From: Ben Dooks <ben-linux-elnMNo+KYs3YtjvyW6yDsg@public.gmane.org>
To: Ben Dooks <ben-linux-elnMNo+KYs3YtjvyW6yDsg@public.gmane.org>
Cc: linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-i2c-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
dbrownell-Rn4VEauK+AKRv+LV9MX5uipxlwaOVQ5f@public.gmane.org
Subject: Re: GPIO: Fix probe() error return in gpio driver probes
Date: Sun, 14 Dec 2008 21:33:49 +0000 [thread overview]
Message-ID: <20081214213349.GA19483@fluff.org.uk> (raw)
In-Reply-To: <20081212152426.745254309-elnMNo+KYs3pIgCt6eIbzw@public.gmane.org>
On Fri, Dec 12, 2008 at 03:24:27PM +0000, Ben Dooks wrote:
> A number of drivers in drivers/gpio return -ENODEV when confronted
> with missing setup parameters such as the platform data. However,
> returning -ENODEV causes the driver layer to silently ignore the
> driver as it assumes the probe did not find anything and was only
> speculative.
>
> To make life easier to discern why a driver is not being attached,
> change to returning -EINVAL, which is a better description of the
> fact that the driver data was not valid.
>
> Signed-off-by: Ben Dooks <ben-linux-elnMNo+KYs3YtjvyW6yDsg@public.gmane.org>
Has anyone reveiwed this patch? Are there any comments, or can this
be commited at somepoint (even if it is during the next merge window)?
> Index: linux.git7/drivers/gpio/max7301.c
> ===================================================================
> --- linux.git7.orig/drivers/gpio/max7301.c 2008-12-12 13:35:42.000000000 +0000
> +++ linux.git7/drivers/gpio/max7301.c 2008-12-12 13:36:12.000000000 +0000
> @@ -218,7 +218,7 @@ static int __devinit max7301_probe(struc
>
> pdata = spi->dev.platform_data;
> if (!pdata || !pdata->base)
> - return -ENODEV;
> + return -EINVAL;
>
> /*
> * bits_per_word cannot be configured in platform data
> Index: linux.git7/drivers/gpio/max732x.c
> ===================================================================
> --- linux.git7.orig/drivers/gpio/max732x.c 2008-12-12 13:36:22.000000000 +0000
> +++ linux.git7/drivers/gpio/max732x.c 2008-12-12 13:36:28.000000000 +0000
> @@ -268,7 +268,7 @@ static int __devinit max732x_probe(struc
>
> pdata = client->dev.platform_data;
> if (pdata == NULL)
> - return -ENODEV;
> + return -EINVAL;
>
> chip = kzalloc(sizeof(struct max732x_chip), GFP_KERNEL);
> if (chip == NULL)
> Index: linux.git7/drivers/gpio/mcp23s08.c
> ===================================================================
> --- linux.git7.orig/drivers/gpio/mcp23s08.c 2008-12-12 14:10:01.000000000 +0000
> +++ linux.git7/drivers/gpio/mcp23s08.c 2008-12-12 14:11:19.000000000 +0000
> @@ -311,7 +311,7 @@ static int mcp23s08_probe(struct spi_dev
>
> pdata = spi->dev.platform_data;
> if (!pdata || !gpio_is_valid(pdata->base))
> - return -ENODEV;
> + return -EINVAL;
>
> for (addr = 0; addr < 4; addr++) {
> if (!pdata->chip[addr].is_present)
> Index: linux.git7/drivers/gpio/pca953x.c
> ===================================================================
> --- linux.git7.orig/drivers/gpio/pca953x.c 2008-12-12 13:33:47.000000000 +0000
> +++ linux.git7/drivers/gpio/pca953x.c 2008-12-12 13:33:55.000000000 +0000
> @@ -201,7 +201,7 @@ static int __devinit pca953x_probe(struc
>
> pdata = client->dev.platform_data;
> if (pdata == NULL)
> - return -ENODEV;
> + return -EINVAL;
>
> chip = kzalloc(sizeof(struct pca953x_chip), GFP_KERNEL);
> if (chip == NULL)
> Index: linux.git7/drivers/gpio/pcf857x.c
> ===================================================================
> --- linux.git7.orig/drivers/gpio/pcf857x.c 2008-12-12 13:34:33.000000000 +0000
> +++ linux.git7/drivers/gpio/pcf857x.c 2008-12-12 13:34:54.000000000 +0000
> @@ -189,7 +189,7 @@ static int pcf857x_probe(struct i2c_clie
>
> pdata = client->dev.platform_data;
> if (!pdata)
> - return -ENODEV;
> + return -EINVAL;
>
> /* Allocate, initialize, and register this gpio_chip. */
> gpio = kzalloc(sizeof *gpio, GFP_KERNEL);
> @@ -249,7 +249,7 @@ static int pcf857x_probe(struct i2c_clie
> status = i2c_read_le16(client);
>
> } else
> - status = -ENODEV;
> + status = -EINVAL;
>
> if (status < 0)
> goto fail;
>
> --
> Ben (ben-elnMNo+KYs3YtjvyW6yDsg@public.gmane.org, http://www.fluff.org/)
>
> 'a smiley only costs 4 bytes'
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
--
Ben (ben-elnMNo+KYs3YtjvyW6yDsg@public.gmane.org, http://www.fluff.org/)
'a smiley only costs 4 bytes'
next prev parent reply other threads:[~2008-12-14 21:33 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-12-12 15:24 GPIO: Fix probe() error return in gpio driver probes Ben Dooks
[not found] ` <20081212152426.745254309-elnMNo+KYs3pIgCt6eIbzw@public.gmane.org>
2008-12-14 21:33 ` Ben Dooks [this message]
[not found] ` <20081214213349.GA19483-elnMNo+KYs3pIgCt6eIbzw@public.gmane.org>
2008-12-15 0:11 ` David Brownell
[not found] ` <200812141611.17555.david-b-yBeKhBN/0LDR7s880joybQ@public.gmane.org>
2008-12-15 7:46 ` Jean Delvare
[not found] ` <20081215084600.5d237fea-ig7AzVSIIG7kN2dkZ6Wm7A@public.gmane.org>
2008-12-15 10:16 ` Ben Dooks
[not found] ` <20081215101616.GB12431-elnMNo+KYs3pIgCt6eIbzw@public.gmane.org>
2008-12-15 10:22 ` Jean Delvare
[not found] ` <20081215112226.18f7fb29-ig7AzVSIIG7kN2dkZ6Wm7A@public.gmane.org>
2008-12-18 18:16 ` David Brownell
[not found] ` <200812181016.28184.david-b-yBeKhBN/0LDR7s880joybQ@public.gmane.org>
2008-12-18 22:29 ` Ben Dooks
2008-12-15 10:15 ` Ben Dooks
-- strict thread matches above, loose matches on Subject: below --
2009-01-07 12:56 ben-elnMNo+KYs3pIgCt6eIbzw
[not found] ` <20090107125619.052023040-elnMNo+KYs3pIgCt6eIbzw@public.gmane.org>
2009-01-08 12:20 ` Ben Dooks
2009-01-07 13:03 Ben Dooks
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20081214213349.GA19483@fluff.org.uk \
--to=ben-linux-elnmno+kys3ytjvyw6ydsg@public.gmane.org \
--cc=dbrownell-Rn4VEauK+AKRv+LV9MX5uipxlwaOVQ5f@public.gmane.org \
--cc=linux-i2c-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox