public inbox for linux-i2c@vger.kernel.org
 help / color / mirror / Atom feed
From: Ben Dooks <ben-linux-elnMNo+KYs3YtjvyW6yDsg@public.gmane.org>
To: Jon Smirl <jonsmirl-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Cc: i2c-GZX6beZjE8VD60Wz+7aTrA@public.gmane.org
Subject: Re: [PATCH] i2c driver for Maxim max9485 audio clock	generator chip
Date: Tue, 21 Oct 2008 09:45:16 +0100	[thread overview]
Message-ID: <20081021084516.GA764@fluff.org.uk> (raw)
In-Reply-To: <20081021030205.2494.55081.stgit@terra>

On Mon, Oct 20, 2008 at 11:02:05PM -0400, Jon Smirl wrote:
> Signed-off-by: Jon Smirl <jonsmirl-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
> ---
>  drivers/i2c/chips/Kconfig   |    9 ++++
>  drivers/i2c/chips/Makefile  |    1 
>  drivers/i2c/chips/max9485.c |  106 +++++++++++++++++++++++++++++++++++++++++++
>  include/linux/i2c/max9485.h |   38 +++++++++++++++
>  4 files changed, 154 insertions(+), 0 deletions(-)
>  create mode 100644 drivers/i2c/chips/max9485.c
>  create mode 100644 include/linux/i2c/max9485.h
> 
> diff --git a/drivers/i2c/chips/Kconfig b/drivers/i2c/chips/Kconfig
> index 1735682..bc2a6d3 100644
> --- a/drivers/i2c/chips/Kconfig
> +++ b/drivers/i2c/chips/Kconfig
> @@ -40,6 +40,15 @@ config AT24
>  	  This driver can also be built as a module.  If so, the module
>  	  will be called at24.
>  
> +config MAX9485
> +	tristate "Maxim MAX9485 Programmable Audio Clock Generator"
> +	help
> +	  If you say yes here you get support for Maxim MAX9485 
> +	  Programmable Audio Clock Generator.
> +
> +	  This driver can also be built as a module.  If so, the module
> +	  will be called max9485.
> +
>  config SENSORS_EEPROM
>  	tristate "EEPROM reader"
>  	depends on EXPERIMENTAL
> diff --git a/drivers/i2c/chips/Makefile b/drivers/i2c/chips/Makefile
> index ca520fa..1560baf 100644
> --- a/drivers/i2c/chips/Makefile
> +++ b/drivers/i2c/chips/Makefile
> @@ -11,6 +11,7 @@
>  
>  obj-$(CONFIG_DS1682)		+= ds1682.o
>  obj-$(CONFIG_AT24)		+= at24.o
> +obj-$(CONFIG_MAX9485)		+= max9485.o
>  obj-$(CONFIG_SENSORS_EEPROM)	+= eeprom.o
>  obj-$(CONFIG_SENSORS_MAX6875)	+= max6875.o
>  obj-$(CONFIG_SENSORS_PCA9539)	+= pca9539.o
> diff --git a/drivers/i2c/chips/max9485.c b/drivers/i2c/chips/max9485.c
> new file mode 100644
> index 0000000..65058b4
> --- /dev/null
> +++ b/drivers/i2c/chips/max9485.c
> @@ -0,0 +1,106 @@
> +/*
> + * Maxim max9485 Programmable Audio Clock Generator driver
> + *
> + * Written by: Jon Smirl <jonsmirl-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
> + *
> + * Copyright (C) Digispeaker.com

you need a date at which you are claiming the copyright. I'd also
check that (C) in a big symbol is a legally recognised substitute
for an small c in an circle.

-- 
Ben (ben-elnMNo+KYs3YtjvyW6yDsg@public.gmane.org, http://www.fluff.org/)

  'a smiley only costs 4 bytes'

_______________________________________________
i2c mailing list
i2c-GZX6beZjE8VD60Wz+7aTrA@public.gmane.org
http://lists.lm-sensors.org/mailman/listinfo/i2c

      parent reply	other threads:[~2008-10-21  8:45 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2008-10-21  3:02 [PATCH] i2c driver for Maxim max9485 audio clock generator chip Jon Smirl
2008-10-21  8:36 ` Jean Delvare
     [not found]   ` <20081021103607.78ffb4da-ig7AzVSIIG7kN2dkZ6Wm7A@public.gmane.org>
2008-10-21 23:57     ` Jon Smirl
     [not found]       ` <9e4733910810211657s5e25e391p5ca6e6f672d115c5-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2008-10-22  6:38         ` Jean Delvare
     [not found]           ` <20081022083847.5216472c-ig7AzVSIIG7kN2dkZ6Wm7A@public.gmane.org>
2008-10-22 16:38             ` Jon Smirl
2008-10-21  8:45 ` Ben Dooks [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20081021084516.GA764@fluff.org.uk \
    --to=ben-linux-elnmno+kys3ytjvyw6ydsg@public.gmane.org \
    --cc=i2c-GZX6beZjE8VD60Wz+7aTrA@public.gmane.org \
    --cc=jonsmirl-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox