From: Ben Dooks <ben-linux-elnMNo+KYs3YtjvyW6yDsg@public.gmane.org>
To: linux-i2c-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Cc: Ben Dooks <ben-linux-elnMNo+KYs3YtjvyW6yDsg@public.gmane.org>
Subject: [patch 9/9] i2c-s3c2410: change IRQ to be plain integer.
Date: Fri, 31 Oct 2008 16:04:29 +0000 [thread overview]
Message-ID: <20081031160438.463707180@fluff.org.uk> (raw)
In-Reply-To: 20081031160420.164160051@fluff.org.uk
[-- Attachment #1: simtec/s3c64xx/i2c-improve-irq-code.patch --]
[-- Type: text/plain, Size: 2385 bytes --]
Change the code to use a plain integer as the holder
for the IRQ for the device and use platform_get_irq()
to find it.
This makes the code slightly neater, and easier to get
the IRQ number.
Signed-off-by: Ben Dooks <ben-linux-elnMNo+KYs3YtjvyW6yDsg@public.gmane.org>
Index: linux.git/drivers/i2c/busses/i2c-s3c2410.c
===================================================================
--- linux.git.orig/drivers/i2c/busses/i2c-s3c2410.c 2008-10-31 11:56:12.000000000 +0000
+++ linux.git/drivers/i2c/busses/i2c-s3c2410.c 2008-10-31 11:56:18.000000000 +0000
@@ -62,6 +62,7 @@ struct s3c24xx_i2c {
unsigned int msg_ptr;
unsigned int tx_setup;
+ unsigned int irq;
enum s3c24xx_i2c_state state;
unsigned long clkrate;
@@ -69,7 +70,6 @@ struct s3c24xx_i2c {
void __iomem *regs;
struct clk *clk;
struct device *dev;
- struct resource *irq;
struct resource *ioarea;
struct i2c_adapter adap;
@@ -870,26 +870,20 @@ static int s3c24xx_i2c_probe(struct plat
* ensure no current IRQs pending
*/
- res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
- if (res == NULL) {
+ i2c->irq = ret = platform_get_irq(pdev, 0);
+ if (ret <= 0) {
dev_err(&pdev->dev, "cannot find IRQ\n");
- ret = -ENOENT;
goto err_iomap;
}
- ret = request_irq(res->start, s3c24xx_i2c_irq, IRQF_DISABLED,
- pdev->name, i2c);
+ ret = request_irq(i2c->irq, s3c24xx_i2c_irq, IRQF_DISABLED,
+ dev_name(&pdev->dev), i2c);
if (ret != 0) {
- dev_err(&pdev->dev, "cannot claim IRQ\n");
+ dev_err(&pdev->dev, "cannot claim IRQ %d\n", i2c->irq);
goto err_iomap;
}
- i2c->irq = res;
-
- dev_dbg(&pdev->dev, "irq resource %p (%lu)\n", res,
- (unsigned long)res->start);
-
ret = s3c24xx_i2c_register_cpufreq(i2c);
if (ret < 0) {
dev_err(&pdev->dev, "failed to register cpufreq notifier\n");
@@ -919,7 +913,7 @@ static int s3c24xx_i2c_probe(struct plat
s3c24xx_i2c_deregister_cpufreq(i2c);
err_irq:
- free_irq(i2c->irq->start, i2c);
+ free_irq(i2c->irq, i2c);
err_iomap:
iounmap(i2c->regs);
@@ -949,7 +943,7 @@ static int s3c24xx_i2c_remove(struct pla
s3c24xx_i2c_deregister_cpufreq(i2c);
i2c_del_adapter(&i2c->adap);
- free_irq(i2c->irq->start, i2c);
+ free_irq(i2c->irq, i2c);
clk_disable(i2c->clk);
clk_put(i2c->clk);
--
Ben (ben-elnMNo+KYs3YtjvyW6yDsg@public.gmane.org, http://www.fluff.org/)
'a smiley only costs 4 bytes'
prev parent reply other threads:[~2008-10-31 16:04 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-10-31 16:04 [patch 0/9] I2C patches for S3C24XX Ben Dooks
2008-10-31 16:04 ` [patch 1/9] i2c-s3c2410: fix check for being in suspend Ben Dooks
2008-10-31 16:04 ` [patch 2/9] i2c-s3c2410: Use <linux/io.h> over <asm/io.h> Ben Dooks
2008-10-31 16:04 ` [patch 3/9] i2c-s3c2410: fixup style problems from checkpatch.pl Ben Dooks
2008-10-31 16:04 ` [patch 4/9] i2c-s3c2410: use platform data for gpio configuration Ben Dooks
2008-10-31 16:04 ` [patch 5/9] i2c-s3c2410: Add ARCH_S3C64XX to allowed archs Ben Dooks
2008-10-31 16:04 ` [patch 6/9] i2c-s3c2410: remove default platform data Ben Dooks
2008-10-31 16:04 ` [patch 7/9] i2c-s3c2410: Allow more than one i2c-s3c2410 adapter Ben Dooks
2008-10-31 16:04 ` [patch 8/9] S3C: Add i2c1 device definition Ben Dooks
2008-10-31 16:04 ` Ben Dooks [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20081031160438.463707180@fluff.org.uk \
--to=ben-linux-elnmno+kys3ytjvyw6ydsg@public.gmane.org \
--cc=linux-i2c-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox