From: Jean Delvare <khali-PUYAD+kWke1g9hUCZPvPmw@public.gmane.org>
To: Linux I2C <linux-i2c-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>
Cc: David Brownell
<dbrownell-Rn4VEauK+AKRv+LV9MX5uipxlwaOVQ5f@public.gmane.org>
Subject: [PATCH 5/6] i2c: Kill is_newstyle_driver
Date: Sat, 2 May 2009 11:43:34 +0200 [thread overview]
Message-ID: <20090502114334.155ecb51@hyperion.delvare> (raw)
In-Reply-To: <20090502113856.39940f1e-ig7AzVSIIG7kN2dkZ6Wm7A@public.gmane.org>
Legacy i2c drivers are gone, all drivers are new-style now, so there
is no point to check.
Signed-off-by: Jean Delvare <khali-PUYAD+kWke1g9hUCZPvPmw@public.gmane.org>
Cc: David Brownell <dbrownell-Rn4VEauK+AKRv+LV9MX5uipxlwaOVQ5f@public.gmane.org>
---
drivers/i2c/i2c-core.c | 32 +-------------------------------
include/linux/i2c.h | 2 --
2 files changed, 1 insertion(+), 33 deletions(-)
--- linux-2.6.30-rc4.orig/drivers/i2c/i2c-core.c 2009-04-30 18:02:04.000000000 +0200
+++ linux-2.6.30-rc4/drivers/i2c/i2c-core.c 2009-04-30 18:02:07.000000000 +0200
@@ -42,8 +42,6 @@
static DEFINE_MUTEX(core_lock);
static DEFINE_IDR(i2c_adapter_idr);
-#define is_newstyle_driver(d) ((d)->probe || (d)->remove || (d)->detect)
-
static int i2c_check_addr(struct i2c_adapter *adapter, int addr);
static int i2c_detect(struct i2c_adapter *adapter, struct i2c_driver *driver);
@@ -65,12 +63,6 @@ static int i2c_device_match(struct devic
struct i2c_client *client = to_i2c_client(dev);
struct i2c_driver *driver = to_i2c_driver(drv);
- /* make legacy i2c drivers bypass driver model probing entirely;
- * such drivers scan each i2c adapter/bus themselves.
- */
- if (!is_newstyle_driver(driver))
- return 0;
-
/* match on an id table if there is one */
if (driver->id_table)
return i2c_match_id(driver->id_table, client) != NULL;
@@ -177,12 +169,6 @@ static int i2c_device_resume(struct devi
return driver->resume(to_i2c_client(dev));
}
-static void i2c_client_release(struct device *dev)
-{
- struct i2c_client *client = to_i2c_client(dev);
- complete(&client->released);
-}
-
static void i2c_client_dev_release(struct device *dev)
{
kfree(to_i2c_client(dev));
@@ -287,12 +273,7 @@ i2c_new_device(struct i2c_adapter *adap,
client->dev.parent = &client->adapter->dev;
client->dev.bus = &i2c_bus_type;
-
- if (client->driver && !is_newstyle_driver(client->driver)) {
- client->dev.release = i2c_client_release;
- dev_set_uevent_suppress(&client->dev, 1);
- } else
- client->dev.release = i2c_client_dev_release;
+ client->dev.release = i2c_client_dev_release;
dev_set_name(&client->dev, "%d-%04x", i2c_adapter_id(adap),
client->addr);
@@ -326,14 +307,6 @@ EXPORT_SYMBOL_GPL(i2c_new_device);
void i2c_unregister_device(struct i2c_client *client)
{
struct i2c_adapter *adapter = client->adapter;
- struct i2c_driver *driver = client->driver;
-
- if (driver && !is_newstyle_driver(driver)) {
- dev_err(&client->dev, "can't unregister devices "
- "with legacy drivers\n");
- WARN_ON(1);
- return;
- }
mutex_lock(&adapter->clist_lock);
list_del(&client->list);
@@ -746,9 +719,6 @@ static int __detach_adapter(struct devic
i2c_unregister_device(client);
}
- if (is_newstyle_driver(driver))
- return 0;
-
if (driver->detach_adapter) {
if (driver->detach_adapter(adapter))
dev_err(&adapter->dev,
--- linux-2.6.30-rc4.orig/include/linux/i2c.h 2009-04-30 18:02:02.000000000 +0200
+++ linux-2.6.30-rc4/include/linux/i2c.h 2009-04-30 18:02:12.000000000 +0200
@@ -180,7 +180,6 @@ struct i2c_driver {
* @irq: indicates the IRQ generated by this device (if any)
* @list: list of active/busy clients (DEPRECATED)
* @detected: member of an i2c_driver.clients list
- * @released: used to synchronize client releases & detaches and references
*
* An i2c_client identifies a single device (i.e. chip) connected to an
* i2c bus. The behaviour exposed to Linux is defined by the driver
@@ -198,7 +197,6 @@ struct i2c_client {
int irq; /* irq issued by device */
struct list_head list; /* DEPRECATED */
struct list_head detected;
- struct completion released;
};
#define to_i2c_client(d) container_of(d, struct i2c_client, dev)
--
Jean Delvare
next prev parent reply other threads:[~2009-05-02 9:43 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-05-02 9:38 [PATCH 0/6] i2c: Get rid of the legacy binding model Jean Delvare
[not found] ` <20090502113856.39940f1e-ig7AzVSIIG7kN2dkZ6Wm7A@public.gmane.org>
2009-05-02 9:39 ` [PATCH 1/6] i2c: Kill client_register and client_unregister methods Jean Delvare
2009-05-02 9:40 ` [PATCH 2/6] i2c: Get rid of the legacy binding model Jean Delvare
[not found] ` <20090502114020.41c38247-ig7AzVSIIG7kN2dkZ6Wm7A@public.gmane.org>
2009-05-02 19:03 ` David Brownell
[not found] ` <200905021203.43974.david-b-yBeKhBN/0LDR7s880joybQ@public.gmane.org>
2009-05-03 7:25 ` Jean Delvare
2009-05-02 9:41 ` [PATCH 3/6] i2c: Drop i2c_probe function Jean Delvare
2009-05-02 9:42 ` [PATCH 4/6] i2c: Merge i2c_attach_client into i2c_new_device Jean Delvare
2009-05-02 9:43 ` Jean Delvare [this message]
2009-05-02 9:45 ` [PATCH 6/6] i2c: Kill the redundant client list Jean Delvare
2009-05-02 18:16 ` [PATCH 0/6] i2c: Get rid of the legacy binding model David Brownell
2009-05-02 19:14 ` David Brownell
[not found] ` <200905021214.02937.david-b-yBeKhBN/0LDR7s880joybQ@public.gmane.org>
2009-05-03 7:05 ` Jean Delvare
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20090502114334.155ecb51@hyperion.delvare \
--to=khali-puyad+kwke1g9huczpvpmw@public.gmane.org \
--cc=dbrownell-Rn4VEauK+AKRv+LV9MX5uipxlwaOVQ5f@public.gmane.org \
--cc=linux-i2c-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox