From: Sascha Hauer <s.hauer-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
To: Russell King - ARM Linux <linux-lFZ/pmaqli7XmaaqVzeoHQ@public.gmane.org>
Cc: Ben Dooks <ben-linux-elnMNo+KYs3YtjvyW6yDsg@public.gmane.org>,
linux-i2c-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Subject: Re: I2C device board info
Date: Mon, 20 Jul 2009 08:20:34 +0200 [thread overview]
Message-ID: <20090720062034.GV2714@pengutronix.de> (raw)
In-Reply-To: <20090718105600.GA29887-l+eeeJia6m9vn6HldHNs0ANdhmdF6hFW@public.gmane.org>
On Sat, Jul 18, 2009 at 11:56:00AM +0100, Russell King - ARM Linux wrote:
> Sascha,
>
> I've noticed the following in i2c_board_info initializers:
>
> arch/arm/mach-mx2/pcm038.c: I2C_BOARD_INFO("rtc-pcf8563", 0x51),
> arch/arm/mach-mx2/pcm038.c- .type = "pcf8563"
>
> However, I2C_BOARD_INFO is defined as:
>
> #define I2C_BOARD_INFO(dev_type, dev_addr) \
> .type = dev_type, .addr = (dev_addr)
>
> so you're initializing .type twice. Only one of these will be used,
> so you may want to correct these entries. (Looking at Realview, the
> one which is used is the second - so in the above case, .type will
> be initialized with current gcc to "pcf8563" not "rtc-pcf8563".)
>
Ok, here we go:
>From 89b5958a911ddcf1079e0dd6bbf2287f04c358d9 Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
Date: Mon, 20 Jul 2009 08:18:47 +0200
Subject: [PATCH] ARM: mxc: Fix i2c_board_info definitions
Fix i2c_board_info definitions - we were defining the 'type' field
of these structures twice since the first argument of I2C_BOARD_INFO
sets this field. Move the second definition into I2C_BOARD_INFO().
Signed-off-by: Sascha Hauer <s.hauer-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
---
arch/arm/mach-mx1/mx1ads.c | 6 ++----
arch/arm/mach-mx2/eukrea_cpuimx27.c | 3 +--
arch/arm/mach-mx2/pcm038.c | 12 ++++--------
arch/arm/mach-mx3/pcm037.c | 3 +--
arch/arm/mach-mx3/pcm043.c | 3 +--
5 files changed, 9 insertions(+), 18 deletions(-)
diff --git a/arch/arm/mach-mx1/mx1ads.c b/arch/arm/mach-mx1/mx1ads.c
index 6af064d..30f04e5 100644
--- a/arch/arm/mach-mx1/mx1ads.c
+++ b/arch/arm/mach-mx1/mx1ads.c
@@ -104,12 +104,10 @@ static struct imxi2c_platform_data mx1ads_i2c_data = {
static struct i2c_board_info mx1ads_i2c_devices[] = {
{
- I2C_BOARD_INFO("pcf857x", 0x22),
- .type = "pcf8575",
+ I2C_BOARD_INFO("pcf8575", 0x22),
.platform_data = &pcf857x_data[0],
}, {
- I2C_BOARD_INFO("pcf857x", 0x24),
- .type = "pcf8575",
+ I2C_BOARD_INFO("pcf8575", 0x24),
.platform_data = &pcf857x_data[1],
},
};
diff --git a/arch/arm/mach-mx2/eukrea_cpuimx27.c b/arch/arm/mach-mx2/eukrea_cpuimx27.c
index a2c4181..7b18760 100644
--- a/arch/arm/mach-mx2/eukrea_cpuimx27.c
+++ b/arch/arm/mach-mx2/eukrea_cpuimx27.c
@@ -135,8 +135,7 @@ static struct imxi2c_platform_data eukrea_cpuimx27_i2c_1_data = {
static struct i2c_board_info eukrea_cpuimx27_i2c_devices[] = {
{
- I2C_BOARD_INFO("rtc-pcf8563", 0x51),
- .type = "pcf8563"
+ I2C_BOARD_INFO("pcf8563", 0x51),
},
};
diff --git a/arch/arm/mach-mx2/pcm038.c b/arch/arm/mach-mx2/pcm038.c
index 638d078..9a3483c 100644
--- a/arch/arm/mach-mx2/pcm038.c
+++ b/arch/arm/mach-mx2/pcm038.c
@@ -186,17 +186,13 @@ static struct at24_platform_data board_eeprom = {
};
static struct i2c_board_info pcm038_i2c_devices[] = {
- [0] = {
+ {
I2C_BOARD_INFO("at24", 0x52), /* E0=0, E1=1, E2=0 */
.platform_data = &board_eeprom,
- },
- [1] = {
- I2C_BOARD_INFO("rtc-pcf8563", 0x51),
- .type = "pcf8563"
- },
- [2] = {
+ }, {
+ I2C_BOARD_INFO("pcf8563", 0x51),
+ }, {
I2C_BOARD_INFO("lm75", 0x4a),
- .type = "lm75"
}
};
diff --git a/arch/arm/mach-mx3/pcm037.c b/arch/arm/mach-mx3/pcm037.c
index 6a3a1a9..d307887 100644
--- a/arch/arm/mach-mx3/pcm037.c
+++ b/arch/arm/mach-mx3/pcm037.c
@@ -266,8 +266,7 @@ static struct i2c_board_info pcm037_i2c_devices[] = {
I2C_BOARD_INFO("at24", 0x52), /* E0=0, E1=1, E2=0 */
.platform_data = &board_eeprom,
}, {
- I2C_BOARD_INFO("rtc-pcf8563", 0x51),
- .type = "pcf8563",
+ I2C_BOARD_INFO("pcf8563", 0x51),
}
};
#endif
diff --git a/arch/arm/mach-mx3/pcm043.c b/arch/arm/mach-mx3/pcm043.c
index 7c7d3cc..e43276e 100644
--- a/arch/arm/mach-mx3/pcm043.c
+++ b/arch/arm/mach-mx3/pcm043.c
@@ -133,8 +133,7 @@ static struct i2c_board_info pcm043_i2c_devices[] = {
I2C_BOARD_INFO("at24", 0x52), /* E0=0, E1=1, E2=0 */
.platform_data = &board_eeprom,
}, {
- I2C_BOARD_INFO("rtc-pcf8563", 0x51),
- .type = "pcf8563",
+ I2C_BOARD_INFO("pcf8563", 0x51),
}
};
#endif
--
1.6.3.3
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
next prev parent reply other threads:[~2009-07-20 6:20 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-07-18 10:56 I2C device board info Russell King - ARM Linux
[not found] ` <20090718105600.GA29887-l+eeeJia6m9vn6HldHNs0ANdhmdF6hFW@public.gmane.org>
2009-07-18 13:08 ` Jean Delvare
[not found] ` <20090718150803.68fea223-ig7AzVSIIG7kN2dkZ6Wm7A@public.gmane.org>
2009-07-18 13:12 ` Russell King - ARM Linux
[not found] ` <20090718131237.GB4120-l+eeeJia6m9vn6HldHNs0ANdhmdF6hFW@public.gmane.org>
2009-07-18 13:29 ` Jean Delvare
[not found] ` <20090718152918.09912dea-ig7AzVSIIG7kN2dkZ6Wm7A@public.gmane.org>
2009-07-18 13:57 ` Russell King - ARM Linux
[not found] ` <20090718135713.GC4120-l+eeeJia6m9vn6HldHNs0ANdhmdF6hFW@public.gmane.org>
2009-07-18 14:39 ` Jean Delvare
2009-07-18 15:45 ` Ben Dooks
2009-07-20 6:20 ` Sascha Hauer [this message]
[not found] ` <20090720062034.GV2714-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
2009-07-20 7:34 ` Jean Delvare
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20090720062034.GV2714@pengutronix.de \
--to=s.hauer-bicnvbalz9megne8c9+irq@public.gmane.org \
--cc=ben-linux-elnMNo+KYs3YtjvyW6yDsg@public.gmane.org \
--cc=linux-i2c-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-lFZ/pmaqli7XmaaqVzeoHQ@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).