From: Andrew Morton <akpm-de/tnXTf+JLsfHDXvbKv3WD2FQJk+8+b@public.gmane.org>
To: Jean Delvare <khali-PUYAD+kWke1g9hUCZPvPmw@public.gmane.org>
Cc: Martin Schwidefsky
<schwidefsky-tA70FqPdS9bQT0dZR+AlfA@public.gmane.org>,
Heiko-cy1Wll9GaHOsTnJN9+BGXg@public.gmane.org,
Carstens <heiko.carstens-tA70FqPdS9bQT0dZR+AlfA@public.gmane.org>,
i2c-GZX6beZjE8VD60Wz+7aTrA@public.gmane.org
Subject: Re: s390 allmodconfig
Date: Fri, 29 Aug 2008 02:04:09 -0700 [thread overview]
Message-ID: <20080829020409.2880013b.akpm@linux-foundation.org> (raw)
In-Reply-To: <20080829104533.0e65f43a-ig7AzVSIIG7kN2dkZ6Wm7A@public.gmane.org>
On Fri, 29 Aug 2008 10:45:33 +0200 Jean Delvare <khali-PUYAD+kWke1g9hUCZPvPmw@public.gmane.org> wrote:
> Hi Andrew,
>
> On Fri, 29 Aug 2008 00:52:17 -0700, Andrew Morton wrote:
> > drivers/i2c/busses/i2c-ocores.c: In function 'oc_setreg':
> > drivers/i2c/busses/i2c-ocores.c:68: error: implicit declaration of function 'iowrite8'
> > drivers/i2c/busses/i2c-ocores.c: In function 'oc_getreg':
> > drivers/i2c/busses/i2c-ocores.c:73: error: implicit declaration of function 'ioread8'
> > drivers/i2c/busses/i2c-ocores.c: In function 'ocores_i2c_probe':
> > drivers/i2c/busses/i2c-ocores.c:243: error: implicit declaration of function 'ioremap'
> > drivers/i2c/busses/i2c-ocores.c:243: warning: assignment makes pointer from integer without a cast
> > drivers/i2c/busses/i2c-ocores.c:279: error: implicit declaration of function 'iounmap'
> >
> > Some missing Kconfig dependency. s390 can't do IO :)
>
> Where is this failure happening? In Linus' tree, I2C depends on
> HAS_IOMEM (which s390 doesn't have), and I2C_OCORES depends on I2C. So
> I fail to see how a make allmodconfig can select I2C_OCORES on s390.
> Can you share the .config file?
>
<bisects>
It's
power-support-for-texas-instruments-bq27x00-battery-managers.patch,
which does
--- a/drivers/power/Kconfig~power-support-for-texas-instruments-bq27x00-battery-managers
+++ a/drivers/power/Kconfig
@@ -62,4 +62,17 @@ config BATTERY_PALMTX
help
Say Y to enable support for the battery in Palm T|X.
+config BATTERY_BQ27x00
+ tristate "BQ27x00 battery driver"
+ help
+ Say Y here to enable support for batteries with BQ27000 or
+ BQ27200 chip.
+
+config BATTERY_BQ27200
+ bool "BQ27200 battery driver"
+ depends on BATTERY_BQ27x00
+ select I2C
+ help
+ Say Y here to enable support for batteries with BQ27200(I2C) chip.
+
which enables I2C stuff in s390 allmodconfig. Should it be `depends on'?
_______________________________________________
i2c mailing list
i2c-GZX6beZjE8VD60Wz+7aTrA@public.gmane.org
http://lists.lm-sensors.org/mailman/listinfo/i2c
next prev parent reply other threads:[~2008-08-29 9:04 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-08-29 7:52 s390 allmodconfig Andrew Morton
[not found] ` <20080829005217.509a6c23.akpm-de/tnXTf+JLsfHDXvbKv3WD2FQJk+8+b@public.gmane.org>
2008-08-29 8:45 ` Jean Delvare
[not found] ` <20080829104533.0e65f43a-ig7AzVSIIG7kN2dkZ6Wm7A@public.gmane.org>
2008-08-29 9:04 ` Andrew Morton [this message]
[not found] ` <20080829020409.2880013b.akpm-de/tnXTf+JLsfHDXvbKv3WD2FQJk+8+b@public.gmane.org>
2008-08-29 9:09 ` Rodolfo Giometti
2008-08-29 10:47 ` Jean Delvare
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20080829020409.2880013b.akpm@linux-foundation.org \
--to=akpm-de/tnxtf+jlsfhdxvbkv3wd2fqjk+8+b@public.gmane.org \
--cc=Heiko-cy1Wll9GaHOsTnJN9+BGXg@public.gmane.org \
--cc=heiko.carstens-tA70FqPdS9bQT0dZR+AlfA@public.gmane.org \
--cc=i2c-GZX6beZjE8VD60Wz+7aTrA@public.gmane.org \
--cc=khali-PUYAD+kWke1g9hUCZPvPmw@public.gmane.org \
--cc=schwidefsky-tA70FqPdS9bQT0dZR+AlfA@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox