[PATCH RESEND] imx/i2c: Make disable_delay a per-device variable

[PATCH RESEND] imx/i2c: Make disable_delay a per-device variable

[Wolfram Sang]

[-- Attachment #1: Type: text/plain, Size: 2326 bytes --]


'disable_delay' was static which is wrong as it is calculated using the per-device
bus speed. This patch turns 'disable_delay' into a per-device variable.

Reported-by: Sascha Hauer <s.hauer-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
Signed-off-by: Wolfram Sang <w.sang-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
Acked-by: Guennadi Liakhovetski <g.liakhovetski-Mmb7MZpHnFY@public.gmane.org>
Acked-by: Darius Augulis <augulis.darius-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
---

Ben, can you pick it up? Any plans when pushing your patches for 2.6.30?

 drivers/i2c/busses/i2c-imx.c |    7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)

Index: .kernel/drivers/i2c/busses/i2c-imx.c
===================================================================
--- .kernel.orig/drivers/i2c/busses/i2c-imx.c
+++ .kernel/drivers/i2c/busses/i2c-imx.c
@@ -86,8 +86,6 @@
 /** Variables ******************************************************************
 *******************************************************************************/
 
-static unsigned int disable_delay;	/* Dummy delay */
-
 /*
  * sorted list of clock divider, register value pairs
  * taken from table 26-5, p.26-9, Freescale i.MX
@@ -121,6 +119,7 @@ struct imx_i2c_struct {
 	int			irq;
 	wait_queue_head_t	queue;
 	unsigned long		i2csr;
+	unsigned int 		disable_delay;
 };
 
 /** Functions for IMX I2C adapter driver ***************************************
@@ -212,7 +211,7 @@ static void i2c_imx_stop(struct imx_i2c_
 	 * This delay caused by an i.MXL hardware bug.
 	 * If no (or too short) delay, no "STOP" bit will be generated.
 	 */
-	udelay(disable_delay);
+	udelay(i2c_imx->disable_delay);
 	/* Disable I2C controller */
 	writeb(0, i2c_imx->base + IMX_I2C_I2CR);
 }
@@ -243,7 +242,7 @@ static void __init i2c_imx_set_clk(struc
 	 * This delay is used in I2C bus disable function
 	 * to fix chip hardware bug.
 	 */
-	disable_delay = (500000U * i2c_clk_div[i][0]
+	i2c_imx->disable_delay = (500000U * i2c_clk_div[i][0]
 		+ (i2c_clk_rate / 2) - 1) / (i2c_clk_rate / 2);
 
 	/* dev_dbg() can't be used, because adapter is not yet registered */
-- 
Pengutronix e.K.                           | Wolfram Sang                |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 197 bytes --]