From: Tony Lindgren <tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org>
To: i2c-GZX6beZjE8VD60Wz+7aTrA@public.gmane.org,
Ben Dooks <ben-linux-elnMNo+KYs3YtjvyW6yDsg@public.gmane.org>
Subject: [PATCH 9/8] i2c-omap: fix I2C timeouts due to recursive omap_i2c_{un, }idle()
Date: Fri, 17 Oct 2008 08:47:08 -0700 [thread overview]
Message-ID: <20081017154708.GO15820@atomide.com> (raw)
In-Reply-To: <1222329234-31473-9-git-send-email-tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org>
[-- Attachment #1: Type: text/plain, Size: 105 bytes --]
Hi,
Here's one more new patch to fix a nasty I2C timeout bug that
showed up at least on omap34xx.
Tony
[-- Attachment #2: 0009-i2c-omap-fix-I2C-timeouts-due-to-recursive-omap_i2c.patch --]
[-- Type: text/x-diff, Size: 2796 bytes --]
>From b3016ed8b0105a3c4447cc93434d988fd0ad29d6 Mon Sep 17 00:00:00 2001
From: Paul Walmsley <paul-DWxLp4Yu+b8AvxtiuMwx3w@public.gmane.org>
Date: Fri, 17 Oct 2008 08:42:54 -0700
Subject: [PATCH] i2c-omap: fix I2C timeouts due to recursive omap_i2c_{un,}idle()
omap_i2c_unidle() and omap_i2c_idle() are called recursively during
omap_i2c_probe(). This is evidently unexpected and will wipe
out the I2C interrupt enable register the second time that
omap_i2c_idle() is called consecutively. Any I2C transactions
following a probe of a bus with at least one device on it will then
time out.
Fix by moving omap_i2c_idle() further up in omap_i2c_probe(). Ensure
the I2C controller is marked as idle before the probe starts. Also
attempt to catch future reappearances of this bug early in development
by warning in omap_i2c_{un,}idle() when they are called recursively.
Problem reported by David Brownell <david-b-yBeKhBN/0LDR7s880joybQ@public.gmane.org>.
Tested on 3430SDP and 2430SDP.
Signed-off-by: Paul Walmsley <paul-DWxLp4Yu+b8AvxtiuMwx3w@public.gmane.org>
Cc: David Brownell <david-b-yBeKhBN/0LDR7s880joybQ@public.gmane.org>
Cc: Richard Woodruff <r-woodruff2-l0cyMroinI0@public.gmane.org>
Acked-by; Steve Sakoman <steve-4Uf0gMDude1BDgjK7y7TUQ@public.gmane.org>
Signed-off-by: Tony Lindgren <tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org>
---
drivers/i2c/busses/i2c-omap.c | 9 +++++++--
1 files changed, 7 insertions(+), 2 deletions(-)
diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c
index 17166a2..363335e 100644
--- a/drivers/i2c/busses/i2c-omap.c
+++ b/drivers/i2c/busses/i2c-omap.c
@@ -191,6 +191,8 @@ static void omap_i2c_put_clocks(struct omap_i2c_dev *dev)
static void omap_i2c_unidle(struct omap_i2c_dev *dev)
{
+ WARN_ON(!dev->idle);
+
if (dev->iclk != NULL)
clk_enable(dev->iclk);
clk_enable(dev->fclk);
@@ -203,6 +205,8 @@ static void omap_i2c_idle(struct omap_i2c_dev *dev)
{
u16 iv;
+ WARN_ON(dev->idle);
+
dev->iestate = omap_i2c_read_reg(dev, OMAP_I2C_IE_REG);
omap_i2c_write_reg(dev, OMAP_I2C_IE_REG, 0);
if (dev->rev1)
@@ -743,6 +747,7 @@ omap_i2c_probe(struct platform_device *pdev)
*speed = 100; /* Defualt speed */
dev->speed = *speed;
+ dev->idle = 1;
dev->dev = &pdev->dev;
dev->irq = irq->start;
dev->base = ioremap(mem->start, mem->end - mem->start + 1);
@@ -791,6 +796,8 @@ omap_i2c_probe(struct platform_device *pdev)
dev_info(dev->dev, "bus %d rev%d.%d at %d kHz\n",
pdev->id, r >> 4, r & 0xf, dev->speed);
+ omap_i2c_idle(dev);
+
adap = &dev->adapter;
i2c_set_adapdata(adap, dev);
adap->owner = THIS_MODULE;
@@ -807,8 +814,6 @@ omap_i2c_probe(struct platform_device *pdev)
goto err_free_irq;
}
- omap_i2c_idle(dev);
-
return 0;
err_free_irq:
--
1.5.6.rc3.21.g8c6b5
[-- Attachment #3: Type: text/plain, Size: 157 bytes --]
_______________________________________________
i2c mailing list
i2c-GZX6beZjE8VD60Wz+7aTrA@public.gmane.org
http://lists.lm-sensors.org/mailman/listinfo/i2c
next prev parent reply other threads:[~2008-10-17 15:47 UTC|newest]
Thread overview: 34+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-09-25 7:53 [PATCH 0/8] Updates for i2c-omap from linux-omap tree for review, v2 Tony Lindgren
2008-09-25 7:53 ` [PATCH 1/8] i2c-omap: Do not use interruptible wait call in omap_i2c_xfer_msg Tony Lindgren
2008-09-25 7:53 ` [PATCH 2/8] i2c-omap: Close suspected race between omap_i2c_idle() and omap_i2c_isr() Tony Lindgren
2008-09-25 7:53 ` [PATCH 3/8] i2c-omap: Add high-speed support to omap-i2c Tony Lindgren
2008-09-25 7:53 ` [PATCH 4/8] i2c-omap: FIFO handling support and broken hw workaround for i2c-omap Tony Lindgren
2008-09-25 7:53 ` [PATCH 5/8] i2c-omap: Add support on 34xx Tony Lindgren
2008-09-25 7:53 ` [PATCH 6/8] i2c-omap: Mark init-only functions as __init Tony Lindgren
2008-09-25 7:53 ` [PATCH 7/8] i2c-omap: Don't compile in OMAP15xx I2C ISR for non-OMAP15xx builds Tony Lindgren
2008-09-25 7:53 ` [PATCH 8/8] i2c-omap: Clean-up i2c-omap Tony Lindgren
2008-09-25 11:40 ` [PATCH 8/8] i2c-omap: Clean-up i2c-omap, v3 Tony Lindgren
2008-09-29 22:31 ` [i2c] [PATCH 8/8] i2c-omap: Clean-up i2c-omap Ben Dooks
2008-10-17 15:41 ` Tony Lindgren
[not found] ` <1222329234-31473-9-git-send-email-tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org>
2008-10-17 15:47 ` Tony Lindgren [this message]
2008-09-29 22:29 ` [i2c] [PATCH 7/8] i2c-omap: Don't compile in OMAP15xx I2C ISR for non-OMAP15xx builds Ben Dooks
2008-09-29 23:06 ` David Brownell
2008-09-30 5:35 ` Paul Walmsley
2008-09-30 5:36 ` Paul Walmsley
2008-10-17 15:40 ` Tony Lindgren
2008-09-29 22:30 ` [i2c] [PATCH 6/8] i2c-omap: Mark init-only functions as __init Ben Dooks
2008-10-17 15:39 ` Tony Lindgren
2008-10-17 17:07 ` Tony Lindgren
2008-09-29 22:28 ` [i2c] [PATCH 5/8] i2c-omap: Add support on 34xx Ben Dooks
2008-10-17 15:38 ` Tony Lindgren
2008-09-25 11:39 ` [PATCH 4/8] i2c-omap: FIFO handling support and broken hw workaround for i2c-omap, v3 Tony Lindgren
2008-09-29 22:27 ` [i2c] [PATCH 4/8] i2c-omap: FIFO handling support and broken hw workaround for i2c-omap Ben Dooks
2008-09-29 22:25 ` [i2c] [PATCH 3/8] i2c-omap: Add high-speed support to omap-i2c Ben Dooks
2008-10-17 15:37 ` Tony Lindgren
2008-09-29 22:21 ` [i2c] [PATCH 2/8] i2c-omap: Close suspected race between omap_i2c_idle() and omap_i2c_isr() Ben Dooks
2008-09-29 22:21 ` [i2c] [PATCH 1/8] i2c-omap: Do not use interruptible wait call in omap_i2c_xfer_msg Ben Dooks
2008-09-30 11:51 ` Jarkko Nikula
2008-10-17 15:35 ` Tony Lindgren
2008-09-29 22:23 ` [i2c] [PATCH 0/8] Updates for i2c-omap from linux-omap tree for review, v2 Ben Dooks
2008-09-30 5:35 ` Tony Lindgren
2008-10-17 16:04 ` git-pull request for i2c-omap changes (Re: [i2c] [PATCH 0/8] Updates for i2c-omap from linux-omap tree for review, v2) Tony Lindgren
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20081017154708.GO15820@atomide.com \
--to=tony-4v6ys6ai5vpbdgjk7y7tuq@public.gmane.org \
--cc=ben-linux-elnMNo+KYs3YtjvyW6yDsg@public.gmane.org \
--cc=i2c-GZX6beZjE8VD60Wz+7aTrA@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox