* [PATCHv3 3/3] Regulator: Adding TPS65023 and TPS6507x in Kconfig and Makefile
@ 2009-08-20 19:09 Anuj Aggarwal
2009-08-20 19:26 ` Mark Brown
0 siblings, 1 reply; 2+ messages in thread
From: Anuj Aggarwal @ 2009-08-20 19:09 UTC (permalink / raw)
To: broonie-GFdadSzt00ze9xe1eoZjHA, lrg-kDsPt+C1G03kYMGBc/C6ZA,
linux-omap-u79uwXL29TY76Z2rM5mHXA,
linux-kernel-u79uwXL29TY76Z2rM5mHXA,
felipe.balbi-xNZwKgViW5gAvxtiuMwx3w, tony-4v6yS6AI5VpBDgjK7y7TUQ,
linux-i2c-u79uwXL29TY76Z2rM5mHXA
Cc: Anuj Aggarwal
Adding TPS65023 and TPS6507x regulator driver support in
drivers/regulator/Makefile and drivers/regulator/Kconfig
Signed-off-by: Anuj Aggarwal <anuj.aggarwal-l0cyMroinI0@public.gmane.org>
---
drivers/regulator/Kconfig | 16 ++++++++++++++++
drivers/regulator/Makefile | 3 +++
2 files changed, 19 insertions(+), 0 deletions(-)
diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index f431779..8568f3e 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -117,4 +117,20 @@ config REGULATOR_LP3971
Say Y here to support the voltage regulators and convertors
on National Semiconductors LP3971 PMIC
+config REGULATOR_TPS65023
+ tristate "TI TPS65023 Power regulators"
+ depends on I2C
+ help
+ This driver supports TPS65023 voltage regulator chips. TPS65023 provides
+ three step-down converters and two general-purpose LDO voltage regulators.
+ It supports TI's software based Class-2 SmartReflex implementation.
+
+config REGULATOR_TPS6507X
+ tristate "TI TPS6507X Power regulators"
+ depends on I2C
+ help
+ This driver supports TPS6507X voltage regulator chips. TPS6507X provides
+ three step-down converters and two general-purpose LDO voltage regulators.
+ It supports TI's software based Class-2 SmartReflex implementation.
+
endif
diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
index 4d762c4..5263913 100644
--- a/drivers/regulator/Makefile
+++ b/drivers/regulator/Makefile
@@ -17,4 +17,7 @@ obj-$(CONFIG_REGULATOR_WM8400) += wm8400-regulator.o
obj-$(CONFIG_REGULATOR_DA903X) += da903x.o
obj-$(CONFIG_REGULATOR_PCF50633) += pcf50633-regulator.o
+obj-$(CONFIG_REGULATOR_TPS65023) += tps65023-regulator.o
+obj-$(CONFIG_REGULATOR_TPS6507X) += tps6507x-regulator.o
+
ccflags-$(CONFIG_REGULATOR_DEBUG) += -DDEBUG
--
1.6.2.4
^ permalink raw reply related [flat|nested] 2+ messages in thread
* Re: [PATCHv3 3/3] Regulator: Adding TPS65023 and TPS6507x in Kconfig and Makefile
2009-08-20 19:09 [PATCHv3 3/3] Regulator: Adding TPS65023 and TPS6507x in Kconfig and Makefile Anuj Aggarwal
@ 2009-08-20 19:26 ` Mark Brown
0 siblings, 0 replies; 2+ messages in thread
From: Mark Brown @ 2009-08-20 19:26 UTC (permalink / raw)
To: Anuj Aggarwal
Cc: lrg, linux-omap, linux-kernel, felipe.balbi, tony, linux-i2c
On Fri, Aug 21, 2009 at 12:39:44AM +0530, Anuj Aggarwal wrote:
> Adding TPS65023 and TPS6507x regulator driver support in
> drivers/regulator/Makefile and drivers/regulator/Kconfig
>
> Signed-off-by: Anuj Aggarwal <anuj.aggarwal@ti.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2009-08-20 19:26 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2009-08-20 19:09 [PATCHv3 3/3] Regulator: Adding TPS65023 and TPS6507x in Kconfig and Makefile Anuj Aggarwal
2009-08-20 19:26 ` Mark Brown
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).