAUS_RESERVED13_IRQ 13 /* Reserved */
> -#define MENELAUS_RESERVED14_IRQ 14 /* Reserved */
> -#define MENELAUS_RESERVED15_IRQ 15 /* Reserved */
> -
> -/* VCORE_CTRL1 register */
> -#define VCORE_CTRL1_BYP_COMP (1 << 5)
> -#define VCORE_CTRL1_HW_NSW (1 << 7)
> -
> -/* GPIO_CTRL register */
> -#define GPIO_CTRL_SLOTSELEN (1 << 5)
> -#define GPIO_CTRL_SLPCTLEN (1 << 6)
> -#define GPIO1_DIR_INPUT (1 << 0)
> -#define GPIO2_DIR_INPUT (1 << 1)
> -#define GPIO3_DIR_INPUT (1 << 2)
> -
> -/* MCT_CTRL1 register */
> -#define MCT_CTRL1_S1_CMD_OD (1 << 2)
> -#define MCT_CTRL1_S2_CMD_OD (1 << 3)
> -
> -/* MCT_CTRL2 register */
> -#define MCT_CTRL2_VS2_SEL_D0 (1 << 0)
> -#define MCT_CTRL2_VS2_SEL_D1 (1 << 1)
> -#define MCT_CTRL2_S1CD_BUFEN (1 << 4)
> -#define MCT_CTRL2_S2CD_BUFEN (1 << 5)
> -#define MCT_CTRL2_S1CD_DBEN (1 << 6)
> -#define MCT_CTRL2_S2CD_BEN (1 << 7)
> -
> -/* MCT_CTRL3 register */
> -#define MCT_CTRL3_SLOT1_EN (1 << 0)
> -#define MCT_CTRL3_SLOT2_EN (1 << 1)
> -#define MCT_CTRL3_S1_AUTO_EN (1 << 2)
> -#define MCT_CTRL3_S2_AUTO_EN (1 << 3)
> -
> -/* MCT_PIN_ST register */
> -#define MCT_PIN_ST_S1_CD_ST (1 << 0)
> -#define MCT_PIN_ST_S2_CD_ST (1 << 1)
>
> static void menelaus_work(struct work_struct *_menelaus);
>
> diff --git a/include/linux/i2c/menelaus.h b/include/linux/i2c/menelaus.h
> index e1012c1..1660418 100644
> --- a/include/linux/i2c/menelaus.h
> +++ b/include/linux/i2c/menelaus.h
> @@ -7,6 +7,118 @@
> #ifndef __ASM_ARCH_MENELAUS_H
> #define __ASM_ARCH_MENELAUS_H
>
> +#define MENELAUS_I2C_ADDRESS 0x72
> +
> +#define MENELAUS_REV 0x01
> +#define MENELAUS_VCORE_CTRL1 0x02
> +#define MENELAUS_VCORE_CTRL2 0x03
> +#define MENELAUS_VCORE_CTRL3 0x04
> +#define MENELAUS_VCORE_CTRL4 0x05
> +#define MENELAUS_VCORE_CTRL5 0x06
> +#define MENELAUS_DCDC_CTRL1 0x07
> +#define MENELAUS_DCDC_CTRL2 0x08
> +#define MENELAUS_DCDC_CTRL3 0x09
> +#define MENELAUS_LDO_CTRL1 0x0A
> +#define MENELAUS_LDO_CTRL2 0x0B
> +#define MENELAUS_LDO_CTRL3 0x0C
> +#define MENELAUS_LDO_CTRL4 0x0D
> +#define MENELAUS_LDO_CTRL5 0x0E
> +#define MENELAUS_LDO_CTRL6 0x0F
> +#define MENELAUS_LDO_CTRL7 0x10
> +#define MENELAUS_LDO_CTRL8 0x11
> +#define MENELAUS_SLEEP_CTRL1 0x12
> +#define MENELAUS_SLEEP_CTRL2 0x13
> +#define MENELAUS_DEVICE_OFF 0x14
> +#define MENELAUS_OSC_CTRL 0x15
> +#define MENELAUS_DETECT_CTRL 0x16
> +#define MENELAUS_INT_MASK1 0x17
> +#define MENELAUS_INT_MASK2 0x18
> +#define MENELAUS_INT_STATUS1 0x19
> +#define MENELAUS_INT_STATUS2 0x1A
> +#define MENELAUS_INT_ACK1 0x1B
> +#define MENELAUS_INT_ACK2 0x1C
> +#define MENELAUS_GPIO_CTRL 0x1D
> +#define MENELAUS_GPIO_IN 0x1E
> +#define MENELAUS_GPIO_OUT 0x1F
> +#define MENELAUS_BBSMS 0x20
> +#define MENELAUS_RTC_CTRL 0x21
> +#define MENELAUS_RTC_UPDATE 0x22
> +#define MENELAUS_RTC_SEC 0x23
> +#define MENELAUS_RTC_MIN 0x24
> +#define MENELAUS_RTC_HR 0x25
> +#define MENELAUS_RTC_DAY 0x26
> +#define MENELAUS_RTC_MON 0x27
> +#define MENELAUS_RTC_YR 0x28
> +#define MENELAUS_RTC_WKDAY 0x29
> +#define MENELAUS_RTC_AL_SEC 0x2A
> +#define MENELAUS_RTC_AL_MIN 0x2B
> +#define MENELAUS_RTC_AL_HR 0x2C
> +#define MENELAUS_RTC_AL_DAY 0x2D
> +#define MENELAUS_RTC_AL_MON 0x2E
> +#define MENELAUS_RTC_AL_YR 0x2F
> +#define MENELAUS_RTC_COMP_MSB 0x30
> +#define MENELAUS_RTC_COMP_LSB 0x31
> +#define MENELAUS_S1_PULL_EN 0x32
> +#define MENELAUS_S1_PULL_DIR 0x33
> +#define MENELAUS_S2_PULL_EN 0x34
> +#define MENELAUS_S2_PULL_DIR 0x35
> +#define MENELAUS_MCT_CTRL1 0x36
> +#define MENELAUS_MCT_CTRL2 0x37
> +#define MENELAUS_MCT_CTRL3 0x38
> +#define MENELAUS_MCT_PIN_ST 0x39
> +#define MENELAUS_DEBOUNCE1 0x3A
> +
> +#define IH_MENELAUS_IRQS 12
> +#define MENELAUS_MMC_S1CD_IRQ 0 /* MMC slot 1 card change */
> +#define MENELAUS_MMC_S2CD_IRQ 1 /* MMC slot 2 card change */
> +#define MENELAUS_MMC_S1D1_IRQ 2 /* MMC DAT1 low in slot 1 */
> +#define MENELAUS_MMC_S2D1_IRQ 3 /* MMC DAT1 low in slot 2 */
> +#define MENELAUS_LOWBAT_IRQ 4 /* Low battery */
> +#define MENELAUS_HOTDIE_IRQ 5 /* Hot die detect */
> +#define MENELAUS_UVLO_IRQ 6 /* UVLO detect */
> +#define MENELAUS_TSHUT_IRQ 7 /* Thermal shutdown */
> +#define MENELAUS_RTCTMR_IRQ 8 /* RTC timer */
> +#define MENELAUS_RTCALM_IRQ 9 /* RTC alarm */
> +#define MENELAUS_RTCERR_IRQ 10 /* RTC error */
> +#define MENELAUS_PSHBTN_IRQ 11 /* Push button */
> +#define MENELAUS_RESERVED12_IRQ 12 /* Reserved */
> +#define MENELAUS_RESERVED13_IRQ 13 /* Reserved */
> +#define MENELAUS_RESERVED14_IRQ 14 /* Reserved */
> +#define MENELAUS_RESERVED15_IRQ 15 /* Reserved */
> +
> +/* VCORE_CTRL1 register */
> +#define VCORE_CTRL1_BYP_COMP (1 << 5)
> +#define VCORE_CTRL1_HW_NSW (1 << 7)
> +
> +/* GPIO_CTRL register */
> +#define GPIO_CTRL_SLOTSELEN (1 << 5)
> +#define GPIO_CTRL_SLPCTLEN (1 << 6)
> +#define GPIO1_DIR_INPUT (1 << 0)
> +#define GPIO2_DIR_INPUT (1 << 1)
> +#define GPIO3_DIR_INPUT (1 << 2)
> +
> +/* MCT_CTRL1 register */
> +#define MCT_CTRL1_S1_CMD_OD (1 << 2)
> +#define MCT_CTRL1_S2_CMD_OD (1 << 3)
> +
> +/* MCT_CTRL2 register */
> +#define MCT_CTRL2_VS2_SEL_D0 (1 << 0)
> +#define MCT_CTRL2_VS2_SEL_D1 (1 << 1)
> +#define MCT_CTRL2_S1CD_BUFEN (1 << 4)
> +#define MCT_CTRL2_S2CD_BUFEN (1 << 5)
> +#define MCT_CTRL2_S1CD_DBEN (1 << 6)
> +#define MCT_CTRL2_S2CD_BEN (1 << 7)
> +
> +/* MCT_CTRL3 register */
> +#define MCT_CTRL3_SLOT1_EN (1 << 0)
> +#define MCT_CTRL3_SLOT2_EN (1 << 1)
> +#define MCT_CTRL3_S1_AUTO_EN (1 << 2)
> +#define MCT_CTRL3_S2_AUTO_EN (1 << 3)
> +
> +/* MCT_PIN_ST register */
> +#define MCT_PIN_ST_S1_CD_ST (1 << 0)
> +#define MCT_PIN_ST_S2_CD_ST (1 << 1)
> +
> struct device;
>
> struct menelaus_platform_data {
> -- 1.5.5.1
>
>
> _______________________________________________
> i2c mailing list
> i2c-GZX6beZjE8VD60Wz+7aTrA@public.gmane.org
> http://lists.lm-sensors.org/mailman/listinfo/i2c
--
Ben (ben-elnMNo+KYs3YtjvyW6yDsg@public.gmane.org, http://www.fluff.org/)
'a smiley only costs 4 bytes'
_______________________________________________
i2c mailing list
i2c-GZX6beZjE8VD60Wz+7aTrA@public.gmane.org
http://lists.lm-sensors.org/mailman/listinfo/i2c
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2008-08-06 22:41 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2008-08-06 18:01 [PATCH 4/6] I2C: MENELAUS: Move menelaus register map to include/linux/i2c/menelaus.h Carlos Aguiar
[not found] ` <4899E6DD.90909-knKY8vlp0dIIdKJ7tpkyPg@public.gmane.org>
2008-08-06 22:41 ` Ben Dooks
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox