From: Jean Delvare <khali-PUYAD+kWke1g9hUCZPvPmw@public.gmane.org>
To: David Brownell <david-b-yBeKhBN/0LDR7s880joybQ@public.gmane.org>
Cc: Linux I2C <linux-i2c-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>,
lm-sensors-GZX6beZjE8VD60Wz+7aTrA@public.gmane.org
Subject: Re: [patch 2.6.27-rc7] i2c: smbalert# support
Date: Tue, 18 Nov 2008 09:15:46 +0100 [thread overview]
Message-ID: <20081118091546.421d6b78@hyperion.delvare> (raw)
In-Reply-To: <200809231532.40083.david-b-yBeKhBN/0LDR7s880joybQ@public.gmane.org>
Hi Dave,
On Tue, 23 Sep 2008 15:32:39 -0700, David Brownell wrote:
> From: David Brownell <dbrownell-Rn4VEauK+AKRv+LV9MX5uipxlwaOVQ5f@public.gmane.org>
>
> Infrastructure supporting SMBALERT# interrupts and the related SMBus
> protocols. These are defined as "optional" by the SMBus spec.
>
> - The i2c_adapter now includes a work_struct doing the work of talking
> to the Alert Response Address until nobody responds any more (and
> hence the IRQ is no longer asserted). Follows SMBus 2.0 not 1.1;
> there seems to be no point in trying to handle ten-bit addresses.
>
> - Some of the ways that work_struct could be driven:
>
> * Adapter driver provides an IRQ, which is bound to a handler
> which schedules that work_struct (using keventd for now).
> NOTE: it's nicest if this is edge triggered, but the code
> should handle level triggered IRQs too.
>
> * Adapter driver schedules that work struct itself, maybe even
> on a workqueue of its own. It asks the core to set it up by
> setting i2c_adapter.do_setup_alert ... SMBALERT# could be a
> subcase of the adapter's normal interrupt handler. (Or, some
> boards may want to use polling.)
>
> - The "i2c-gpio" driver now handles an optional named resource for
> that SMBus alert signal. Named since, when this is substituted
> for a misbehaving "native" driver, positional ids should be left
> alone. (It might be better to put this logic into i2c core, to
> apply whenever the i2c_adapter.dev.parent is a platform device.)
>
> - There's a new driver method used to report that a given device has
> issued an alert. Its parameter includes the one bit of information
> provided by the device in its alert response message.
>
> The IRQ driven code path is always enabled, if it's available.
>
> Signed-off-by: David Brownell <dbrownell-Rn4VEauK+AKRv+LV9MX5uipxlwaOVQ5f@public.gmane.org>
I guess it's about time that I review this patch and merge it. Is this
still the latest version of your code, or do you have anything more
recent?
Thanks,
--
Jean Delvare
next prev parent reply other threads:[~2008-11-18 8:15 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <200804161434.54335.laurentp@cse-semaphore.com>
[not found] ` <20080416153043.02f89554@hyperion.delvare>
[not found] ` <200804161027.49943.david-b@pacbell.net>
[not found] ` <200804161027.49943.david-b-yBeKhBN/0LDR7s880joybQ@public.gmane.org>
2008-05-02 11:10 ` [patch 2.6.25-git] i2c: smbalert# support David Brownell
[not found] ` <200805020410.44723.david-b-yBeKhBN/0LDR7s880joybQ@public.gmane.org>
2008-05-05 5:56 ` [patch 2.6.265-rc1] " David Brownell
[not found] ` <200805042256.49252.david-b-yBeKhBN/0LDR7s880joybQ@public.gmane.org>
2008-09-23 22:32 ` [patch 2.6.27-rc7] " David Brownell
[not found] ` <200809231532.40083.david-b-yBeKhBN/0LDR7s880joybQ@public.gmane.org>
2008-09-26 1:07 ` [lm-sensors] " Trent Piepho
[not found] ` <Pine.LNX.4.64.0809251728130.7680-3bmvVOk6DZ+DGx/iekXGtrjh7zpefjiS@public.gmane.org>
2008-09-26 2:01 ` David Brownell
[not found] ` <200809251902.00201.david-b-yBeKhBN/0LDR7s880joybQ@public.gmane.org>
2008-09-27 0:29 ` Trent Piepho
[not found] ` <Pine.LNX.4.64.0809261652040.7680-3bmvVOk6DZ+DGx/iekXGtrjh7zpefjiS@public.gmane.org>
2008-10-17 19:04 ` David Brownell
[not found] ` <200810171204.54448.david-b-yBeKhBN/0LDR7s880joybQ@public.gmane.org>
2008-10-17 20:43 ` Trent Piepho
2008-11-18 8:15 ` Jean Delvare [this message]
[not found] ` <20081118091546.421d6b78-ig7AzVSIIG7kN2dkZ6Wm7A@public.gmane.org>
2008-11-18 22:01 ` David Brownell
[not found] ` <200811181401.34809.david-b-yBeKhBN/0LDR7s880joybQ@public.gmane.org>
2008-11-19 9:51 ` [lm-sensors] " Trent Piepho
[not found] ` <Pine.LNX.4.64.0811190140510.11673-3bmvVOk6DZ+DGx/iekXGtrjh7zpefjiS@public.gmane.org>
2008-11-19 15:16 ` Jean Delvare
[not found] ` <20081119161632.2d0bde9e-ig7AzVSIIG7kN2dkZ6Wm7A@public.gmane.org>
2008-11-20 22:00 ` Trent Piepho
[not found] ` <Pine.LNX.4.64.0811201354310.11673-3bmvVOk6DZ+DGx/iekXGtrjh7zpefjiS@public.gmane.org>
2008-11-20 22:56 ` David Brownell
[not found] ` <200811201456.36551.david-b-yBeKhBN/0LDR7s880joybQ@public.gmane.org>
2008-11-22 0:55 ` Trent Piepho
[not found] ` <Pine.LNX.4.64.0811211621340.18022-3bmvVOk6DZ+DGx/iekXGtrjh7zpefjiS@public.gmane.org>
2008-11-22 2:58 ` David Brownell
2008-11-21 8:42 ` Jean Delvare
[not found] ` <20081121094218.34ecd82a-ig7AzVSIIG7kN2dkZ6Wm7A@public.gmane.org>
2008-11-22 6:04 ` Trent Piepho
[not found] ` <Pine.LNX.4.64.0811212122370.18022-3bmvVOk6DZ+DGx/iekXGtrjh7zpefjiS@public.gmane.org>
2008-11-22 10:13 ` Jean Delvare
[not found] ` <20081122111340.0bfc2c05-ig7AzVSIIG7kN2dkZ6Wm7A@public.gmane.org>
2008-11-22 20:28 ` Trent Piepho
[not found] ` <Pine.LNX.4.64.0811221055470.18022-3bmvVOk6DZ+DGx/iekXGtrjh7zpefjiS@public.gmane.org>
2008-11-23 21:45 ` Jean Delvare
2008-11-19 13:57 ` Jean Delvare
[not found] ` <20081119145712.1abaa63f-ig7AzVSIIG7kN2dkZ6Wm7A@public.gmane.org>
2008-11-19 18:08 ` David Brownell
2008-11-21 14:18 ` Jean Delvare
[not found] ` <20081121151808.324ca78c-ig7AzVSIIG7kN2dkZ6Wm7A@public.gmane.org>
2008-11-21 16:24 ` David Brownell
[not found] ` <200811210824.55601.david-b-yBeKhBN/0LDR7s880joybQ@public.gmane.org>
2008-11-21 19:22 ` Jean Delvare
[not found] ` <20081121202223.0261fb9c-ig7AzVSIIG7kN2dkZ6Wm7A@public.gmane.org>
2008-11-21 21:54 ` David Brownell
[not found] ` <200811211354.51501.david-b-yBeKhBN/0LDR7s880joybQ@public.gmane.org>
2008-11-22 9:03 ` Jean Delvare
[not found] ` <20081122100344.61cf42b7-ig7AzVSIIG7kN2dkZ6Wm7A@public.gmane.org>
2008-11-22 9:48 ` David Brownell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20081118091546.421d6b78@hyperion.delvare \
--to=khali-puyad+kwke1g9huczpvpmw@public.gmane.org \
--cc=david-b-yBeKhBN/0LDR7s880joybQ@public.gmane.org \
--cc=linux-i2c-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=lm-sensors-GZX6beZjE8VD60Wz+7aTrA@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox