[PATCH 2.6.26.2][RESEND] i2c-i801: SMBus patch for Intel Ibex Peak DeviceIDs

[PATCH 2.6.26.2][RESEND] i2c-i801: SMBus patch for Intel Ibex Peak DeviceIDs

[Seth Heasley]

Resend with proper whitespace.

This patch adds the Intel Ibex Peak (PCH) SMBus Controller DeviceIDs.

Signed-off-by: Seth Heasley <seth.heasley@intel.com>

--- linux-2.6.26.2/drivers/i2c/busses/i2c-i801.c.orig	2008-08-08 11:28:08.000000000 -0700
+++ linux-2.6.26.2/drivers/i2c/busses/i2c-i801.c	2008-08-08 11:32:18.000000000 -0700
@@ -43,6 +43,7 @@
   Tolapai               0x5032     32     hard     yes     yes     yes
   ICH10                 0x3a30     32     hard     yes     yes     yes
   ICH10                 0x3a60     32     hard     yes     yes     yes
+  PCH                   0x3b30     32     hard     yes     yes     yes
 
   Features supported by this driver:
   Software PEC                     no
@@ -592,6 +593,7 @@
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_TOLAPAI_1) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH10_4) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH10_5) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PCH_2) },
 	{ 0, }
 };
 
@@ -615,6 +617,7 @@
 	case PCI_DEVICE_ID_INTEL_TOLAPAI_1:
 	case PCI_DEVICE_ID_INTEL_ICH10_4:
 	case PCI_DEVICE_ID_INTEL_ICH10_5:
+	case PCI_DEVICE_ID_INTEL_PCH_2:
 		i801_features |= FEATURE_I2C_BLOCK_READ;
 		/* fall through */
 	case PCI_DEVICE_ID_INTEL_82801DB_3:
--- linux-2.6.26.2/drivers/i2c/busses/Kconfig.orig	2008-08-08 11:27:52.000000000 -0700
+++ linux-2.6.26.2/drivers/i2c/busses/Kconfig	2008-08-08 11:30:42.000000000 -0700
@@ -182,6 +182,7 @@
 	    ICH9
 	    Tolapai
 	    ICH10
+	    PCH
 
 	  This driver can also be built as a module.  If so, the module
 	  will be called i2c-i801.

Re: [PATCH 2.6.26.2][RESEND] i2c-i801: SMBus patch for Intel Ibex Peak DeviceIDs

[Jean Delvare]

On Mon, 11 Aug 2008 17:02:38 -0700, Seth Heasley wrote:
> Resend with proper whitespace.
> 
> This patch adds the Intel Ibex Peak (PCH) SMBus Controller DeviceIDs.
> 
> Signed-off-by: Seth Heasley <seth.heasley@intel.com>
> 
> --- linux-2.6.26.2/drivers/i2c/busses/i2c-i801.c.orig	2008-08-08 11:28:08.000000000 -0700
> +++ linux-2.6.26.2/drivers/i2c/busses/i2c-i801.c	2008-08-08 11:32:18.000000000 -0700
> @@ -43,6 +43,7 @@
>    Tolapai               0x5032     32     hard     yes     yes     yes
>    ICH10                 0x3a30     32     hard     yes     yes     yes
>    ICH10                 0x3a60     32     hard     yes     yes     yes
> +  PCH                   0x3b30     32     hard     yes     yes     yes
>  
>    Features supported by this driver:
>    Software PEC                     no
> @@ -592,6 +593,7 @@
>  	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_TOLAPAI_1) },
>  	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH10_4) },
>  	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH10_5) },
> +	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PCH_2) },
>  	{ 0, }
>  };
>  
> @@ -615,6 +617,7 @@
>  	case PCI_DEVICE_ID_INTEL_TOLAPAI_1:
>  	case PCI_DEVICE_ID_INTEL_ICH10_4:
>  	case PCI_DEVICE_ID_INTEL_ICH10_5:
> +	case PCI_DEVICE_ID_INTEL_PCH_2:
>  		i801_features |= FEATURE_I2C_BLOCK_READ;
>  		/* fall through */
>  	case PCI_DEVICE_ID_INTEL_82801DB_3:
> --- linux-2.6.26.2/drivers/i2c/busses/Kconfig.orig	2008-08-08 11:27:52.000000000 -0700
> +++ linux-2.6.26.2/drivers/i2c/busses/Kconfig	2008-08-08 11:30:42.000000000 -0700
> @@ -182,6 +182,7 @@
>  	    ICH9
>  	    Tolapai
>  	    ICH10
> +	    PCH
>  
>  	  This driver can also be built as a module.  If so, the module
>  	  will be called i2c-i801.
> 

Looks good, I've added this to my tree. I will have to wait for the PCI
IDs patch to go upstream before I can push it though.


-- 
Jean Delvare