From: Jean Delvare <khali-PUYAD+kWke1g9hUCZPvPmw@public.gmane.org>
To: Linux I2C <linux-i2c-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>
Cc: Kay Sievers <kay.sievers-tD+1rO4QERM@public.gmane.org>
Subject: [PATCH 2/4] i2c: Convert i2c clients to a device type
Date: Wed, 5 Aug 2009 11:12:25 +0200 [thread overview]
Message-ID: <20090805111225.0030b14e@hyperion.delvare> (raw)
In-Reply-To: <20090805110537.73735169-ig7AzVSIIG7kN2dkZ6Wm7A@public.gmane.org>
This is required for upcoming changes.
Signed-off-by: Jean Delvare <khali-PUYAD+kWke1g9hUCZPvPmw@public.gmane.org>
Cc: Kay Sievers <kay.sievers-tD+1rO4QERM@public.gmane.org>
---
drivers/i2c/i2c-core.c | 67 +++++++++++++++++++++++++++++++++---------------
1 file changed, 47 insertions(+), 20 deletions(-)
--- linux-2.6.31-rc1.orig/drivers/i2c/i2c-core.c 2009-06-30 08:48:46.000000000 +0200
+++ linux-2.6.31-rc1/drivers/i2c/i2c-core.c 2009-06-30 15:31:33.000000000 +0200
@@ -64,9 +64,13 @@ static const struct i2c_device_id *i2c_m
static int i2c_device_match(struct device *dev, struct device_driver *drv)
{
- struct i2c_client *client = to_i2c_client(dev);
- struct i2c_driver *driver = to_i2c_driver(drv);
+ struct i2c_client *client = i2c_verify_client(dev);
+ struct i2c_driver *driver;
+
+ if (!client)
+ return 0;
+ driver = to_i2c_driver(drv);
/* match on an id table if there is one */
if (driver->id_table)
return i2c_match_id(driver->id_table, client) != NULL;
@@ -94,10 +98,14 @@ static int i2c_device_uevent(struct devi
static int i2c_device_probe(struct device *dev)
{
- struct i2c_client *client = to_i2c_client(dev);
- struct i2c_driver *driver = to_i2c_driver(dev->driver);
+ struct i2c_client *client = i2c_verify_client(dev);
+ struct i2c_driver *driver;
int status;
+ if (!client)
+ return 0;
+
+ driver = to_i2c_driver(dev->driver);
if (!driver->probe || !driver->id_table)
return -ENODEV;
client->driver = driver;
@@ -114,11 +122,11 @@ static int i2c_device_probe(struct devic
static int i2c_device_remove(struct device *dev)
{
- struct i2c_client *client = to_i2c_client(dev);
+ struct i2c_client *client = i2c_verify_client(dev);
struct i2c_driver *driver;
int status;
- if (!dev->driver)
+ if (!client || !dev->driver)
return 0;
driver = to_i2c_driver(dev->driver);
@@ -136,37 +144,40 @@ static int i2c_device_remove(struct devi
static void i2c_device_shutdown(struct device *dev)
{
+ struct i2c_client *client = i2c_verify_client(dev);
struct i2c_driver *driver;
- if (!dev->driver)
+ if (!client || !dev->driver)
return;
driver = to_i2c_driver(dev->driver);
if (driver->shutdown)
- driver->shutdown(to_i2c_client(dev));
+ driver->shutdown(client);
}
static int i2c_device_suspend(struct device *dev, pm_message_t mesg)
{
+ struct i2c_client *client = i2c_verify_client(dev);
struct i2c_driver *driver;
- if (!dev->driver)
+ if (!client || !dev->driver)
return 0;
driver = to_i2c_driver(dev->driver);
if (!driver->suspend)
return 0;
- return driver->suspend(to_i2c_client(dev), mesg);
+ return driver->suspend(client, mesg);
}
static int i2c_device_resume(struct device *dev)
{
+ struct i2c_client *client = i2c_verify_client(dev);
struct i2c_driver *driver;
- if (!dev->driver)
+ if (!client || !dev->driver)
return 0;
driver = to_i2c_driver(dev->driver);
if (!driver->resume)
return 0;
- return driver->resume(to_i2c_client(dev));
+ return driver->resume(client);
}
static void i2c_client_dev_release(struct device *dev)
@@ -188,18 +199,28 @@ show_modalias(struct device *dev, struct
return sprintf(buf, "%s%s\n", I2C_MODULE_PREFIX, client->name);
}
-static struct device_attribute i2c_dev_attrs[] = {
- __ATTR(name, S_IRUGO, show_client_name, NULL),
+static DEVICE_ATTR(name, S_IRUGO, show_client_name, NULL);
+static DEVICE_ATTR(modalias, S_IRUGO, show_modalias, NULL);
+
+static struct attribute *i2c_dev_attrs[] = {
+ &dev_attr_name.attr,
/* modalias helps coldplug: modprobe $(cat .../modalias) */
- __ATTR(modalias, S_IRUGO, show_modalias, NULL),
- { },
+ &dev_attr_modalias.attr,
+ NULL
+};
+
+static struct attribute_group i2c_dev_attr_group = {
+ .attrs = i2c_dev_attrs,
+};
+
+static struct attribute_group *i2c_dev_attr_groups[] = {
+ &i2c_dev_attr_group,
+ NULL
};
struct bus_type i2c_bus_type = {
.name = "i2c",
- .dev_attrs = i2c_dev_attrs,
.match = i2c_device_match,
- .uevent = i2c_device_uevent,
.probe = i2c_device_probe,
.remove = i2c_device_remove,
.shutdown = i2c_device_shutdown,
@@ -208,6 +229,12 @@ struct bus_type i2c_bus_type = {
};
EXPORT_SYMBOL_GPL(i2c_bus_type);
+static struct device_type i2c_client_type = {
+ .groups = i2c_dev_attr_groups,
+ .uevent = i2c_device_uevent,
+ .release = i2c_client_dev_release,
+};
+
/**
* i2c_verify_client - return parameter as i2c_client, or NULL
@@ -220,7 +247,7 @@ EXPORT_SYMBOL_GPL(i2c_bus_type);
*/
struct i2c_client *i2c_verify_client(struct device *dev)
{
- return (dev->bus == &i2c_bus_type)
+ return (dev->type == &i2c_client_type)
? to_i2c_client(dev)
: NULL;
}
@@ -273,7 +300,7 @@ i2c_new_device(struct i2c_adapter *adap,
client->dev.parent = &client->adapter->dev;
client->dev.bus = &i2c_bus_type;
- client->dev.release = i2c_client_dev_release;
+ client->dev.type = &i2c_client_type;
dev_set_name(&client->dev, "%d-%04x", i2c_adapter_id(adap),
client->addr);
--
Jean Delvare
next prev parent reply other threads:[~2009-08-05 9:12 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-08-05 9:05 [PATCH 0/4] Convert i2c adapters from class devices to bus devices Jean Delvare
[not found] ` <20090805110537.73735169-ig7AzVSIIG7kN2dkZ6Wm7A@public.gmane.org>
2009-08-05 9:11 ` [PATCH 1/4] Add support for compatibility classes Jean Delvare
2009-08-05 9:12 ` Jean Delvare [this message]
2009-08-05 9:13 ` [PATCH 3/4] i2c: Convert i2c adapters to bus devices Jean Delvare
2009-08-05 9:14 ` [PATCH 4/4] i2c: Provide compatibility links for i2c adapters Jean Delvare
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20090805111225.0030b14e@hyperion.delvare \
--to=khali-puyad+kwke1g9huczpvpmw@public.gmane.org \
--cc=kay.sievers-tD+1rO4QERM@public.gmane.org \
--cc=linux-i2c-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox