Re: Move eeprom drivers to drivers/misc/eeprom

[Wolfram Sang <w.sang-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>]

[-- Attachment #1: Type: text/plain, Size: 1665 bytes --]

On Tue, Jan 27, 2009 at 09:04:42AM +0100, Jean Delvare wrote:

> > 
> > Now that thhis is in mainline ... I suggest two more changes:
> > 
> >  - at24 (i2c eeprom) doesn't need to be EXPERIMENTAL
> > 
> >  - we still need interfaces whereby kernel code can be
> >    given handles to the EEPROM devices, and then use
> >    them to read board config data out during boot.
> > 
> > Obviously, the first one is easy.  ;)
> 
> Indeed, but where's the patch?

I may be missing some irony here, but just in case I don't, here is a
patch :)

===

From 622e104ea7c0ee99c631701919289792c8a890a4 Mon Sep 17 00:00:00 2001
From: Wolfram Sang <w.sang-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
Date: Tue, 27 Jan 2009 10:46:11 +0100
Subject: [PATCH] at24: remove EXPERIMENTAL

This driver has been widely used since inclusion and no problems have
been reported.

Signed-off-by: Wolfram Sang <w.sang-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
---
 drivers/misc/eeprom/Kconfig |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)

diff --git a/drivers/misc/eeprom/Kconfig b/drivers/misc/eeprom/Kconfig
index c76df8c..89fec05 100644
--- a/drivers/misc/eeprom/Kconfig
+++ b/drivers/misc/eeprom/Kconfig
@@ -2,7 +2,7 @@ menu "EEPROM support"
 
 config EEPROM_AT24
 	tristate "I2C EEPROMs from most vendors"
-	depends on I2C && SYSFS && EXPERIMENTAL
+	depends on I2C && SYSFS
 	help
 	  Enable this driver to get read/write support to most I2C EEPROMs,
 	  after you configure the driver to know about each EEPROM on

-- 
  Dipl.-Ing. Wolfram Sang | http://www.pengutronix.de
 Pengutronix - Linux Solutions for Science and Industry

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 197 bytes --]